ANALYSIS OF CONSTRAINT MODIFICATION IN MODEL-BASED CONTROL VALVE STICTION COMPENSATION

Authors

  • Sean Suraj Jeremiah Department of Chemical Engineering, Universiti Teknologi PETRONAS (UTP), 32610, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia) http://orcid.org/0000-0003-4355-6394
  • Anand Narayanasamy Department of Chemical Engineering, Universiti Teknologi PETRONAS (UTP), 32610, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia
  • Haslinda Zabiri Department of Chemical Engineering, Universiti Teknologi PETRONAS (UTP), 32610, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia http://orcid.org/0000-0003-1821-1028
  • Ramasamy Marappa Gounder Department of Chemical Engineering, Universiti Teknologi PETRONAS (UTP), 32610, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia http://orcid.org/0000-0003-1979-6996

DOI:

https://doi.org/10.11113/jt.v79.10727

Keywords:

Stiction, MIQP, MPC, backlash, optimization

Abstract

A model-based stiction compensation algorithm has been developed based on the H. Zabiri et al. Mixed Integer Quadratic Programming (MIQP) model predictive controller (MPC) algorithm which uses optimization to compensate for backlash in actuators. MIQP-based MPC shows promising result for stiction compensation. However, the backlash compensation formulation alone can remove oscillation caused by stiction dead-band but fails to reduce the offset caused by stiction slip-jump. Several modifications are proposed to solve the offset issue. The MIQP optimization problem constrains were loosened to give more flexibility to the optimizer. Simulation studies were conducted using a 2x2 distillation column model. With loosened constraints, MIQP based MPC reduced the offset at the expense of introducing oscillation into the system. 

 

Author Biography

  • Sean Suraj Jeremiah, Department of Chemical Engineering, Universiti Teknologi PETRONAS (UTP), 32610, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia)
    MSc. Candidate,
    Department of Chemical Engineering,
    Universiti Teknologi Petronas (UTP).

References

Luyben, W. L., Tyréus, B. D., & Luyben, M. L. 1999. Plantwide Process Control. London: McGraw-Hill.

Shoukat Choudhury, M. A. A., Thornhill, N. F., & Shah, S. L. 2005. Modelling valve Stiction. Control Engineering Practice. 13(5): 641-658.

Brásio, A. S., Romanenko, A., & Fernandes, N. C. 2014. Modeling, Detection and Quantification, and Compensation of Stiction in Control Loops: The State of the art. Industrial & Engineering Chemistry Research. 53(39): 15020-15040.

Shoukat Choudhury, M. A. A., Jain, M., & Shah, S. L. 2008. Stiction – Definition, Modelling, Detection And Quantification. Journal of Process Control. 18(3-4): 232-243.

Silva, B. C., & Garcia, C. 2014. Comparison of Stiction Compensation Methods Applied to Control Valves. Industrial & Engineering Chemistry Research. 53(10): 3974-3984.

di Capaci, R., & Scali, C. 2015. Review on Valve Stiction. Part I: From Modeling to Smart Diagnosis. Processes. 3(2): 422-451.

Srinivasan, R., & Rengaswamy, R. 2008. Approaches for Efficient Stiction Compensation in Process Control Valves. Computers & Chemical Engineering. 32(1-2): 218-229.

Gerry, J., & Ruel, M. 2001. How to Measure and Combat Valve Stiction Online. Paper Presented at the ISA International Fall Conference, Houston, TX.

Mohammad, M. A., & Huang, B. 2012. Compensation of Control Valve Stiction through Controller Tuning. Journal of Process Control. 22(9): 1800-1819.

Hagglund, T. 1997. Stiction Compensation in Control Valves. Paper Presented at the Control Conference (ECC), 1997 European.

Xiang Ivan, L. Z., & Lakshminarayanan, S. 2009. A New Unified Approach to Valve Stiction Quantification and Compensation. Industrial & Engineering Chemistry Research. 48(7): 3474-3483.

de Souza L. Cuadros, M. A. n., Munaro, C. J., & Munareto, S. 2012. Novel Model-free Approach for Stiction Compensation in Control Valves. Industrial & Engineering Chemistry Research. 51(25): 8465-8476.

Kayihan, A., & Doyle III, F. J. 2000. Friction Compensation For a Process Control Valve. Control Engineering Practice. 8(7): 799-812.

Rawlings, J. B. 2000. Tutorial Overview of Model Predictive Control. Control Systems, IEEE. 20(3): 38-52.

Morari, M., & H. Lee, J. 1999. Model predictive Control: Past, Present and Future. Computers & Chemical Engineering. 23(4-5): 667-682.

Seborg, D. E., Mellichamp, D. A., Edgar, T. F., & Doyle III, F. J. 2010. Process Dynamics and Control: John Wiley & Sons.

Camacho, E. F., & Alba, C. B. 2013. Model Predictive Control. Berlin: Springer.

Zabiri, H., & Samyudia, Y. 2006. A Hybrid Formulation and Design of Model Predictive Control for Systems Under Actuator Saturation and Backlash. Journal of Process Control. 16(7): 693-709.

Bemporad, A., & Morari, M. 1999. Control of Systems Integrating Logic, Dynamics, and Constraints. Automatica. 35(3): 407-427.

Mayne, D. Q., Rawlings, J. B., Rao, C. V., & Scokaert, P. O. M. 2000. Constrained Model Predictive Control: Stability and Optimality. Automatica. 36(6): 789-814.

Wang, T., Xie, L., Tan, F., & Su, H. 2015. A New Implementation of Open-loop Two-move Compensation Method for Oscillations Caused by Control Valve Stiction. IFAC-PapersOnLine. 48(8): 433-438.

Wood, R. K., & Berry, M. W. 1973. Terminal Composition Control of a Binary Distillation Column. Chemical Engineering Science. 28(9): 1707-1717.

Downloads

Published

2017-10-22

Issue

Section

Science and Engineering

How to Cite

ANALYSIS OF CONSTRAINT MODIFICATION IN MODEL-BASED CONTROL VALVE STICTION COMPENSATION. (2017). Jurnal Teknologi (Sciences & Engineering), 79(7). https://doi.org/10.11113/jt.v79.10727