A COMPREHENSIVE REVIEW OF SCANNING PATTERNS IN DIRECT LASER METAL DEPOSITION FOR OPTIMIZING PROCESS AND PART QUALITY
DOI:
https://doi.org/10.11113/aej.v16.23987Keywords:
Directed Energy Deposition, Direct Laser Metal Deposition, Additive Manufacturing, Scanning Paths, Scanning PatternsAbstract
Directed Energy Deposition (DED) has emerged as a transformative technology in additive manufacturing, enabling the efficient repair of high-cost metal parts and the creation of complex, customized components. This paper critically reviews the influence of scanning patterns in powder-based laser DED on part quality, focusing on how different patterns develop common defects such as cracks, porosity, distortion, and residual stresses. By synthesizing past research, this review reveals the impact of scanning patterns on key factors, including surface texture, substrate deformation, microstructure, and the anisotropy of mechanical properties. A comparative analysis of different shaped scanning paths highlights their respective advantages and limitations in achieving optimal part performance. While established patterns like raster and S-shaped paths show promising improvements in dimensional accuracy and surface finish, issues such as poor fusion, porosity, and uneven heat distribution persist. The review concludes that while carefully applying current scanning patterns can enhance part quality, further optimization is essential to reduce defects and improve fusion and residual stress management. Future research should focus on refining conventional scanning patterns or the development and application of innovative deposition patterns to maximize the potential of laser-based DED.
References
Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D. 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering 143:172–96. DOI: https://doi.org/10.1016/j.compositesb.2018.02.012.
Dilberoglu UM, Gharehpapagh B, Yaman U, Dolen M. 2017. The role of additive manufacturing in the era of Industry 4.0. Procedia Manufacturing 11: 545–54. DOI: https://doi.org/10.1016/j.promfg.2017.07.148.
Bigliardi B, Bottani E, Gianatti E, Monferdini L, Pini B, Petroni A. 2024. Sustainable additive manufacturing in the context of Industry 4.0: A literature review. Procedia Computer Science 232: 766–74. DOI: https://doi.org/10.1016/j.procs.2024.01.076.
Tshephe TS, Akinwamide SO, Olevsky E, Olubambi PA. 2022. Additive manufacturing of titanium-based alloys: A review of methods, properties, challenges, and prospects. Heliyon 8: e09041. DOI: https://doi.org/10.1016/j.heliyon.2022.e09041.
Pant H, Arora A, Gopakumar GS, Chadha U, Saeidi A, Patterson AE. 2023. Applications of wire arc additive manufacturing (WAAM) for aerospace component manufacturing. International Journal of Advanced Manufacturing Technology 127:4995–5011. DOI: https://doi.org/10.1007/s00170-023-11623-7.
Ahn D-G. 2021. Directed energy deposition (DED) process: State of the art. International Journal of Precision Engineering and Manufacturing-Green Technology 8:703–42. DOI: https://doi.org/10.1007/s40684-020-00302-7.
ISO/ASTM 52900. 2021. Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM 52900:2021(en). Available from: https://www.iso.org/obp/ui/#iso:std:iso-astm:52900:ed-2:v1:en:term:3.3.7 (accessed May 30, 2023).
Giacosa E, Crocco E, Kubálek J, Culasso F. 2024. Additive manufacturing in international business: Bridging academic and practitioners’ perspectives. Journal of International Management 30: 101151. DOI: https://doi.org/10.1016/j.intman.2024.101151.
Despeisse M, Hajali T, Hryha E. 2024. Sustainability in additive manufacturing. In: Abraham MA, editor. Encyclopedia of Sustainable Technologies (Second Edition). Oxford: Elsevier. p. 533–47. DOI: https://doi.org/10.1016/B978-0-323-90386-8.00123-6.
Bhatia A, Sehgal AK. 2023. Additive manufacturing materials, methods and applications: A review. Materials Today: Proceedings 81: 1060–7. DOI: https://doi.org/10.1016/j.matpr.2021.04.379.
Tavares TM, Ganga GMD, Godinho Filho M, Rodrigues VP. 2023. The benefits and barriers of additive manufacturing for circular economy: A framework proposal. Sustainable Production and Consumption 37: 369–88. DOI: https://doi.org/10.1016/j.spc.2023.03.006.
Lacroix R, Seifert RW, Timonina-Farkas A. 2021. Benefiting from additive manufacturing for mass customization across the product life cycle. Operations Research Perspectives 8: 100201. DOI: https://doi.org/10.1016/j.orp.2021.100201.
Scott C. 2023. Wohlers report 2023 unveils continued double-digit growth. Wohlers Associates. Available from: https://wohlersassociates.com/news/wohlers-report-2023-unveils-continued-double-digit-growth/ (accessed October 3, 2023).
Additive Manufacturing Research. 2017. Ceramics additive manufacturing markets 2017–2028. Available from: https://additivemanufacturingresearch.com/reports/ceramics-additive-manufacturing-markets-2017-2028/ (accessed October 3, 2023).
ReportLinker. 2023. Additive manufacturing global market report 2023. Available from: https://www.reportlinker.com/p06464095/Additive-Manufacturing-Global-Market-Report.html (accessed October 29, 2023).
Aniwaa. 2023. Metal 3D printers in 2023: A comprehensive guide. Available from: https://www.aniwaa.com/buyers-guide/3d-printers/best-metal-3d-printer/ (accessed October 3, 2023).
AMPOWER. 2020. Overall additive manufacturing market valued at EUR 7.18 billion in 2020. AMPOWER report on additive manufacturing. Available from: https://additive-manufacturing-report.com/additive-manufacturing-market-2022/ (accessed October 3, 2023).
Additive Manufacturing Research. 2023. Opportunities for directed energy deposition to reach almost $755 million by 2025. Available from:https://additivemanufacturingresearch.com/news/opportunities-for-directed-energy-deposition-to-reach-almost-755-million-by-2025/ (accessed October 4, 2023).
B.a P, N L, Buradi A, N S, B l P, R V. 2022. A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential. Materials Today: Proceedings 52: 1309–13. DOI: https://doi.org/10.1016/j.matpr.2021.11.059.
Brueckner F, Riede M, Müller M, Marquardt F, Willner R, Seidel A, et al. 2018. Enhanced manufacturing possibilities using multi-materials in laser metal deposition. Journal of Laser Applications 30: 032308. DOI: https://doi.org/10.2351/1.5040639.
Brueckner F, Schab JC, Marquardt F, Mueller M, Riede M, Seidel A, et al. 2019. Phenomena in multi-material fabrication using laser metal deposition. In: Helvajian H, Gu B, Chen H, editors. Laser 3D Manufacturing VI. San Francisco, United States: SPIE. 16. DOI: https://doi.org/10.1117/12.2513570.
Zhang X, Pan T, Flood A, Chen Y, Zhang Y, Liou F. 2021. Investigation of copper/stainless steel multi-metallic materials fabricated by laser metal deposition. Materials Science and Engineering: A 811: 141071. DOI: https://doi.org/10.1016/j.msea.2021.141071.
Mehrabi O, Seyedkashi SMH, Moradi M. 2023. Functionally graded additive manufacturing of thin-walled 316L stainless steel-Inconel 625 by direct laser metal deposition process: Characterization and evaluation. Metals 13: 1108. DOI: https://doi.org/10.3390/met13061108.
Armstrong M, Mehrabi H, Naveed N. 2022. An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes 84: 1001–29. DOI: https://doi.org/10.1016/j.jmapro.2022.10.060.
Svetlizky D, Das M, Zheng B, Vyatskikh AL, Bose S, Bandyopadhyay A, et al. 2021. Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today 49: 271–95. DOI: https://doi.org/10.1016/j.mattod.2021.03.020.
Dass A, Moridi A. 2019. State of the art in directed energy deposition: From additive manufacturing to materials design. Coatings 9: 418. DOI: https://doi.org/10.3390/coatings9070418.
Oh WJ, Son Y, Son JY, Shin GW, Shim DS. 2020. Effect of groove shapes on mechanical properties of STS316L repaired by direct energy deposition. Transactions of Materials Processing 29: 103–12. DOI: https://doi.org/10.5228/KSTP.2020.29.2.103.
Dev Singh D, Arjula S, Raji Reddy A. 2021. Functionally graded materials manufactured by direct energy deposition: A review. Materials Today: Proceedings 47: 2450–6. DOI: https://doi.org/10.1016/j.matpr.2021.04.536.
Zhang J-C, Cao Y-P, Wang H, Shi T, Su B-Y, Hua G-R. 2023. Annular laser metal deposition of Ti-6Al-4V alloy in a semi-open environment: Process optimization, microstructure and mechanical properties. Optik 286:171014. DOI: https://doi.org/10.1016/j.ijleo.2023.171014.
Tang Z, Wei Q, Gao Z, Yang H, Wang A, Wan L, et al. 2023. 2000W blue laser directed energy deposition of AlSi7Mg: Process parameters, molten pool characteristics, and appearance defects. Virtual and Physical Prototyping 18: e2120405. DOI: https://doi.org/10.1080/17452759.2022.2120405.
Sarma R, Singh AK, Kapil S, Bag S, Joshi SN. 2023. Evolution of near homogenous mechanical and microstructural properties in wire-arc based directed energy deposition of low carbon steel following trochoidal trajectory toolpath. Journal of Materials Processing Technology 315: 117921. DOI: https://doi.org/10.1016/j.jmatprotec.2023.117921.
Roucou D, Corre T, Rolland G, Lazarus V. 2023. Effect of the deposition direction on fracture propagation in a duplex stainless steel manufactured by directed energy deposition. Materials Science and Engineering: A 878: 145176. DOI: https://doi.org/10.1016/j.msea.2023.145176.
Mehrabi O, Hossein Seyedkashi SM, Moradi M. 2023. Experimental and response surface study on additive manufacturing of functionally graded steel-Inconel wall using direct laser metal deposition. Optics & Laser Technology 167: 109707. DOI: https://doi.org/10.1016/j.optlastec.2023.109707.
Liu Y, Jiang W, Chen Z, Xu Q, Zhang Z, He J. 2023. Optimization of processing parameters and microstructure evolution of (TiB+La2O3)/Ti6Al4V manufactured by laser melting deposition. Journal of Materials Research and Technology 24: 8086–97. DOI: https://doi.org/10.1016/j.jmrt.2023.05.058.
Liu Y, Wang F, Xu D, Wang J, Jiang F, Zarinejad M, et al. 2023. Microstructure and mechanical properties of laser metal deposited Ti6Al4V alloy with near equiaxed β grain structure. Journal of Materials Research and Technology 22: 1935–47. DOI: https://doi.org/10.1016/j.jmrt.2022.12.068.
Aydin G, Valiente Bermejo MA, Högström M, Şelte A, Oikonomou C, Andersson J. 2023. Influence of laser metal deposition process parameters on a precipitation hardening stainless steel. Welding in the World 67:1067–80. DOI: https://doi.org/10.1007/s40194-023-01478-7.
Shim D. 2021. Effects of process parameters on additive manufacturing of aluminum porous materials and their optimization using response surface method. Journal of Materials Research and Technology 15: 119–34. DOI: https://doi.org/10.1016/j.jmrt.2021.08.010.
Moradi M, Hasani A, Pourmand Z, Lawrence J. 2021. Direct laser metal deposition additive manufacturing of Inconel 718 superalloy: Statistical modelling and optimization by design of experiments. Optics & Laser Technology 144: 107380. DOI: https://doi.org/10.1016/j.optlastec.2021.107380.
Liu Y, Wang L, Brandt M. 2021. An accurate and real-time melt pool dimension measurement method for laser direct metal deposition. International Journal of Advanced Manufacturing Technology 114: 2421–32. DOI: https://doi.org/10.1007/s00170-021-06911-z.
Manikandan N, Raju R, Palanisamy D, Arulkirubakaran, Kumar S. 2018. Investigation on Ti6Al4V laser metal deposition using Taguchi based grey approach. Materials Today: Proceedings 5: 14375–83. DOI: https://doi.org/10.1016/j.matpr.2018.03.022.
Mahamood RM, Akinlabi ET. 2018. Effect of Powder Flow Rate on Surface Finish in Laser Additive Manufacturing Process. IOP Conference Series: Materials Science and Engineering 391: 012005. DOI: https://doi.org/10.1088/1757-899X/391/1/012005.
Mazzarisi M, Angelastro A, Latte M, Colucci T, Palano F, Campanelli SL. 2023. Thermal monitoring of laser metal deposition strategies using infrared thermography. Journal of Manufacturing Processes 85: 594–611. DOI: https://doi.org/10.1016/j.jmapro.2022.11.067.
Su Y, Wang Z, Lu H, Luo K, Lu J. 2022. Improved wear resistance of directed energy deposited Fe-Ni-Cr alloy via closed-loop controlling laser power. Journal of Manufacturing Processes 75:802–13. DOI: https://doi.org/10.1016/j.jmapro.2022.01.047.
Saboori A, Aversa A, Marchese G, Biamino S, Lombardi M, Fino P. 2019. Application of Directed Energy Deposition-Based Additive Manufacturing in Repair. Applied Sciences 9:3316. DOI: https://doi.org/10.3390/app9163316.
Ghasempour-Mouziraji M, Lagarinhos J, Afonso D, Alves De Sousa R. 2024. A review study on metal powder materials and processing parameters in Laser Metal Deposition. Optics & Laser Technology 170:110226. DOI: https://doi.org/10.1016/j.optlastec.2023.110226.
Katsarelis C, Chen P, Gradl P, Protz C, Jones Z, Ellis D, et al. n.d. Additive Manufacturing of NASA HR-1 Material for Liquid Rocket Engine Component Applications.
Parupelli SK, Desai S. 2019. A Comprehensive Review of Additive Manufacturing (3D Printing): Processes, Applications and Future Potential. American Journal of Applied Sciences 16:244–72. DOI: https://doi.org/10.3844/ajassp.2019.244.272.
Blakey-Milner B, Gradl P, Snedden G, Brooks M, Pitot J, Lopez E, et al. 2021. Metal additive manufacturing in aerospace: A review. Materials & Design 209:110008. DOI: https://doi.org/10.1016/j.matdes.2021.110008.
Wang S, Wang Z, Yang K, Chen M, Wu E, Ni Z, et al. 2022. Investigation of on-site repair of 18Ni300 by underwater laser direct metal deposition technique. Journal of Manufacturing Processes 80: 909–19. DOI: https://doi.org/10.1016/j.jmapro.2022.06.039.
Ahn D-G. 2011. Applications of laser assisted metal rapid tooling process to manufacture of molding & forming tools — state of the art. International Journal of Precision Engineering and Manufacturing 12: 925–38. DOI: https://doi.org/10.1007/s12541-011-0125-5.
John Solomon I, Sevvel P, Gunasekaran J, Tanushkumaar P. 2022. A review on additive manufacturing of alloys using laser metal deposition. Materials Today: Proceedings 64:44–50. DOI: https://doi.org/10.1016/j.matpr.2022.03.510.
Onuike B, Bandyopadhyay A. 2019. Additive manufacturing in repair: Influence of processing parameters on properties of Inconel 718. Materials Letters 252: 256–9. DOI: https://doi.org/10.1016/j.matlet.2019.05.114.
Li W, Yan L, Karnati S, Liou F, Newkirk J, Taminger KMB, et al. 2017. Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by Laser Metal Deposition. Journal of Materials Processing Technology 242: 39–48. DOI: https://doi.org/10.1016/j.jmatprotec.2016.11.010.
Xi X, Chen B, Tan C, Song X, Feng J. 2020. Microstructure and mechanical properties of SiC reinforced AlSi10Mg composites fabricated by laser metal deposition. Journal of Manufacturing Processes 58:763–74. DOI: https://doi.org/10.1016/j.jmapro.2020.08.073.
Pratheesh Kumar S, Anand K, Hari Chealvan S, Karthikeya Muthu S. 2022. Review on surface characteristics of components produced by direct metal deposition process. Journal of Mechanical Engineering and Sciences 16: 9197–229. DOI: https://doi.org/10.15282/jmes.16.4.2022.05.0729.
Liu M, Kumar A, Bukkapatnam S, Kuttolamadom M. 2021. A Review of the Anomalies in Directed Energy Deposition (DED) Processes & Potential Solutions - Part Quality & Defects. Procedia Manufacturing 53: 507–18. DOI: https://doi.org/10.1016/j.promfg.2021.06.093.
Bi J, Wu L, Li S, Yang Z, Jia X, Starostenkov MD, et al. 2023. Beam shaping technology and its application in metal laser additive manufacturing: A review. Journal of Materials Research and Technology 26:4606–28. DOI: https://doi.org/10.1016/j.jmrt.2023.08.037.
Piscopo G, Iuliano L. 2022. Current research and industrial application of laser powder directed energy deposition. International Journal of Advanced Manufacturing Technology 119:6893–917. DOI: https://doi.org/10.1007/s00170-021-08596-w.
Piscopo G, Atzeni E, Saboori A, Salmi A. 2022. An Overview of the Process Mechanisms in the Laser Powder Directed Energy Deposition. Applied Sciences 13: 117. DOI: https://doi.org/10.3390/app13010117.
Moradi M, Pourmand Z, Hasani A, Karami Moghadam M, Sakhaei AH, Shafiee M, et al. 2022. Direct laser metal deposition (DLMD) additive manufacturing (AM) of Inconel 718 superalloy: Elemental, microstructural and physical properties evaluation. Optik 259: 169018. DOI: https://doi.org/10.1016/j.ijleo.2022.169018.
Pratheesh Kumar S, Elangovan S, Mohanraj R, Ramakrishna JR. 2021. A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition. Materials Today: Proceedings 46:7892–906. DOI: https://doi.org/10.1016/j.matpr.2021.02.566.
Izadi M, Farzaneh A, Mohammed M, Gibson I, Rolfe B. 2020. A review of laser engineered net shaping (LENS) build and process parameters of metallic parts. Rapid Prototyping Journal 26:1059–78. DOI: https://doi.org/10.1108/RPJ-04-2018-0088.
Camargo ILD, Lovo JFP, Erbereli R, Coelho RT, Silva IBD, Fortulan CA. 2020. An Overview of Laser Engineered Net Shaping of Ceramics. Matéria (Rio de Janeiro) 25:e-12590. DOI: https://doi.org/10.1590/s1517-707620200001.0916.
Azarniya A, Colera XG, Mirzaali MJ, Sovizi S, Bartolomeu F, St Weglowski MK, et al. 2019. Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties. Journal of Alloys and Compounds 804:163–91. DOI: https://doi.org/10.1016/j.jallcom.2019.04.255.
Arackal Narayanan J, Paul C, Bindra K. 2019. Laser-assisted directed energy deposition of nickel super alloys: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233: 146442071985265. DOI: https://doi.org/10.1177/1464420719852658.
Thompson SM, Bian L, Shamsaei N, Yadollahi A. 2015. An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics. Additive Manufacturing 8: 36–62. DOI: https://doi.org/10.1016/j.addma.2015.07.001.
Shamsaei N, Yadollahi A, Bian L, Thompson SM. 2015. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control. Additive Manufacturing 8: 12–35. DOI: https://doi.org/10.1016/j.addma.2015.07.002.
Cai Y, Xiong J, Chen H, Zhang G. 2023. A review of in-situ monitoring and process control system in metal-based laser additive manufacturing. Journal of Manufacturing Systems 70:309–26. DOI: https://doi.org/10.1016/j.jmsy.2023.07.018.
Liu W-W, Saleheen KM, Tang Z, Wang H, Al-Hammadi G, Abdelrahman A, et al. 2021. Review on scanning pattern evaluation in laser-based additive manufacturing. Optical Engineering 60:070901. DOI: : https://doi.org/10.1117/1.OE.60.7.070901.
Jiang J, Ma Y. 2020. Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review. Micromachines 11: 633. DOI: https://doi.org/10.3390/mi11070633.
Yu J, Rombouts M, Maes G, Motmans F. 2012. Material Properties of Ti6Al4V Parts Produced by Laser Metal Deposition. Physics Procedia 39:416–24. DOI: https://doi.org/10.1016/j.phpro.2012.10.056.
Mobarak MH, Islam MdA, Hossain N, Al Mahmud MdZ, Rayhan MdT, Nishi NJ, et al. 2023. Recent advances of additive manufacturing in implant fabrication – A review. Applied Surface Science Advances 18: 100462. DOI: https://doi.org/10.1016/j.apsadv.2023.100462.
Katsarelis C, Chen P, Gradl P, Protz C, Jones Z, Ellis D, et al. 2019. Additive Manufacturing of NASA HR-1 Material for Liquid Rocket Engine Component Applications. Tampa, FL.
NASA T. 2021. NASA Advances New Alloys and Scale of Metal Additive Manufacturing. 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing. Available from: https://3dprint.com/278670/nasa-advances-new-alloys-and-scale-of-metal-additive-manufacturing/ (accessed July 25, 2023).
Optomec. 2016. TopTen-Additive-Manufacturing-Apps. Product Development of Func3onal Metal Parts. Available from: https://www.optomec.com/wp-content/uploads/2016/04/TopTen-Additive-Manufacturing-Apps.pdf (accessed October 4, 2023).
Yadollahi A, Mahtabi MJ, Khalili A, Doude HR, Newman Jr JC. 2018. Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape. Fatigue & Fracture of Engineering Materials & Structures 41:1602–14. DOI: https://doi.org/10.1111/ffe.12799.
Mahamood RM, Akinlabi ET, Owolabi MG. 2017. Effect of laser power and powder flow rate on dilution rate and surface finish produced during laser metal deposition of Titanium alloy. Proceedings of the 8th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT): 6–10. DOI: https://doi.org/10.1109/ICMIMT.2017.7917405.
Moradi M, Ashoori A, Hasani A. 2020. Additive manufacturing of stellite 6 superalloy by direct laser metal deposition – Part 1: Effects of laser power and focal plane position. Optics & Laser Technology 131: 106328. DOI: https://doi.org/10.1016/j.optlastec.2020.106328.
Lee H, Lim CHJ, Low MJ, Tham N, Murukeshan VM, Kim Y-J. 2017. Lasers in additive manufacturing: A review. International Journal of Precision Engineering and Manufacturing - Green Technology, 4(3): 307-322. DOI: https://doi.org/10.1007/s40684-017-0037-7.
Wirth F. 2018. Process Understanding, Modeling and Predictive Simulation of Laser Cladding. ETH Zurich. DOI: https://doi.org/10.3929/ETHZ-B-000314396.
Lia F, Park J, Tressler J, Martukanitz R. 2017. Partitioning of laser energy during directed energy deposition. Additive Manufacturing 18: 31–9. DOI: https://doi.org/10.1016/j.addma.2017.08.012.
Bremer SJL, Luckabauer M, Römer GRBE. 2023. Laser intensity profile as a means to steer microstructure of deposited tracks in Directed Energy Deposition. Materials & Design 227: 111725. DOI: https://doi.org/10.1016/j.matdes.2023.111725.
Pelaprat J-M. n.d. Blue laser additive manufacturing. Aerospace Manufacturing and Design. Available from: https://www.aerospacemanufacturinganddesign.com/article/blue-laser-additive-manufacturing (accessed October 10, 2023).
Liu X, Wang H, Kaufmann K, Vecchio K. 2023. Directed energy deposition of pure copper using blue laser. Journal of Manufacturing Processes 85: 314–22. DOI: https://doi.org/10.1016/j.jmapro.2022.11.064.
Mahamood RM. 2018. Processing Parameters in Laser Metal Deposition Process. Laser Metal Deposition Process of Metals, Alloys, and Composite Materials. Cham: Springer International Publishing. 61–92. DOI: https://doi.org/10.1007/978-3-319-64985-6_4.
Moghimian P, Poirié T, Habibnejad-Korayem M, Zavala JA, Kroeger J, Marion F, et al. 2021. Metal powders in additive manufacturing: A review on reusability and recyclability of common titanium, nickel and aluminum alloys. Additive Manufacturing 43: 102017. DOI: https://doi.org/10.1016/j.addma.2021.102017.
Cordova L, Campos M, Tinga T. 2019. Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization. The Journal of The Minerals, Metals & Materials Society 71: 1062–72. DOI: https://doi.org/10.1007/s11837-018-3305-2.
Pinkerton AJ, Li L. 2005. Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them. Applied Surface Science 247: 175–81. DOI: https://doi.org/10.1016/j.apsusc.2005.01.083.
Ahsan MN, Pinkerton AJ, Moat RJ, Shackleton J. 2011. A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders. Materials Science and Engineering A 528:7648–57. DOI: https://doi.org/10.1016/j.msea.2011.06.074.
Zhong C, Chen J, Linnenbrink S, Gasser A, Sui S, Poprawe R. 2016. A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder. Materials & Design 107: 386–92. DOI: https://doi.org/10.1016/j.matdes.2016.06.037.
Arrizubieta JI, Martínez S, Lamikiz A, Ukar E, Arntz K, Klocke F. 2017. Instantaneous powder flux regulation system for Laser Metal Deposition. Journal of Manufacturing Processes 29: 242–51. DOI: https://doi.org/10.1016/j.jmapro.2017.07.018.
Xu G, Lu P, Li M, Liang C, Xu P, Liu D, et al. 2018. Investigation on characterization of powder flowability using different testing methods. Experimental Thermal and Fluid Science 92: 390–401. DOI: https://doi.org/10.1016/j.expthermflusci.2017.11.008.
Li W, Karnati S, Zhang Y, Liou F. 2018. Investigating and eliminating powder separation in pre-mixed powder supply for laser metal deposition process. Journal of Materials Processing Technology 254: 294–301.DOI: https://doi.org/10.1016/j.jmatprotec.2017.11.045.
Nagulin KYu, Iskhakov FR, Shpilev AI, Gilmutdinov AKh. 2018. Optical diagnostics and optimization of the gas-powder flow in the nozzles for laser cladding. Optics & Laser Technology 108: 310–20. DOI: https://doi.org/10.1016/j.optlastec.2018.07.001.
Cortina M, Arrizubieta JI, Ruiz JE, Lamikiz A, Ukar E. 2018. Design and Manufacturing of a Protective Nozzle for Highly Reactive Materials Processing via Laser Material Deposition. Procedia CIRP 68: 387–92. DOI: https://doi.org/10.1016/j.procir.2017.12.100.
Wen P, Qin Y, Chen Y, Voshage M, Jauer L, Poprawe R, et al. 2019. Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification. Journal of Materials Science & Technology 35:368–76. DOI: https://doi.org/10.1016/j.jmst.2018.09.065.
Ruiz J, Cortina M, Arrizubieta J, Lamikiz A. 2018. Study of the Influence of Shielding Gases on Laser Metal Deposition of Inconel 718 Superalloy. Materials 11: 1388. DOI: https://doi.org/10.3390/ma11081388.
Sun J, Zhao Y, Yang L, Zhao X, Qu W, Yu T. 2019. Effect of shielding gas flow rate on cladding quality of direct laser fabrication AISI 316L stainless steel. Journal of Manufacturing Processes 48: 51–65. DOI: https://doi.org/10.1016/j.jmapro.2019.10.011.
Shim D-S, Baek G-Y, Lee E-M. 2017. Effect of substrate preheating by induction heater on direct energy deposition of AISI M4 powder. Materials Science and Engineering: A 682: 550–62. DOI: https://doi.org/10.1016/j.msea.2016.11.029.
Zhang K, Wang S, Liu W, Long R. 2014. Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping. Applied Surface Science 317:839–55. DOI: https://doi.org/10.1016/j.apsusc.2014.08.113.
Zhang J, Shi S, Fu G, Shi J, Zhu G, Cheng D. 2019. Analysis on surface finish of thin-wall parts by laser metal deposition with annular beam. Optics & Laser Technology 119: 105605. DOI: https://doi.org/10.1016/j.optlastec.2019.105605.
Shim D-S, Baek G-Y, Seo J-S, Shin G-Y, Kim K-P, Lee K-Y. 2016. Effect of layer thickness setting on deposition characteristics in direct energy deposition (DED) process. Optics & Laser Technology 86: 69–78. DOI: https://doi.org/10.1016/j.optlastec.2016.07.001.
Choi YR, Sun SD, Liu Q, Brandt M, Qian M. 2020. Influence of deposition strategy on the microstructure and fatigue properties of laser metal deposited Ti-6Al-4V powder on Ti-6Al-4V substrate. International Journal of Fatigue 130: 105236. DOI: https://doi.org/10.1016/j.ijfatigue.2019.105236.
Zhang Y, Jing H, Xu L, Han Y, Zhao L. 2021. Effects of different scanning patterns on nickel alloy-directed energy deposition based on thermal analysis. Virtual and Physical Prototyping 16:S98–115. DOI: https://doi.org/10.1080/17452759.2021.1896173.
Nickel AH, Barnett DM, Prinz FB. 2001. Thermal stresses and deposition patterns in layered manufacturing. Materials Science and Engineering: A 317: 59–64. DOI: https://doi.org/10.1016/S0921-5093(01)01179-0.
Ri-sheng L, Shao-ni S, Zi-sheng L. 2016. The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping. Engineering Failure Analysis 59: 269–78. DOI: https://doi.org/10.1016/j.engfailanal.2015.10.011.
Tan Zhi’En E, Pang JHL, Kaminski J. 2021. Directed energy deposition build process control effects on microstructure and tensile failure behaviour. Journal of Materials Processing Technology 294:117139. DOI: https://doi.org/10.1016/j.jmatprotec.2021.117139.
Gao M, Wang Z, Li X, Zeng X. 2013. The Effect of Deposition Patterns on the Deformation of Substrates During Direct Laser Fabrication. Journal of Engineering Materials and Technology 135:034502. DOI: https://doi.org/10.1115/1.4024195.
Lee Y, Bandari Y, Nandwana P, Gibson BT, Richardson B, Simunovic S. 2019. Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire. Applied Sciences 9:5115. DOI: https://doi.org/10.3390/app9235115.
Lu X, Cervera M, Chiumenti M, Li J, Ji X, Zhang G, et al. 2020. Modeling of the Effect of the Building Strategy on the Thermomechanical Response of Ti-6Al-4V Rectangular Parts Manufactured by Laser Directed Energy Deposition. Metals 10:1643. DOI: https://doi.org/10.3390/met10121643.
Bhardwaj T, Shukla M. 2018. Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel. Materials Science and Engineering: A 734:102–9. DOI: https://doi.org/10.1016/j.msea.2018.07.089.
Ren K, Chew Y, Fuh JYH, Zhang YF, Bi GJ. 2019. Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes. Materials & Design 162:80–93. DOI: https://doi.org/10.1016/j.matdes.2018.11.014.
Saboori A, Piscopo G, Lai M, Salmi A, Biamino S. 2020. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition. Materials Science and Engineering: A 780:139179. DOI: https://doi.org/10.1016/j.msea.2020.139179.
Aversa A, Piscopo G, Salmi A, Lombardi M. 2020. Effect of Heat Treatments on Residual Stress and Properties of AISI 316L Steel Processed by Directed Energy Deposition. Journal of Materials Engineering and Performance 29: 6002–13. DOI: https://doi.org/10.1007/s11665-020-05061-9.
Zhao X, Dong S, Yan S, Liu X, Liu Y, Xia D, et al. 2020. The effect of different scanning strategies on microstructural evolution to 24CrNiMo alloy steel during direct laser deposition. Materials Science and Engineering: A 771:138557. DOI: https://doi.org/10.1016/j.msea.2019.138557.
Li P, Zhou J, Gong Y, Meng X, Lu J. 2021. Effect of post-heat treatment on the microstructure and mechanical properties of laser metal deposition Inconel 718. Journal of Mechanical Science and Technology 35: 2871–8. DOI: https://doi.org/10.1007/s12206-021-0610-4.
Tiwari Y, Mukherjee M, Chatterjee D, Manivannan R. 2023. Influence of inter-layer rotation in parallel deposition strategies on the microstructure, texture, and mechanical behaviour of Inconel-625 during directed energy deposition. Materials Characterization 197: 112711. DOI: https://doi.org/10.1016/j.matchar.2023.112711.
Kim H, Lee K-K, Ahn D-G, Lee H. 2021. Effects of Deposition Strategy and Preheating Temperature on Thermo-Mechanical Characteristics of Inconel 718 Super-Alloy Deposited on AISI 1045 Substrate Using a DED Process. Materials 14:1794. DOI: https://doi.org/10.3390/ma14071794.
Tang D, He X, Wu B, Dang L, Xin H, Li Y. 2023. Anisotropic fatigue performance of directed energy deposited Ti-6Al-4V: Effects of build orientation. Materials Science and Engineering: A 876:145112. DOI: https://doi.org/10.1016/j.msea.2023.145112.
Ren K, Chew Y, Zhang YF, Bi GJ, Fuh JYH. 2019. Thermal analyses for optimal scanning pattern evaluation in laser aided additive manufacturing. Journal of Materials Processing Technology 271:178–88. DOI: https://doi.org/10.1016/j.jmatprotec.2019.03.029.
Ribeiro KSB, Mariani FE, Coelho RT. 2020. A Study of Different Deposition Strategies in Direct Energy Deposition (DED) Processes. Procedia Manufacturing 48: 663–70. DOI: https://doi.org/10.1016/j.promfg.2020.05.158.
Sun L, Ren X, He J, Zhang Z. 2021. Numerical investigation of a novel pattern for reducing residual stress in metal additive manufacturing. Journal of Materials Science & Technology 67: 11–22. DOI: https://doi.org/10.1016/j.jmst.2020.05.080.
Sun L, Ren X, He J, Zhang Z. 2021. A bead sequence-driven deposition pattern evaluation criterion for lowering residual stresses in additive manufacturing. Additive Manufacturing 48: 102424. DOI: https://doi.org/10.1016/j.addma.2020.101619.
Ghasempour M, Afonso D, Torcato R. 2021. Numerical investigation of deposition strategies on the residual stress and geometrical deviation in Laser Metal Deposition. IOP Conference Series: Materials Science and Engineering 1193:012095. DOI: https://doi.org/10.1088/1757-899X/1193/1/012095.
Yu J, Lin X, Ma L, Wang J, Fu X, Chen J, et al. 2011. Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF). Materials Science and Engineering: A 528: 1094–104. DOI: https://doi.org/10.1016/j.msea.2010.09.078.
Yan H, Shen L, Wang X, Tian Z, Xu G, Xie D, et al. 2018. Stress and deformation evaluation of the subarea scanning effect in direct laser-deposited Ti-6Al-4V. International Journal of Advanced Manufacturing Technology 97:915–26. DOI: https://doi.org/10.1007/s00170-018-1983-0. Woo W, Kim D-K, Kingston EJ, Luzin V, Salvemini F, Hill MR. 2019. Effect of interlayers and scanning strategies on through-thickness residual stress distributions in additive manufactured ferritic-austenitic steel structure. Materials Science and Engineering: A 744:618–29. DOI: https://doi.org/10.1016/j.msea.2018.12.078.
Wang J, Zhang J, Liu G, Liang L, Yang G, Huang A, et al. 2022. Effects of scanning strategies on residual stress and deformation by high-power direct energy deposition: Island size and laser jump strategy between islands. Journal of Manufacturing Processes 75:23–40. DOI: https://doi.org/10.1016/j.jmapro.2021.12.054.
Qiu C, Ravi GA, Attallah MM. 2015. Microstructural control during direct laser deposition of a β-titanium alloy. Materials & Design 81:21–30. DOI: https://doi.org/10.1016/j.matdes.2015.05.031.
Paudel BJ, Marshall GJ, Thompson SM. 2022. Thermal Monitoring and Modeling of Ti–6Al–4V Thin Wall Temperature Distribution During Blown Powder Laser Directed Energy Deposition. Journal of Manufacturing Science and Engineering 144: 041007. DOI: https://doi.org/10.1115/1.4052285.
Mirkoohi E, Ning J, Bocchini P, Fergani O, Chiang K-N, Liang SY. 2018. Thermal Modeling of Temperature Distribution in Metal Additive Manufacturing Considering Effects of Build Layers, Latent Heat, and Temperature-Sensitivity of Material Properties. Journal of Manufacturing and Materials Processing 2:63. DOI: https://doi.org/10.3390/jmmp2030063.
Maleki E, Bagherifard S, Bandini M, Guagliano M. 2021. Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities. Additive Manufacturing 37:101619. DOI: https://doi.org/10.1016/j.addma.2020.101619.
