REVIEW ON ADVANCEMENTS IN LITHIUM TITANATE OXIDE CELLS: ENHANCING ENERGY DENSITY AND CYCLE LIFE
DOI:
https://doi.org/10.11113/aej.v16.24093Keywords:
: Lithium Titanate Oxide (LTO), Energy density, Cycle life, Thermal stability, Fast charging, Electric vehicles (EVs), Grid energy storage, High-voltage cathodes, Battery safety, Sustainable energy storageAbstract
Lithium Titanate Oxide (LTO) cells have emerged as a promising solution in energy storage due to their outstanding safety, long cycle life, and ability to deliver high power output. With a stable spinel-structured Li₄Ti₅O₁₂ anode, LTO cells exhibit excellent thermal stability, significantly lowering the risk of thermal runaway, making them ideal for electric vehicles (EVs), grid energy storage, and fast-charging applications. Their ability to endure more than 10,000 charge-discharge cycles with minimal degradation positions them as a viable option for long-term energy storage solutions. Moreover, their consistent performance over a broad temperature range further underscores their versatility. However, the relatively low energy density of LTO cells, when compared to conventional lithium-ion batteries, remains a key limitation, particularly in applications where high energy storage per unit weight is essential. To address this, recent research has focused on increasing energy density through innovations such as high-voltage cathodes, anode modifications, and hybrid cell configurations. Concurrently, efforts to extend the already remarkable cycle life of LTO cells, especially under demanding operational conditions such as fast charging and extreme temperatures, are gaining momentum. This paper reviews the latest advancements in LTO cell technology, with an emphasis on methods to enhance both energy density and cycle life. These advancements are paving the way for broader adoption of LTO cells in next-generation energy storage systems, providing a path toward more efficient, safe, and sustainable battery technologies.
References
Nemeth, T., Schröer, P., Kuipers, M., & Sauer, D. U. 2020. Lithium titanate oxide battery cells for high-power automotive applications–Electro-thermal properties, aging behavior and cost considerations. Journal of Energy Storage, 31: 101656. DOI: https://doi.org/10.1016/j.est.2020.101656
Liu, R., Ma, G., & Li, H. 2021. Recent progress of lithium titanate as anode material for high performance Lithium-Ion batteries. Ferroelectrics, 580(1): 172-194. DOI: http://dx.doi.org/10.1080/00150193.2021.1905737
Zhao, H. 2015. Lithium titanate-based anode materials. Rechargeable batteries: materials, technologies and new trends, 157-187. DOI: https://doi.org/10.1007/978-3-319-15458-9_6
Wang, S., Quan, W., Zhu, Z., Yang, Y., Liu, Q., Ren, Y., ... & Li, J. 2017. Lithium titanate hydrates with superfast and stable cycling in lithium-ion batteries. Nature communications. 8(1): 627. DOI: https://doi.org/10.1038/s41467-017-00574-9
Zhao, B., Ran, R., Liu, M., & Shao, Z. 2015. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: The latest advancements and future perspectives. Materials Science and Engineering: R: Reports, 98: 1-71 DOI: https://doi.org/10.1016/j.mser.2015.10.001.
Xia, H., Luo, Z., & Xie, J. 2014. Nanostructured lithium titanate and lithium titanate/carbon nanocomposite as anode materials for advanced lithium-ion batteries. Nanotechnology Reviews. 3(2): 161-175. DOI: https://doi.org/10.1515/ntrev-2012-0049
Hossain, M. H., Chowdhury, M. A., Hossain, N., Islam, M. A., & Mobarak, M. H. 2023. Advances of lithium-ion batteries anode materials—A review. Chemical Engineering Journal Advances, 16: 100569. DOI: https://doi.org/10.1016/j.ceja.2023.100569
Yuan, T., Soule, L., Zhao, B., Zou, J., Yang, J., Liu, M., & Zheng, S. 2020. Recent advances in titanium niobium oxide anodes for high-power lithium-ion batteries. Energy & Fuels, 34(11): 13321-13334. DOI: https://doi.org/10.1021/acs.energyfuels.0c02732
Zhang, X. Q., Zhao, C. Z., Huang, J. Q., & Zhang, Q. 2018. Recent advances in energy chemical engineering of next-generation lithium batteries. Engineering, 4(6): 831-847. DOI: https://doi.org/10.1016/j.eng.2018.10.008
Griffith, K. J., Harada, Y., Egusa, S., Ribas, R. M., Monteiro, R. S., Von Dreele, R. B., ... & Goodenough, J. B. 2020. Titanium niobium oxide: from discovery to application in fast-charging lithium-ion batteries. Chemistry of Materials, 33(1): 4-18. DOI: https://doi.org/10.1021/acs.chemmater.0c02955
Song, M. K., Park, S., Alamgir, F. M., Cho, J., & Liu, M. 2011. Nanostructured electrodes for lithium-ion and lithium-air batteries: the latest developments, challenges, and perspectives. Materials Science and Engineering: R: Reports, 72(11): 203-252. DOI: https://doi.org/10.1016/j.mser.2011.06.001
Gopalakrishnan, R., Goutam, S., Miguel Oliveira, L., Timmermans, J. M., Omar, N., Messagie, M., ... & Van Mierlo, J. 2016. A comprehensive study on rechargeable energy storage technologies. Journal of Electrochemical Energy Conversion and Storage, 13(4): 040801. DOI: https://doi.org/10.1115/1.4036000
Sun, X., Radovanovic, P. V., & Cui, B. 2015. Advances in spinel Li 4 Ti 5 O 12 anode materials for lithium-ion batteries. New Journal of Chemistry, 39(1): 38-63. DOI: https://doi.org/10.1039/C4NJ01390E
Su, X., Wu, Q., Zhan, X., Wu, J., Wei, S., & Guo, Z. 2012. Advanced titania nanostructures and composites for lithium ion battery. Journal of Materials Science. 47: 2519-2534. DOI: https://doi.org/10.1007/s10853-011-5974-x
Osiak, M., Geaney, H., Armstrong, E., & O'Dwyer, C. 2014. Structuring materials for lithium-ion batteries: advancements in nanomaterial structure, composition, and defined assembly on cell performance. Journal of Materials Chemistry A, 2(25): 9433-9460. DOI: https://doi.org/10.1039/C4TA00534A
Lyu, W., Fu, H., Rao, A. M., Lu, Z., Yu, X., Lin, Y., ... & Lu, B. 2024. Permeable void-free interface for all-solid-state alkali-ion polymer batteries. Science Advances, 10(42): eadr9602. DOI: https://doi.org/10.1126/sciadv.adr9602
Lyu, W., Yu, X., Lv, Y., Rao, A. M., Zhou, J., & Lu, B. 2024. Building Stable Solid‐State Potassium Metal Batteries. Advanced Materials, 2305795. DOI: https://doi.org/10.1002/adma.202305795
Lyu, Wang, Guoqiang He, and Ting Liu. 2020. "PEO‐LITFSI‐SiO2‐SN system promotes the application of polymer electrolytes in all‐solid‐state lithium‐ion batteries." Chemistry Open 9(6): 713-718 DOI: https://doi.org/10.1002/open.202000107
Tao, R., Fu, H., Gao, C., Fan, L., Xie, E., Lyu, W., ... & Lu, B. 2023. Tailoring Interface to Boost the High‐Performance Aqueous Al Ion Batteries. Advanced Functional Materials, 33(48): 2303072 DOI: https://doi.org/10.1002/adfm.202303072.
Wu, L., Fu, H., Lyu, W., Cha, L., Rao, A. M., Guo, K., ... & Lu, B. 2024. Rational Regulation of High-Voltage Stability in Potassium Layered Oxide Cathodes. ACS nano DOI: https://pubs.acs.org/doi/10.1021/acsnano.4c03813?goto=supporting-info.
Zhang, Lan, et al. 2018. "Electrolytic solvent effects on the gassing behavior in LCO|| LTO batteries." Electrochimica Acta 274: 170-176. DOI: https://doi.org/10.1016/j.electacta.2018.04.113
Julien, Christian M., and Alain Mauger. 2024 "Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries." Micromachines 15(3): 310 DOI: https://doi.org/10.3390/mi15030310.
Zhang, Y., Huang, J., Saito, N., Zhang, Z., Yang, L., & Hirano, S. I. 2023. Search for stable host materials as low-voltage anodes for lithium-ion batteries: A mini-review. Energy Storage Materials, 55: 364-387 DOI: https://doi.org/10.1016/j.ensm.2022.11.030.
Liu, P., Yang, L., Xiao, B., Wang, H., Li, L., Ye, S., ... & Liu, J. 2022. Revealing lithium battery gas generation for safer practical applications. Advanced Functional Materials, 32(47): 2208586. DOI: https://doi.org/10.1002/adfm.202208586
Wang, Qian, et al. 2017 "Quantitative investigation of the gassing behavior in cylindrical Li4Ti5O12 batteries." Journal of Power Sources 343: 564 570. DOI: https://doi.org/10.1016/j.jpowsour.2017.01.073
Ghosh, Shuvajit, et al. 2022. "A review on high-capacity and high-voltage cathodes for next-generation lithium-ion batteries." Journal of Energy and Power Technology 4(1): 1-77. DOI:10.21926/jept.2201002.
M. Faisal, M. A. Hannan, P. J. Ker, A. Hussain, M. B. Mansor and F. Blaabjerg, "Review of Energy Storage System Technologies in Microgrid Applications: Issues and Challenges," in IEEE Access. 6: 35143-35164, 2018, DOI: 10.1109/ACCESS.2018.2841407.
K. K. Afridi, M. Chen and D. J. Perreault, 2014,"Enhanced Bipolar Stacked Switched Capacitor Energy Buffers," in IEEE Transactions on Industry Applications, 50(2): 1141-1149. DOI: 10.1109/TIA.2013.2274633.
A. -I. Stroe, D. -L. Stroe, V. Knap, M. Swierczynski and R. Teodorescu, 2018,"Accelerated Lifetime Testing of High Power Lithium Titanate Oxide Batteries," 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, USA, 3857-3863, DOI: 10.1109/ECCE.2018.8557416.
C. Parthasarathy, H. Laaksonen and P. Halagi, 2021. "Characterisation and Modelling Lithium Titanate Oxide Battery Cell by Equivalent Circuit Modelling Technique," 2021 IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia), Brisbane, Australia. 1-5, DOI: 10.1109/ISGTAsia49270.2021.9715566.
I. Carrilero, J. Alonso, P. G. Pereirinha, D. Ansean, J. C. Viera and M. Gonzalez, 2018."Lithium Iron Phosphate and Lithium Titanate Oxide Cell Performance under High Power Requirements of Electric Bus Applications," 2018 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, IL, USA, 1-6, DOI: 10.1109/VPPC.2018.8605033.
K. Kishkin, D. Arnaudov, K. Kroics and V. Dimitrov, 2024, "Comparison of the Characretistics of a Lithium Ion and a Lithium Titanate Oxide Battery by Impedance Spectroscopy," 2024 23rd International Symposium on Electrical Apparatus and Technologies (SIELA), Bourgas, Bulgaria, 1-5, DOI: 10.1109/SIELA61056.2024.10637828.
E. Immonen and J. Hurri, 2021. "Equivalent circuit modeling of a high-energy LTO battery cell for an electric rallycross car," 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), Kyoto, Japan, 1-5, DOI: 10.1109/ISIE45552.2021.9576401.
M. Novak and Z. Novak, "Modeling and Experimental Validation of a LTO Battery Cell for a Hydrogen Hybrid Bus," 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), Helsinki, Finland, 2023, pp. 1-6, DOI: 10.1109/ISIE51358.2023.10227943
H. -j. Kim, M. -h. Oh, W. -k. Son, T. -i. Kim and S. -g. Park, 2006. "Novel Synthesis Method and Electrochemical Characteristics of Lithium Titanium Oxide as Anode Material for High Power Device," 2006 IEEE 8th International Conference on Properties & applications of Dielectric Materials, Bali, Indonesia. 464-467, DOI: 10.1109/ICPADM.2006.284215.
Bandini, Gabriele, et al. 2022."Characterization of lithium-batteries for high power applications." Journal of Energy Storage 50: 104607. DOI: https://doi.org/10.1016/j.est.2022.104607
L. -T. Chen et al., 2023. "Generic Stacked BMS Using Low-side MOSFET Control Architecture," 2023 International Conference on Consumer Electronics - Taiwan, 181-182. DOI: 10.1109/ICCE-Taiwan58799.2023.10226782.
T. Fangsuwannarak, D. Prasertdee, P. Rattanawichai and K. Fangsuwannarak, 2024, "Power Management Platform for an EV Charge Station Utilizing Photovoltaic with Battery System," 2024 8th International Conference on Power Energy Systems and Applications (ICoPESA), 530-534, DOI: 10.1109/ICOPESA61191.2024.10743432.
N. Zatta et al., 2023, "A Thermal Investigation on a Commercial Stack of Prismatic Lithium-Ion Batteries," 2023 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC), 1-6, DOI: 10.1109/ESARS-ITEC57127.2023.10114827.
A. -I. Stan, M. Swierczynski, D. -I. Stroe, R. Teodorescu, S. J. Andreasen and K. Moth, 2014, "A comparative study of lithium ion to lead acid batteries for use in UPS applications," 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC), Vancouver, BC, Canada, 1-8, DOI: 10.1109/INTLEC.2014.6972152.
M. B. Parsons and G. O. Mepsted, 2014. "Development of off-road hybrid-electric powertrains and review of emerging battery chemistries," 5th IET Hybrid and Electric Vehicles Conference (HEVC 2014), London, UK,1-7, DOI: 10.1049/cp.2014.0940.
M. R. Khan and S. K. Kaer, 2016, "Investigation of Battery Heat Generation and Key Performance Indicator Efficiency Using Isothermal Calorimeter," 2016 IEEE Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, 1-6, DOI: 10.1109/VPPC.2016.7791713.
M. Karami, S. Shahsavari, E. Immonen, H. Haghbayan and J. Plosila, 2023,"A Coupled Battery State-of-Charge and Voltage Model for Optimal Control Applications," 2023 Design, Automation & Test in Europe Conference & Exhibition (DATE), Antwerp, Belgium, 1-2, DOI: 10.23919/DATE56975.2023.10137028.
M. Karami, S. Shahsavari, E. Immonen, M. -H. Haghbayan and J. Plosila, 2023, "An Extension of the Kinetic Battery Model for Optimal Control Applications," 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), Helsinki, Finland, 1-6, DOI: 10.1109/ISIE51358.2023.10227986.
Edition, Seventh. 2000. "The authoritative dictionary of ieee standards terms." IEEE Std. 100-2000. DOI: https://doi.org/10.1109/IEEESTD.2000.322230
A. Avila, M. Lucu, A. Garcia-Bediaga, U. Ibarguren, I. Gandiaga and A. Rujas, 2021, "Hybrid Energy Storage System Based on Li-Ion and Li-S Battery Modules and GaN-Based DC-DC Converter," in IEEE Access, 9: 132342-132353. DOI: 10.1109/ACCESS.2021.3114785.
McManus, M. C. 2012. Environmental consequences of the use of batteries in low carbon systems: The impact of battery production. Applied Energy, 93: 288-295. DOI: https://doi.org/10.1016/j.apenergy.2011.12.062
Buberger, J., Kersten, A., Kuder, M., Eckerle, R., Weyh, T., & Thiringer, T. 2022. Total CO2-equivalent life-cycle emissions from commercially available passenger cars. Renewable and Sustainable Energy Reviews, 159: 112158.DOI: https://doi.org/10.1016/j.rser.2022.112158
D. Baek et al., 2019, "Battery-Aware Operation Range Estimation for Terrestrial and Aerial Electric Vehicles," in IEEE Transactions on Vehicular Technology, 68(6): 5471-5482, DOI: 10.1109/TVT.2019.2910452.
C. Zhang, K. Li, S. Mcloone and Z. Yang, 2014. "Battery modelling methods for electric vehicles - A review," 2014 European Control Conference (ECC), Strasbourg, France, 2673-2678, DOI: 10.1109/ECC.2014.6862541.
