DISSEMINATION OF KNOWLEDGE: OVERVIEW IN MALAYSIAN CONSTRUCTION ORGANISATION

Authors

  • Sahamir S.R Sahamir S.R UTM Construction Research Centre, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
  • Zakaria R Zakaria R UTM Construction Research Centre, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
  • Ibrahim O Ibrahim O Faculty of Computing, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
  • Nawawi A.H. Nawawi A.H. Faculty of Architecture Planning and Surveying, Universiti Teknologi Mara, 40450 Shah Alam, Selangor Malaysia
  • Mazlan A.N. Mazlan A.N. UTM Construction Research Centre, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/mjce.v25.15870

Keywords:

Chao Phraya River basin, Estimation of inundated area, Flood in 2011, Satellite data, Knowledge, Knowledge sharing, Construction, Organisation

Abstract

Construction projects require proper knowledge sharing implementation in order to satisfy the demand of today’s knowledgeable and aggressive clients. The effective knowledge sharing process in construction projects is certainly one of the key components to success. It is crucial for the construction industry to develop a new strategy in order to align with the other industries especially in the knowledge sharing aspect. The primary aim for this paper is to determine factors that contribute to barriers for knowledge sharing implementation in Malaysian construction organisation. This study also identify solutions that construction organisation should adapt strategies towards achieving proper knowledge sharing implementation. The factors identification process was collected through intensive literature study and supported by 2 numbers of interview sessions conducted in contractor organisation. 90 sets of questionnaire were distributed in determining the barriers and solutions. As the results, the factor of intangible benefit contributed to the barriers. Furthermore, role model in organisation is among solutions for Malaysian contractor organisation in order to promote knowledge sharing initiative in the industry. The output of this study is recommended for a milestone of knowledge sharing studies in Malaysia particularly to construction industry to transform in knowledge era in the new globalised world.

References

Amani, N., Ali, N.M., Mohammed, A.H., Samat, R.A. (2012) "A Survey on the Implementation Of Facilities Maintenance Management System Of Building In Iran", Malaysian Journal of

Civil Engineering, Vol. 24(1) 2012, pp. 85-95

Arayici, Y., Aouad, G. and Ahmed, V. (2005) Requirements engineering for innovative integrated ICT systems for the cnstrcution industry.Construction innovation.175-200.

Argote, L. (1999) Organizational Learning: Creating, Retaining and Transferring Knowledge, Kluwer Publications, Boston, MA.

Argote, L., Ingram, P., Levine, J. and Moreland, R. (2000) Knowledge transfer in organizations.OrganisationalBehaviour and Human Decision Processes, Vol. 82 No. 1, pp.

-8.

Barney, J.B. (1991) Firm resources and sustained competitive advantage.Journal of Management, Vol. 17 No. 1, pp. 99-120.

Bechky, B.A. (2003) Sharing meaning across occupational communities: the transformation of understanding on a production floor.Organization Science, Vol. 14 No. 3, pp. 312-30.

Blair, D.C. (2002) Knowledge management: hype, hope, or help? Journal of the American Society for Information Science and Technology, Vol. 53 No. 12, pp. 1019-28.

Boisot, M. (1998) Knowledge Assets: Securing Competitive Advantage in the Information Economy.Oxford University Press, Oxford.

Brown, J.S. and Duguid, P. (2000) The Social Life of Information. Harvard Business Press, Boston, MA.

Burk, M. (1999) Knowledge management: everyone benefits by sharing information. Public Road: featuring developments in federal highway policies, programs, and research and

technology.Vol. 63.

Capon, N., Farley, J.U., Lehmann, D.R. and Hulbert, J.M. (1992) Profiles of product innovators among large US manufacturers.Management Science, Vol. 38 No. 2, pp. 157-69.

Carlile, P.R. (2004) Transferring, translating, and transforming: an integrative framework for

managing knowledge across boundaries.Organization Science, Vol. 15 No. 5, pp. 555-68.

Collins, C.J. and Clark, K.D. (2005) Existing knowledge, knowledge creation, capability, and the rate of new product introduction in high-technology firms.Academy of Management Journal, Vol. 48 No. 2, pp. 346-57.

Conner, K.R. and Prahalad, C.K. (1996) A resource based theory of the firm: knowledge versus opportunism. Organization Science, Vol. 7 No. 5, pp. 477-501.

Drucker, P. (1999) Managing oneself. Harvard Business Review, Vol. 77 No. 2, pp. 64-74.

D’ Aveni, R.A., (1995). Hypercompetition: Managing the Dynamics of Strategic Maneuvering. Free Press, New York, NY.

Egbu, C. O. (2000). The role of information technology in strategic knowledge management and its potential in the construction industry. In: Proceedings of UK National Conference on ‘Objects and Integration for Architecture, Engineering and Construction’, March 2000, BRE, Watford. s

Egbu, C.O. (2002). Information technologies for knowledge management: their usage and effectiveness. ITcon, Vol.7.

Grant, R.M. (1996a) Prospering in dynamically -competitive environments: organizational capability as knowledge integration. Organization Science, Vol. 7 No. 4, pp. 375-87.

Grant, R.M. (1996b) Toward a knowledge-based theory of the firm. Strategic Management Journal, Vol. 17, pp. 109-22.

Helmstadter, E., (2003). The Institutional Economics of knowledge sharing: Basic Issues. In Helmstadter, E. (ed.) The Economics of Knowledge Sharing: A new Institutional Approach.

Cheltenham & Northampton, M.A: Edward Elgar.

Hendriks, P. (1999) Why share knowledge? The influence of ICT on the motivation for knowledge sharing.Knowledge and Process Management, Vol. 6 No. 2, pp. 91-100.

Hofstede, G. (1997), underlying cultures & organizations: software of the mind, McGraw-Hill, New York, NY.

Jarvenpaa, S.L. and Staples, D.S. (2000) The use of collaborative electronic media for information sharing: an exploratory study of determinants. Journal of Strategic Information Systems, Vol. 9, pp. 129-54.

Juhary, A., Giap, C. T., Cheong, T. T. (2004). Knowledge management in agile organizations.Sunway College Journal 1.

Lahti, R.K. and Beyerlein, M.M. (2000) Knowledge transfer and management consulting: a look at ‘the firm’. Business Horizons, Vol. 43 No. 1, pp. 65-74.

Leonard-Barton, D. (1995) Wellsprings of Knowledge.Harvard Business Press, Boston, MA.

Li, M. and Gao, F. (2003) Why Nonaka highlights tacit knowledge: a critical review. Journal of

Knowledge Management, Vol. 7 No. 4, pp. 6-14.

Lima, C., Rezgui, Y., Wetherill, M., Zarli, A. (2002)Knowledge management for the construction industry: the e-cognos project.ITcon, Vol. 7.

Nahapiet, J. and Ghoshal, S. (1998) Social capital, intellectual capital and the organizational advantage.Academy of Management Review, Vol. 40 No. 2, pp. 242-66.

Naikal, A. &Paloti, R. (2005). Knowledge Sharing: A Key for KM Success. http://www.digitaldivide.net 19/9/2005 5.00 pm.

Newcombe, R. (1999) Procurement as a learning process. Profitable Partnering in Construction Procurement, E&FN Spon, London, pp. 285-94.

Nonaka, I. (1991) The knowledge-creating company. Harvard Business Review, Vol. 69 No. 6, pp. 96-104.

Nonaka, I. (1994) A dynamic theory of organizational knowledge creation.Organizational Science, Vol. 5 No. 1, pp. 14-37.

Nonaka, I. and Takeuchi, H. (1995) The knowledge creating company. in Smith, K.G.,

Nonaka, I. and Konno, N. (1998) The concept of ‘Ba’: building a foundation for knowledge creation. California Management Review, Vol. 40 No. 3, pp. 40-54.

Peansupap, V., and Wlaker, D. (2005) Exploratory factors influencing information and communication technology diffusion and adoption within Australian construction

organizations: a micro analysis.Construction Innovation, RMIT University.

Pervaiz, K. A. et al. (2002) Learning through knowledge management.Butterworth-Heinemann: Oxford.

Reid, F. (2003) Creating a knowledge sharing culture among diverse business units.Employment Relations Today, Vol. 30 No. 3, pp. 43-9.

Sa´enz, J., Aramburu, N. and Rivera, O. (2009) Knowledge sharing and innovation performance; a comparison between high-tech and low-tech companies.Journal of Intellectual Capital,

Vol. 10 No. 1, pp. 22-36.

Skyrme, D. J., 2002The 3Cs of knowledge sharing: culture, co-opetition and commitment. I3 update/ Entovation international news. Retrieved http://www.skyrme.com/updates/index.htm

/10/2005 3.00 pm.

Spender, J.C. (1996) Making knowledge the basis of a dynamic theory of the firm.Strategic Management Journal, Vol. 17, pp. 45-62 (special issue).

Sun, P.Y.T. and Scott, J.L. (2005) An investigation of barriers to knowledge transfer. Journal of Knowledge Management, Vol. 9 No. 2, pp. 75-90.

Truch, A., et al. (2002) Personality and Knowledge Sharing.Henley Management College.

Tsai, W. (2002) Social structure of ‘coopetition’ within a multiunit organization: coordination, competition, and intraorganizational knowledge sharing. Organization Science, Vol. 13 No. 2, pp. 179-90.

Van Den Hooff, B. and De Ridder, J.A. (2004) Knowledge sharing in context: the influence of

organizational commitment, communication climate and CMC usage on knowledge sharing. Journal of Knowledge Management, Vol. 8 No. 6, pp. 117-30.

Von Krogh, G. (2002) The communal resource and information systems. Journal of Strategic Information Systems, Vol. 11 No. 2, pp. 85-107.

Downloads

Published

2018-06-28

Issue

Section

Articles

How to Cite

DISSEMINATION OF KNOWLEDGE: OVERVIEW IN MALAYSIAN CONSTRUCTION ORGANISATION. (2018). Malaysian Journal of Civil Engineering, 25. https://doi.org/10.11113/mjce.v25.15870