Simulation of Ytterbium Doped Double Clad Fiber Laser Output Power by Using Liekki Application Designer Software
DOI:
https://doi.org/10.11113/jt.v62.1896Keywords:
Fiber laser, Ytterbium doped double cladAbstract
Erbium and Ytterbium doped fibers are usually used as optical amplifiers in fiber optic communications. For high power fiber laser application, Ytterbium doped Double Clad Fiber is among the best candidate. However, the appropriate power budget should be reviewed on the Ytterbium doped Double Clad Fiber that can be used for certain purpose of laser application. Due to high cost and limited budget to initiate the development of fiber lasers, it is necessary to simulate the power distribution that just enough to produce the laser. Every component in the software application acted as a real component in the fiber laser. Several parameters and configuration of fiber laser are investigated and discussed.References
Agrawal, G. P. 2008. Nonlinear Fiber Optics. Optics and Photonics. 4th ed.
Jeong, Y., J. Sahu, D. Paybe, J. Nilsson. 2004. Ytterbium-doped Large-Core Fiber Laser with 1.36 kW Continuous Wave Output Power. Opt Express. 12(25): 6088–92
Gapontsev, D. 2008. 6 kW CW Single Mode Ytterbium Fiber Laser in All-fiber Format. IPG Photonics. Solid State and Diode Laser Technology Review.
Kelson, l., A. A. Hardy. 1998. Strongly Pumped Fiber Laser. IEEE J Quantum Electron. 34(9): 1570–7
Kelson, l., A. Hardy. 1999. Optimization of Strongly Pumped Fiber Lasers. J. Lightwave Technology. 17(5): 891–7
Pingxue, L., Z. Shuzhen, Z. Xuexia, B. Zhenao, L. Gang. A. 2010. 980 nm Yb-doped Single-mode Fiber Laser Pumped-by a 946 nm Q-Switched Nd:YAG laser. Optics and Laser Technology. 42 1229–1232
Pask, H. M., R. J. Carman, D. C. Hanna, A. C. Tropper, C. J. Mackechine, P. R. Barber, J. M. Dawes. 1995. Ytterbium-doped Silica Fiber Lasers: Versatile Sources for the 1-1.2 µm region., IEEE J. Selec. Top. Quant. Electron. 1: 2–13
Ammar, H., C. Thierry, O. Cafer, S. Francois. 2000. Dynamics and Stabilization of a High Power Side-pumped Yb-doped Double-clad Fiber Laser. Optics Communications. 186: 311–317.
Jinglin, L., Z. Chujun, W. Shuangchun. 2010. The Optimum Length of Liner Cavity Yb3+ Doped Double Clad Fiber Laser. Optics Communications. 283: 1449–1453.
Xiongyong, L., H. Chaohong. 2010. Optimization of Yb3+-doped Double-clad Fiber Lasers Using a New Approximate Analytical Solution. Optics and Laser Technology.
Zhengqian, L., Y. Chenchun. 2007. Simplified analytic Solution and a Novel Fast Algorithm for Yb3+-doped Double-clad Fiber Lasers. Optics Communications. 277: 118–124.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
