THE PERFORMANCES OF MIXED EWMA-CUSUM CONTROL CHARTS BASED ON MEDIAN-BASED ESTIMATORS UNDER NON-NORMALITY
DOI:
https://doi.org/10.11113/jurnalteknologi.v86.20450Keywords:
Non-normal, EWMA chart, CUSUM chart, Mixed EWMA-CUSUM chart, robustAbstract
Exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts have been regularly used to monitor small process mean shifts. More recently, a mixture of EWMA and CUSUM charts known as mixed EWMA-CUSUM (MEC) control chart has been introduced for better small shift detection. However, like its predecessor, the MEC chart requires the normality assumption to ensure optimal performances. In the presence of outliers, which is the cause of non-normality, the parameters of the chart may be overestimated, leading to an unreliable monitoring process. To mitigate this problem, this paper employed median-based estimators namely, the median and modified one-step M-estimator (MOM), to control the location parameter via the MEC control chart. In this study, the performance of robust MEC charts for Phase II monitoring of location was compared with the standard MEC chart that is based on the sample mean. The performance of the robust MEC charts in terms of the average run length (ARL) on various g-and-h distributions clearly shows that a robust MEC chart based on the MOM estimator performs well regardless of the distributional shapes.
References
Shewhart, W. A. 1931. Economic Control of the Quality of Manufactured Products. Macmillan and Co Ltd, London.
Hafiz, Zafar, Nazir, Muhammad, Riaz, Muhammad, Riaz, Ronald, J., M., M., Does. 2015. Robust CUSUM Control Charting for Process Dispersion. Quality and Reliability Engineering International. 31(3): 369-379. Doi: https://doi.org/10.1002/qre.1596.
Ajadi, Muhammad, Riaz, Khalid, S, Al-Ghamdi. 2016. On Increasing the Sensitivity of Mixed EWMA–CUSUM Control Charts for Location Parameter. Journal of Applied Statistics. 43(7): 1262-1278. Doi: https://doi.org/10.1080/02664763.2015.1094453.
Muhammad, Naveed, Muhamma, Azam, Nasrullah, Khan, Muhammad, Aslam. 2018. Design of a Control Chart Using Extended EWMA Statistic. 6(4): 108. Doi: https://doi.org/10.3390/technologies6040108.
Hafiz, Zafar, Nazir, Nasir, Abbas, Muhammad, Riaz, Ronald, J., M., M., Does. 2016. A Comparative Study of Memory-type Control Charts under Normal and Contaminated Normal Environments. Quality and Reliability Engineering International. 32(4): 1347-1356. Doi: https://doi.org/10.1002/qre.1835.
Wu, T. L. 2018. Distribution-free Runs-based Control Charts. arXiv preprint arXiv:1801.06532.
Zhou, W., Liu, N., & Zheng, Z. 2020. A Synthetic Control Chart for Monitoring the Small Shifts in a Process Mean based on an Attribute Inspection. Communications in Statistics-Theory and Methods. 49(9): 2189-2204. Doi: https://doi.org/10.1080/03610926.2019.1568491.
Abdul Rahman, A. 2020. Robust Control Charts Via Winsorized and Trimmed Estimators. Doctoral Dissertation. https://etd.uum.edu.my/id/eprint/9837.
Song Z, Liu Y, Li Z, Zhang J. 2018. A Comparative Study of Memory‐type Control Charts based on Robust Scale Estimators. Quality and Reliability Engineering International. 34(6): 1079-102. Doi: https://doi.org/10.1002/qre.2309.
Shahid, Hussain, Shahid, Hussain, Xiaoguang, Wang, Shabbir, Ahmad, Muhammad, Riaz. 2020. On a Class of Mixed EWMA‐CUSUM Median Control Charts for Process Monitoring. Quality and Reliability Engineering International. 36(3): 910-946. Doi: https://doi.org/10.1002/qre.2608.
Atieh, Mohamadkhani, Amirhossein, Amiri. 2020. Developing Mixed EWMA-CUSUM and CUSUM-EWMA Control Charts based on MRSS and DRSS Procedures. Scientia Iranica. 0-0. Doi: https://doi.org/10.24200/sci.2020.55632.4328.
Gadde, Srinivasa, Rao, Muhammad, Aslam, Umer, Rasheed, Chi-Hyuck, Jun. 2020. Mixed EWMA–CUSUM Chart for COM-Poisson Distribution. Journal of Statistics and Management Systems. 23(3): 511-527. Doi: https://doi.org/10.1080/09720510.2019.1639947.
Nasir, Abbas, Muhammad, Riaz, Muhammad, Riaz, Ronald, J., M., M., Does. 2013. Mixed Exponentially Weighted Moving Average-Cumulative Sum Charts for Process Monitoring. Quality and Reliability Engineering International. 29(3): 345-356. Doi: https://doi.org/10.1002/qre.1385.
Abdul Rahman, A., Syed Yahaya, S. S., Atta, A. M. A. 2019. Robustification of CUSUM Control Structure for Monitoring Location Shift of Skewed Distributions based on Modified One-step M-estimator. Communications in Statistics-Simulation and Computation. 14: 1-8. Doi: https://doi.org/10.1080/03610918.2018.1532001.
Abdul Rahman, A., Syed Yahaya, S. S., Atta, A. M. A. 2018. A Robust CUSUM Control Cumulative Sum Control Chart for Monitoring the Process Mean based on a High Breakdown Point Scale Estimator. Journal of Engineering and Applied Sciences. 13(10): 3423-3429. Doi: https://doi.org/103923/jeasci.2018.3423.3429.
Abdul Rahman, A., Syed Yahaya, S. S., Atta, A. M. A. 2018. Monitoring Mean Shift of Skewed Distributions Using Modified One-Step M-estimator with EWMA Control Structure. Journal of Theoretical and Applied Information Technology. 96(13): 4004-4019.
Noor, N. F. M., Abdul-Rahman, A. Y. U., & Ali, A. M. 2023. The Effectiveness of Robust Mixed EWMA-CUSUM Control Chart on g-and-h Distribution. Journal of Theoretical and Applied Information Technology. 101(13): 5122-5129.
Castagliola, P. 2001. An-EWMA Control Chart for Monitoring the Process Sample Median. International Journal of Reliability, Quality and Safety Engineering. 8(02): 123-135. Doi: https://doi.org/10.1142/S0218539301000414.
Abdul Rahman, A., Syed Yahaya, S. S., & Atta, A. M. A. 2018. The Effect of Median based Estimators on CUSUM Chart. Journal of Telecommunication, Electronic and Computer Engineering. 10(1-10): 49-52. https://repo.uum.edu.my/id/eprint/24403.
Abdul Rahman, A., Syed Yahaya, S. S., Atta, A. M. A., Ahad, N. A., & Hamid, H. 2020. The Impact of Data Anomaly on EWMA Phase II Performance. Journal of Engineering and Applied Sciences. 15(15): 3010-3015. https://repo.uum.edu.my/id/eprint/27552.
Abdul-Rahman, A., Syed-Yahaya, S. S., & Atta, A. M. A. 2021. Robust Synthetic Control Charting. International Journal of Technology. 12(2). Doi: https://doi.org/10.14716/ijtech.v12i2.4216.
E., S., Page. 1954. Continuous Inspection Schemes. Biometrika. 41: 100-115. Doi: https://doi.org/10.1093/biomet/41.1-2.100.
Montgomery, D. C. 2009. Introduction to Statistical Quality Control. 6th ed. John Wiley & Sons Inc. 45-60.
S., W., Roberts. 2000. Control Chart Tests based on Geometric Moving Averages. Technometrics. 42(1): 97-101. Doi: https://doi.org/10.2307/1271439.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.