Influence of Inorganic Additives on the Performance of Polysulfone Ultrafiltration Membrane

Authors

  • Muhamad Zaini Yunos ENIGMA, JKBR, FKMP, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Zawati Harun Intergrated Material Process, AMMC, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Hatijah Basri FSTPI, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Mohd Fikri Shohur ENIGMA, JKBR, FKMP, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Mohd Riduan Jamalludin Intergrated Material Process, AMMC, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Sulaiman Hassan Intergrated Material Process, AMMC, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor
  • Ahmad Fauzi Ismail AMTEC, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

DOI:

https://doi.org/10.11113/jt.v65.2340

Keywords:

Zinc oxide, silver (I) oxide, humic acid

Abstract

The influence of zinc oxide and silver (I) oxide in polysulfone ultrafiltration membrane was studied. The membranes were prepared via phase inversion method. The morphology, surface roughness, hydrophillicity and antibacterial properties of membrane were investigated using SEM, AFM and contact angle device consecutively. It was found that membrane with zinc oxide additive has excellent pure water flux as compared to silver (I) oxide. However silver (I) oxide has better humic acid rejection due to the tradeoff effect. SEM-EDX for PSf/silver (I) oxide reveals that the accumulation of silver on top area in cross section of membrane while for zinc oxide seems more concentrated on the bottom. Interestingly, the AFM results support the previous result when PSf/zinc oxide showed better surface roughness on the top of the membrane. Eventhough zinc oxide is known one of antibacterial material, however from qualitative experiment using disc diffusion test (e-coli), there is no inhibition ring for PSf/zinc oxide membrane as compared to membrane with PSf/silver (I) oxide membrane which shows excellence inhibition ring.

References

A. W. Zularisam, A. F. Ismail, M. R. Salim, M. Sakinah, H. Ozaki.2007. Desalination. 212: 191–208.

W. Gao, H. Liang, J. Ma, M. Han, Z.-L. Chen, Z.-S. Han, G.-B. Li.2011. Desalination. 272: 1–8.

S. K. S. Al-Obeidani, H. Al-Hinai, M. F. A. Goosen, S. Sablani.2008. Journal of Membrane Science. 307: 299–308.

Y. Ma, F. Shi, J. Ma, M. Wu, J. Zhang, C. Gao.2011. Desalination. 272: 51–58.

J.-F. Li, Z.-L. Xu, H. Yang, C.-P. Feng, J.-H. Shi. 2007.

Y. Ma, F. Shi, J. Ma, M. Wu, J. Zhang, C. Gao. 2011. Desalination. 272: 51–58.

N. A. A. Hamid, A. F. Ismail, T. Matsuura, A. W. Zularisam, W. J. Lau, E. Yuliwati, M. S. Abdullah.2011. Desalination. 273: 85–92.

Z. Harun, M. R. Jamalludin, M. Z. Yunos, M. F. Shohur, A. F. Ismail.2013. Advanced Materials Research. 701: 319–322.

Z. Harun, M. F. Shohur, M. Z. Yunos, M. R. Jamalludin, A. F. Ismail.2013. Applied Mechanics and Materials. 328: 798–801.

M. R. Jamalludin, Z. Harun, H. Basri, M. Z. Yunos, M. F. Shohur.2013. Applied Mechanics and Materials. 372: 8–12.

H. Basri, A. F. Ismail, M. Aziz.2011. Desalination. 273: 72–80.

M. Ali, M. Zafar, T. Jamil, M. T. Z. Butt.2011. Desalination. 270: 98–104.

D. Y. Koseoglu-Imer, B. Kose, M. Altinbas, I. Koyuncu. 2012. Journal of Membrane Science.

K. Zodrow, L. Brunet, S. Mahendra, D. Li, A. Zhang, Q. Li, P. J. J. Alvarez.2009. Water Research. 43: 715–723.

M. Z. Yunos, Z. Harun, H. Basri, A. F. Ismail.2012. Advanced Materials Research. 488–489: 46–50.

M. F. Shohur, Z. Harun, Z. Yunos, S. Hasan, R. Jamalludin.2013. Applied Mechanics and Materials. 372: 3–7.

E. Yuliwati, A. F. Ismail, T. Matsuura, M. A. Kassim, M. S. Abdullah.2011. Desalination. 283: 214–220.

Downloads

Published

2013-11-15

How to Cite

Influence of Inorganic Additives on the Performance of Polysulfone Ultrafiltration Membrane. (2013). Jurnal Teknologi (Sciences & Engineering), 65(4). https://doi.org/10.11113/jt.v65.2340