Ungkapan Kamiran-J Retak Permukaan pada Bar Silinder Padu Kenaan Beban Ragam I
DOI:
https://doi.org/10.11113/jt.v68.1691Keywords:
J-integral, surface crack, mode I, limit loadAbstract
In this study, J-integral expression for surface crack in solid cylindrical bars subjected to mode I loadings were developed and analysed. These expressions were used to predict J-integral along the crack front for semi-elliptical crack shaped which different in sizes and geometries. One of the advantages of these expression were to accelerate any large deformation analysis generally which takes longer computational time. Finite element analysis was used to determine a fully plastic parameter called h-function. There were two types of mode I loading used in this work namely tensile force and bending moment. Results found that J-integral predictions were succesfully conducted. However, the predictions were dependent on the crack parameters used. Increasing the crack depth, J-integral prediction required different limit load for different position along the crack front. For the case of shallow cracks, J-integral determinations can be implemented succesfully except for the case of position in the vicinity of the outer points.
References
Murakami, Y. & Tsuru, H. 1987. Stress Intensity Factors Handbook. Oxford: Pergamon Press. 657–658.
Findley, K. O., Koh S.W. & Saxena, A. 2007. Int. J. of Fatigue. 29: 822–828.
Laham, S. A. 1998. Stress Intensity Factor and Limit Load Handbook. British Energy Generation. SINTAP Issue 2.
Lei, Y. 2007. Int. J. of Pressure Vessels and Piping. 84: 545–559.
Lei, Y. 2008. Int. J. of Pressure Vessels and Piping. 8: 825–850.
Kim, Y. J. & Shim, D. J. 2005. Int. J. of Pressure Vessels and Piping. 82: 687–699.
Lei, Y. & Budden, P. J. 2004a. Int. J. of Pressure Vessels and Piping. 81: 589–597.
Lei, Y. & Budden, P.J. 2004b. J. of Strain Analysis. 39(6): 673–683.
Ruggieri, C. 2011. Procedia Engineering. 10: 1703–1708.
Lei, Y. & Fox, M. J. H. 2011. Int. J. of Pressure Vessels and Piping. 88(8–9): 348–355.
Rice, J. R. 1968. J. of Applied Mechanics. 35: 379–386.
Rahman, S. 2001. Engineering Fracture Mechanics. 68: 107–125.
Kumar, V., German, M. D. & Shih, C. F. 1981. An Engineering Approach for Elastic–Plastic Fracture Analysis. EPRI NP-1931, Project 1237.
Yagawa, G., Kitajima, Y. & Ueda, H. 1993. Int. J. of Pressure Vessels and Piping. 53: 457–510.
Lei, Y. 2004a. Int. J. of Pressure Vessels Piping. 81(1): 31–41.
Lei, Y. 2004b. Int. J. of Pressure Vessels and Piping. 81(1): 31–41.
Lei, Y. 2004c. Int. J. of Pressure Vessels and Piping.
(1): 21–30.
Ainsworth, R. A. 1984. Engineering Fracture Mechanics. 19: 633–42.
Miller, A. G. 1988. Int. J. of Pressure Vessels and Piping. 32: 191–327.
Dowling, N. E. 2006. Mechanical Behaviour of Materials: Engineering Methods for Deformation, Fracture and Fatigue. Ed. ke-3. New Jersey: Pearson Prentice Hall.
Cai, C. Q. & Shin, C. S. 2004. Nuclear Engineering and Design 227(3): 355–358.
Carpinteri, A. & Vantadori, S. 2009. Int. J. of Fatigue. 31:759–765.
Shin, C. S & Cai, C. Q. 2004. Int. J. of Fracture. 129: 239–264.
Carpinteri, A., Brighenti, R. & Vantadori, S. 2006. Int. J. of Fatigue. 28: 251–260.
Ismail, A. E., Ariffin, A. K., Abdullah, S. & Ghazali, M. J. 2012. Meccanica. 47: 1141–1156.
Ismail, A. E., Ariffin, A. K., Abdullah, S. & Ghazali, M. J. 2012. Indian J. of Engineering Materials and Science. 19(1): 5–16.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
