Treatment of Food Processing Industrial Emuent Using Coagulation and Sequential Batch Reactor

Authors

  • Azmi Aris Department of Environmental Engineering Faculty of Civil Engineering, UTM
  • H. P. Siang Department of Environmental Engineering Faculty of Civil Engineering, UTM
  • K. K. Tan Department of Environmental Engineering Faculty of Civil Engineering, UTM

DOI:

https://doi.org/10.11113/mjce.v12.15631

Abstract

The performance of combined treatment processes, namely coagulation and
Sequential Batch Reactor (SBR) to treat effluent from food processing industry
was evaluated. The experimental study was conducted in a batch mode using
pilot-scale reactor. The parameters used in assessing the treatment system were
BOD" COD and SS. The optimum amount of chemicals for the coagulation
process ranges from 20 mgIL to 80 mgIL for coagulant and 60 mgIL to 220 mgIL
for polymer while the optimum pH ranges from 5.5 to 7.0. The compliance of
Standard A of the Environmental Quality Act was met using the combined
process with SBR retention time of 6 hours.

References

[I) Barnes, D., Forster, C.P., Hrudey, S.E.(Editors), Surveys in Industrial

Wastewater Treatment: Food and Allied Industries (Volume I), Pitman

Publishing Limited, 1984.

Akta Kualiti Alam Sekeliling 1974 (Akta 127) dan Peraturan-peraturan,

International Law Book Services, 1991.

Standard Method for the Examination of Water and Wastewater, 181h

Edition, APHA, AWWA and WER, 1992.

Wun-Jern, N., Sequencing Batch Reactor (SBR) Treatment of Wastewater,

Environmental Sanitation Reviews, v'01. 28, September 1989.

Downloads

Published

2018-02-20

Issue

Section

Articles

How to Cite

Treatment of Food Processing Industrial Emuent Using Coagulation and Sequential Batch Reactor. (2018). Malaysian Journal of Civil Engineering, 12(1). https://doi.org/10.11113/mjce.v12.15631