Modeling and Control of a Nonlinear Active Suspension Using Multi-Body Dynamics System Software
DOI:
https://doi.org/10.11113/jt.v67.1995Keywords:
Nonlinear active suspension, ride comfort, road handling, conventional composite nonlinear feedback control, linear quadratic regulator, control algorithmAbstract
This paper describes the mathematical modeling and control of a nonlinear active suspension system for ride comfort and road handling performance by using multi-body dynamics software so-called CarSim. For ride quality and road handling tests the integration between MATLAB/Simulink and multi-body dynamics system software is proposed. The control algorithm called the Conventional Composite Nonlinear Feedback (CCNF) control was introduced to achieve the best transient response that can reduce to overshoot on the sprung mass and angular of control arm of MacPherson active suspension system. The numerical experimental results show the control performance of CCNF comparing with Linear Quadratic Regulator (LQR) and passive system.
Â
References
Lin Z, Pachter M, Banda S. 1998. Toward Improvement of Tracking Performance Nonlinear Feedback for Linear Systems. Int J Contr. 70: 1–11.
G. Y. Cheng, K. M. Peng, B. M. Chen, and T. H. Lee. 2007. Improving transient performance in tracking general references using composite nonlinear feedback control and its application to high-speed XY-table positioning mechanism. IEEE Transactions on Industrial Electronics. 54: 1039–1051.
B. M. Chen, T. H. Lee, K. Peng, and V. Venkataramanan. 2006. Hard Disk Drive Servo Systems. 2nd ed. Springer, London.
X. Yu and W. Lan. 2012. Optimal Composite Nonlinear Feedback Control for a Gantry Crane System. In Control Conference (CCC), 2012 31st Chinese. 601–606.
D. Hrovat. 1997. Survey of Advanced Suspension Developments and Related Optimal Control Applications. Automatica. 33(10): 1781–1817.
M. F. Ismail, Y. M. Sam, K. Peng, M. K. Aripin, and N. Hamzah. 2012. A Control Performance of Linear Model and the Macpherson Model for Active Suspension System Using Composite Nonlinear Feedback. In Control System, Computing and Engineering (ICCSCE), 2012 IEEE International Conference. 227–233.
M. F. Ismail, K. Peng, N. Hamzah, Y. M. Sam, M. K. Aripin, and M. H. Che Hasan. 2012. A linear Model of Quarter Car Active Suspension System Using Composite Nonlinear Feedback Control. In Research and Development (SCOReD), 2012 IEEE Student Conference. 98–103.
Yahaya Md. Sam and Johari Halim Shah Bin Osman. 2005. Modeling And Control of the Active Suspension System Using Proportional Integral Sliding Mode Approach. Asian Journal of Control. 7(2): 91–98.
H. Du and N. Zhang. 2007. H∞ Control of Active Vehicle Suspensions with Actuator Time Delay. Journal of Sound and Vibration. 301: 236–252.
A. Abu-Khudhair, R. Muresan, and S. X. Yang. 2009. Fuzzy Control of Semi-Active Automotive Suspensions. 2009 IEEE International Conference on Mechatronics and Automation, Vols 1-7, Conference Proceedings. 2118–2122.
K.-S. Hong, D.-S. Jeon, W.-S. Yoo, H. Sunwoo, S.-Y. Shin, C.-M. Kim, and B.-S. Park. 1999. A New Model and an Optimal Pole-Placement Control of the Macpherson Suspension System. Society of Automotive Engineer.
X. Zhao, M. Kremb, and C. Schindler. 2013. Assessment of Wheel Loader Vibration on the Riding Comfort According to ISO Standards. Vehicle System Dynamics. 51: 1548–1567.
X. D. Xue, K. W. E. Cheng, Z. Zhang, J. K. Lin, D. H. Wang, Y. J. Bao, M. K. Wong, and N. Cheung. 2011. Study of art of automotive active suspensions. In Power Electronics Systems and Applications (PESA), 2011 4th International Conference on. 1–7.
C. Sandu, E. R. Andersen, and S. Southward. 2010. Multibody Dynamics Modelling and System Identification of a Quarter-car Test Rig with McPherson Strut Suspension. Vehicle System Dynamics. 49: 153–179.
T. Shim and P. C. Velusamy. 2010. Improvement of Vehicle Roll Stability by Varying Suspension Properties. Vehicle System Dynamics. 49: 129–152.
B.-C. Chen, Y.-H. Shiu, and F.-C. Hsieh. 2010. Sliding-mode Control for Semi-active Suspension with Actuator Dynamics. Vehicle System Dynamics. 49: 277–290.
W. Jun, D. A. Wilson, X. Wenli, and D. A. Crolla. 2005. Active Suspension Control to Improve Vehicle Ride and Steady-State Handling. In Decision and Control, 2005 and 2005 European Control Conference. CDC-ECC '05. 44th IEEE Conference on. 1982–1987.
M. Kaleemullah, W. F. Faris, and F. Hasbullah. 2011. Design of Robust H-Infiniti, Fuzzy and LQR Controller for Active Suspension of a Quarter Car Model. In Mechatronics (ICOM), 2011 4th International Conference On. 1–6.
K. Chen and D. G. Beale. 2003. Base Dynamic Parameter Estimation of a MacPherson Suspension Mechanism. Vehicle System Dynamics. 39: 227–244.
M. B. A. Abdelhady. 2003. A Fuzzy Controller for Automotive Active Suspension Systems.
Y. Watanabe and R. S. Sharp. 1999. Mechanical and Control Design of a Variable Geometry Active Suspension System. Vehicle System Dynamics. 32: 217–235.
F. Yu and D. A. Crolla. 1998. State Observer Design for an Adaptive Vehicle Suspension. Vehicle System Dynamics. 30: 457–471.
F. Yu and D. A. Crolla. 1998. An Optimal Self-Tuning Controller for an Active Suspension. Vehicle System Dynamics. 29: 51–65.
D. C. Chen and D. A. Crolla. 1998. Subjective And Objective Measures Of Vehicle Handling: Drivers & Experiments. Vehicle System Dynamics. 29: 576–597.
L. Jung-Shan and I. Kanellakopoulos. 1997. Nonlinear Design of Active Suspensions. Control Systems, IEEE. 17: 45–59.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.