EFFECT OF PLACEMENT DEPTH OF GEOCELL REINFORCEMENT IN SAND DEPOSIT: A REVIEW
DOI:
https://doi.org/10.11113/mjce.v27.15959Keywords:
Accelerated corrosion environment, GBFS, SCM, Slag clinkerization, Steel slag, Bearing capacity, geocell, soil reinforcement, sandAbstract
In general, the tensile strength of the soil is poor. For this reason, the soil will need to be strengthened. The main objective of strengthening the soil mass is to improve stability, increase bearing capacity and reduce settlements and lateral deformation. There are several methods for improving the soil. One of the approaches is the use of geosynthetic materials. Geosynthetic is a well known technique in soil reinforcement. The use of geosynthetic three dimensions, can significantly improve the soil performance and reduce costs in comparison with conventional designs. In this paper, a review of experimental test carried out by different researchers for optimum depth of geocell in the sand had been made. The test results indicated that the inclusion of reinforcement in optimum depth of sand, decreased settlements and leading to an economic design of the footings.References
Adams, M.T. and Collin, J.G. (1997). Large Model Spread Footing Load Tests on Geosynthetic.
Reinforced Soil Foundations, Journal of Geotechnical and Geoenvironmental Engineering,
(1), pp. 66- 72.
Alamshahi, S., & Hataf, N. (2009). Bearing capacity of strip footings on sand slopes reinforced
with geogrid and grid-anchor, Geotextiles and Geomembranes, 27 (3), 217–226.
doi:10.1016/j.geotexmem.2008.11.011.
American Society for Testing and Materials (ASTM D4439-11), (2011). Standard Test Methods
for Standard Terminology for Geosynthetics.
Bathurst, R.J., Nernheim, A.,Walters, D.L., Allen, T.M., Burgess, P., Saunders, D.D. (2009).
Influence of reinforcement stiffness and compaction on the performance of four
geosynthetic-reinforced soil walls, Geosynthetics International 16 (1), 43- 49.
Boushehrian, et.al. (2011). Modeling of the cyclic behavior of shallow foundations resting on
geomesh and grid-anchor reinforced sand, Geotextiles and Geomembranes, 29(3), 242–248.
doi:10.1016/j.geotexmem.2010.11.008.
Boushehrian, A.H. and Hataf, N. (2008). Bearing capacity of ring footings on reinforced clay, in
Proc. 12th. Conf. of Int. Assoc. For Computer Methods and Advances in Geomechanics
(IACMAG), Goa, India, pp. 3546-3551.
Chung, W. and Cascante, G., (2006), Experimental and numerical study of soil-reinforcement
effects on the low-strain stiffness and bearing capacity of shallow foundations, Journal of
Geotechnical and Geological Engineering, Original Paper.
Dash, S. (2003). Model studies on circular footing supported on geocell reinforced sand
underlain by soft clay, Geotextiles and Geomembranes, 21(4), 197–219. doi:10.1016/S0266-
(03)00017-7.
Dash, S. K. et.al . (2001). Strip footing on geocell reinforced sand beds with additional planar
reinforcement. Geotextiles and Geomembranes, 19(8), 529–538. doi:10.1016/S0266-
(01)00022-X.
El Sawwaf, M., & Nazir, A. K. (2012). Cyclic settlement behavior of strip footings resting on
reinforced layered sand slope, Journal of Advanced Research, 3(4), 315–324.
doi:10.1016/j.jare.2011.10.002.
El Sawwaf, M., & Nazir, A. K. (2010). Behavior of repeatedly loaded rectangular footings
resting on reinforced sand, Alexandria Engineering Journal, 49(4), 349–356.
doi:10.1016/j.aej.2010.07.002.
Guido, V.A., Biesiadecki, G.L. and Sullivan, M.J., (1985). Bearing Capacity of a Geotextile
Reinforced Foundation, Proc. 11th Int. Conf. Soil Mech. And Found. Eng., San Francisco,
Calif., pp. 1777- 1780.
Han, J., S. K. Pokharel, X. Yang, C. Manandhar, D. Leshchinsky, I. Halahmi, and R. L. Parsons.
(2011). Performance of geocell-reinforced RAP bases over weak subgrade under fullscale
moving heel loads, ASCE Journal of Materials in Civil Engineering, 23, no.11:1525-1535.
Hataf, N. et. al (2010). Experimental and Numerical Behavior of Shallow Foundations on Sand
Reinforced with Geogrid and Grid Anchor Under Cyclic Loading, 17(1), 1–10.
Hejazi, S. M. et. al(2012). A simple review of soil reinforcement by using natural and synthetic
fibers. Construction and Building Materials, 30, 100–116.
Jones, C.J.F.P., Clarke, D., (2007). The residual strength of geosynthetic reinforcement subjected
to accelerated creep testing and simulated seismic events. Geotextiles and Geomembranes
(3), 155- 169.
Karimpour, H., Lade, P.V. (2010). Time effects relate to crushing in sand, ASCE Journal of
Geotechnical and Geoenvironmental Engineering 136 (9), 1209- 1219.
Khatib, A. (2010). Bearing Capacity Of Granular Soil Overlying Soft Clay Reinforced with
Bamboo-Geotextile Composite at the Interface. PhD. Thesis, Department of Geotechnics and
Transportation, Faculty of Civil Engineering, Universiti Teknologi Malaysia, Johor Bahru.
Kim, J.R., Kang, H., Kim, D., Lee, Y., Hwang, S.W., (2007). Viscoelastic analysis of constant
creep tests on silicate-grouted sands at low stress levels. ASCE Journal of Geotechnical and
Geoenvironmental Engineering 133 (9), 1162- 1166.
Koerner, R. M, (1990). Designing with Geosynthetics. (2nd Edition) Englewood Cliffs, N.J.:
Prentice Hall.
Kongkitkul, W., Tatsuoka, F., Hirakawa, D., Sugimoto, T., Kawahata, S., Ito, M., (2010). Time
histories of tensile force in geogrid arranged in two full-scale high walls. Geosynthetics
International 17 (1), 12- 33.
Kuwano, R., Jardine, R.J., (2002). On measuring creep behaviour in granular materials through
triaxial testing. Canadian Geotechnical Journal 39 (5), 1061- 1074.
Lackner, C., Bergado, D. T., & Semprich, S. (2013). Prestressed reinforced soil by geosynthetics
– Concept and experimental investigations, Geotextiles and Geomembranes, 37, 109–123.
doi:10.1016/j.geotexmem.2013.02.002
Lade, P.V., Nam, J., Liggio Jr., C.D. (2010). Effects of particle crushing in stress droprelaxation
experiments on crushed coral sand, ASCE Journal of Geotechnical and Geoenvironmental
Engineering 136 (3), 500- 509.
Lade, P.V., Liggio Jr., C.D., Nam, J. (2009). Strain rate, creep, and stress drop-creep
experiments on crushed coral sand, ASCE Journal of Geotechnical and Geoenvironmental
Engineering 135 (7), 941- 953.
Leshchinsky, D., Zhu, F., Meehan, C.L. (2010). Required unfactored strength of geosynthetic in
reinforced earth structures, Journal of Geotechnical and Geoenvironmental Engineering,
ASCE 136 (2), 281e289.
Li, F.-L. et.al. (2012). FE simulation of viscous behavior of geogrid-reinforced sand under
laboratory-scale plane-strain-compression testing, Geotextiles and Geomembranes, 31, 72–
doi:10.1016/j.geotexmem.2011.09.005.
Li, A.L., Rowe, R.K., (2001). Influence of creep and stress-relaxation of geosynthetic
reinforcement on embankment behaviour. Geosynthetics International 8 (3), 233- 270.
Ling I, Leshchinsky D, Tatsuoka F. ( 2003). Reinforced soil engineering: advances in research
and practice, Marcel Dekker Inc.
Liu, H.B., Wang, X.Y., Song, E.X. (2009). Long-term behavior of GRS retaining walls with
marginal backfill soils, Geotextiles and Geomembranes 27 (4), 295- 307.
Liu, S.Y., Han, J., Zhang, D.W., Hong, Z.S. (2008). A combined DJM-PVD method for soft
ground improvement, Geosynthetics International 15 (1), 43–54.
Madhavi Latha, G., Amit Somwanshi, S. (2009). Bearing capacity of square footings on
geosynthetic reinforced sand, Geotextiles and Geomembranes 27 (4), 281- 294.
Marto, A., Oghabi, M., Eisazadeh, A. (2013). The Effect of Geogrid Reinforcement on Bearing
Capacity Properties of Soil Under Static Load ; A Review, The Electronic Journal of
Geotechnical Engineering 18 (J), 1881–1898.
Mosallanezhad, M., Hataf, N. and Ghahramani, A. (2008). Experimental Study of Bearing
Capacity of Granular Soils, Reinforced with Innovative Grid-Anchor System, Journal of
geotechnical and geological engineering, Vol. 26(3), pp. 299- 312.
Noorzad, R., MIrmoradi, S.H. (2010). Laboratory evaluation of the behavior of a geotextile
reinforced clay, Geotextile and Geomembranes 28 (4), 386- 392.
Perkins, S.W., (2000). Constitutive modeling of geosynthetics. Geotextiles and Geomembranes
(5), 273- 292.
Pokharel, S. K. et .al. (2010). Investigation of factors influencing behavior of single geocellreinforced
bases under static loading, Geotextiles and Geomembranes, 28(6), 570–578.
doi:10.1016/j.geotexmem.2010.06.002.
Rowe, R.K., Taechakumthorn, C. (2011). Design of reinforced embankments on soft clay
deposits considering the viscosity of both foundation and reinforcement, Geotextiles and
Geomembranes 29 (5), 448e461.
Rowe, R.K., Taechakumthorn, C. (2008). Combined effect of PVDs and reinforcement on
embankments over rate-sensitive soils, Geotextiles and Geomembranes 26 (3), 239–249.
Sawicki, A., (1999). Creep of geosynthetic reinforced soil retaining walls. Geotextiles and
Geomembranes 17 (1), 51e65.
Shinoda, M., Bathurst, R.J., (2004). Lateral and axial deformation of PP, HDPE and PET
geogrids under tensile load. Geotextiles and Geomembranes 22 (4), 205- 222.
Sitharam, T.G, Sireesh, S. (2012). Behavior of Embedded Footings Supported on Geogrid Cell
Reinforced Foundation Beds, 28(5), 1–12.
Tafreshi, S. N., & Dawson, a. R. (2012). A comparison of static and cyclic loading responses of
foundations on geocell-reinforced sand, Geotextiles and Geomembranes, 32, 55–68.
doi:10.1016/j.geotexmem.2011.12.003.
Tg, S., & Sireesh, S. (2012). Behavior of Embedded Footings Supported on Geogrid Cell
Reinforced Foundation Beds, 28(5), 1–12.
Yang, X. et.al. (2012). Accelerated pavement testing of unpaved roads with geocell-reinforced
sand bases, Geotextiles and Geomembranes, 32, 95–103.
doi:10.1016/j.geotexmem.2011.10.004.
Yang, X.M. (2010). Numerical Analyses of Geocell-Reinforced Granular Soils under Static and
Repeated Loads, Ph.D. dissertation, CEAE Department, the University of Kansas.
Yarbasi N, Kalkan E, Akbulut S. (2007). "Modification of freezing–thawing properties of
granular soils with waste additives", Col Reg Sci Technol;48:44–54.
Yeo, S.S., Hsuan, Y.G. (2010). Evaluation of creep behavior of high density polyethylene and
polyethylene-terephthalate geogrids. Geotextiles and Geomembranes 28 (5), 409- 421.
Zhang, L. et.al. (2010a). Bearing capacity of geocell reinforcement in embankment engineering.
Geotextiles and Geomembranes, 28(5), 475–482. doi:10.1016/j.geotexmem.2009.12.011.
Zhang, L. et.al.(2010b). Bearing capacity of geocell reinforcement in embankment engineering.
Geotextiles and Geomembranes, 28(5), 475–482. doi:10.1016/j.geotexmem.2009.12.011.
Zidan, a. F. (2012). Numerical Study of Behavior of Circular Footing on Geogrid-Reinforced
Sand Under Static and Dynamic Loading. Geotechnical and Geological Engineering, 30(2),
–510. doi:10.1007/s10706-011-9483-0