DETECTION OF PUMP FAULTS BASED ON SOUND SIGNALS USING NON-NEGATIVE MATRIX FACTORIZATION

Anindita Adikaputri Vinaya; Fitri Nurmaulidah; Dhany Arifianto; Qurrotin Ayunina Maulida Okta Arifianti

doi:10.11113/jt.v82.13272

Authors

Anindita Adikaputri Vinaya Department of Engineering Management, Universitas Internasional Semen Indonesia, Gresik, East Java, Indonesia
Fitri Nurmaulidah Department of Engineering Management, Universitas Internasional Semen Indonesia, Gresik, East Java, Indonesia
Dhany Arifianto Department of Engineering Physics, Institut Teknologi Sepuluh Nopember, Surabaya, East Java, Indonesia
Qurrotin Ayunina Maulida Okta Arifianti Department of Engineering Management, Universitas Internasional Semen Indonesia, Gresik, East Java, Indonesia

DOI:

https://doi.org/10.11113/jt.v82.13272

Keywords:

Sound pattern, non-negative matrix factorization, pump faults, instantaneous frequency, log spectral distance

Abstract

Maintenance is very closely related to the performance of the production process. An alternative method that can be used to determine the damage to the engine is from the analysis of the sound pattern produced. If the sound source is more than one, then there will be signal mixing, and it will be a challenge in detecting damage to the engine. In this study, mixed signals will be separated. Separation of mixed sound signals was done using non-negative matrix factorization (NMF) method. Overall this study is aimed at detecting unbalance, misalignment, and bearing faults at pumps with microphones as sensors. The pumps used in this study were three pumps, where each pump had different conditions (unbalance, misalignment, and bearing fault). All three pumps have 3000 rpm. In this study, the recording process was carried out for 5 s. In this study, we also compare the location of the instantaneous frequency in full spectrum and corresponding frequency in local spectrum, and the distance between the spectra via the log spectral distance from the baseline signal and the estimated signal. Based on the instantaneous frequency approach, no error was found because of the instantaneous frequency suitability of the unbalanced machine condition with the estimated signal in the mixing configuration of three sources with two sensors. From the log spectral instance (LSD) results, the smallest value was obtained the smallest value in estimation 2, which tends to approach the unbalance condition with the LSD value of 1.0889. The most significant relative error is the estimated misalignment signal with a value of 11.2. However, overall damage can still be identified based on the pattern formed and some statistical parameters.

References

Heng, R. B. W., and Mohd Jailani Mohd Nor. 1998. Statistical Analysis of Sound and Vibration Signals for Monitoring Rolling Element Bearing Condition. Applied Acoustics. 53: 211-226.

Gelle, G., Colas, M., and Delaunay, G. 2000. Blind Sources Separation Applied to Rotating Machines Monitoring by Acoustical and Vibrations Analysis. Mechanical Systems and Signal Processing. 14(3): 427-442.

Duong, N. Q., Vincent, E., & Gribonval, R. 2010. Under-determined Reverberant Audio Source Separation Using a Full-rank Spatial Covariance Model. IEEE Transactions on Audio, Speech, and Language Processing. 18(7): 1830-1840.

Vinaya, A. A., and Arifianto, D. 2015. Fault Diagnosis of Rotating Machinery based on Acoustic Emission using PARAFAC-Source Separation. IPTEK Journal of Proceedings Series. 1(1): 183-184.

Atmaja, B. T., and Arifianto, D. 2009. Machinery Fault Diagnosis Using Independent Component Analysis (ICA) and Instantaneous Frequency (IF). 2009 International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME).

Mechefske, C. K. 1998. Objective Machinery Fault Diagnosis Using Fuzzy Logic. Mechanical Systems and Signal Processing. 12(6): 855-862.

Zhiliang Wang,Jian Gao, Chuanxia Jian,Yu Cen and Xin Chen. 2012. OLED Defect Inspection System Development through Independent Component Analysis. TELKOMNIKA Indonesian Journal of Electrical Engineering. 10(8): 2309-2319.

Chen, Y., & Meng, J. 2013. Study on BSS Algorithm Used on Fault Diagnosis of Gearbox. Indonesian Journal of Electrical Engineering and Computer Science. 11(6): 2942-2947.

Ypma, A., Leshem, A., Duin, R. P. 2002. Blind Separation of Rotating Machine Sources: Bilinear Forms and Convolutive Mixtures. Neurocomputing. 49(1): 349-368.

Yunata, A. S. 2010. Identification of Machine Damage Simultaneously in an Open Space with Independent Component Analysis. Thesis in Institut Teknologi Sepuluh Nopember, Surabaya.

Nion, D., Mokios, K. N., Sidiropoulos, N. D., & Potamianos, A. 2010. Batch and Adaptive PARAFAC-based Blind Separation of Convolutive Speech Mixtures. IEEE Transactions on Audio, Speech, and Language Processing. 18(6): 1193-1207.

Vinaya, A. A., & Arifianto, D. 2017. Multi-way Array Decomposition on Acoustic Source Separation for Fault Diagnosis of a Motor-pump System. International Journal of Electrical and Computer Engineering (IJECE). 7(6): 3052-3059.

Vinaya, Anindita Adikaputri, and Arifianto, Dhany. 2015. Underdetermined Blind Source Separation based Condition Monitoring. 2015 International Conference on Science in Information Technology (ICSITech IEEE).

FÃ©votte, C., Vincent, E., Ozerov, A. 2018. Audio Source Separation. Single-channel Audio Source Separation with NMF: Divergences, Constraints and Algorithms. Cham. Springer. 1-24.

Cichocki, A., Zdunek, R., Phan, A. H., Amari, S. I. 2009. Nonnegative Matrix and Tensor Factorizations: Applications to Exploratory Multi-way Data Analysis and Blind Source Separation. 1 ed. John Wiley & Sons.

Knaak, M., Kunter,M., and Filberi, D. 2002. Blind Source Separation for Acoustical Machine Diagnosis. 2002 14th International Conference on Digital Signal Processing Proceedings.

Hyvarinen, O. 2000. Independent Component Analysis: Algorithms and Ahallications. Neural Networks. 13(4-5): 411-430.

Ozerov, A., and FÃ©votte, C. 2010. Multichannel Nonnegative Matrix Factorization in Convolutive Mixtures for Audio Source Separation. IEEE Transactions on Audio, Speech, and Language Processing. 18(3): 550-563.

Mobius Institute. Unbalance. [Online]. Available: https://www.mobiusinstitute.com/site2/item.asp?LinkID=8000&iVibe=1&sTitle=Unbalance. [Accessed 8 October 2018].

Mobius Institute. Misalignment. [Online]. Available: https://www.mobiusinstitute.com/site2/item.asp?LinkID=10002&iVibe=1&sTitle=Analysis%20Definitions. [Accessed 8 October 2018].

Mobius Institute. Rolling element bearings. [Online]. Available: https://www.mobiusinstitute.com/site2/item.asp?LinkID=10003&iVibe=1&sTitle=Analysis%20Definitions. [Accessed 8 October 2018].

Gu, D. S., Choi, B. K. 2011. Machinery Faults Detection Using Acoustic Emission Signal. Acoustic Waves-From Microdevices to Helioseismology. InTech.

Freudenberger, J., Stenzel, S. & Venditti, B. 2010. Microphone Diversity Combining for In-car Applications. EURASIP Journal on Advances in Signal Processing. 5.

Van Hecke, B., Qu, Y., & He, D. 2015. Bearing Fault Diagnosis Based on a New Acoustic Emission Sensor Technique. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. 229(2): 105-118.