Status dan Tahap Penggunaan Jentera dan Mesin di kalangan Kontraktor G7 di Malaysia

Authors

  • Mohamed Nor Azhari Azman Fakulti Pendidikan Teknikal dan Vokasional, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim, Malaysia
  • Fardila Mohd Zaihidee Fakulti Pendidikan Teknikal dan Vokasional, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim, Malaysia
  • Mohd Nasrun Mohd Nawi Pusat Pengajian Pengurusan Teknologi dan Logistik, Kolej Perniagaan, Universiti Utara Malaysia, 06010 Sintok, Malaysia
  • Kamarul Anuar Mohamad Kamar Lafarge Malaysia Berhad, 3, Jalan SS21/39, 47400 Petaling Jaya, Selangor, Malaysia
  • Zuhairi Abd Hamid Construction Research Institute of Malaysia, Construction Industry Development Board, 55200 Kuala Lumpur, Malaysia
  • Ramlee Mustapha Fakulti Pendidikan Teknikal dan Vokasional, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim, Malaysia
  • Khuan Wai Bing Fakulti Pengurusan dan Ekonomi , Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim, Malaysia
  • Tee Tze Kiong Fakulti Pendidikan Teknikal dan Vokasional, Universiti Pendidikan Sultan Idris, 35900 Tanjong Malim, Malaysia

DOI:

https://doi.org/10.11113/jt.v70.2612

Keywords:

Machine, machinery, construction site, foreign worker

Abstract

The wide use of machine and machinery in the construction industry can reduce the dependency on foreign workers. The Construction Industry Development Board is formulating a strategic plan to promote the use of machine and machinery in the construction industry. Therefore, this study aims to study the level and status of the usage machine and machinery among the G7 contractors at construction sites. The instrument used in the study consist of questionnaire and interviews. Based on the literature findings, there are 9 types of machine and 9 types machinery used in the construction industry. The percentage use of machine and machinery as well as the level of mechanisation for each phase of construction is at level 1, where the machine and machinery is still driven by the operator and do not involved high technology. The main recommendation in this study is to provide training on the latest information on machine and machinery and CPD (Continue Professional Development) training to promote the use of machine and machinery. In addition, the offering better incentives such as tax breaks and loan facilities should be awarded and provided by the government to activate the economic growth.

References

MITI. 2010. Malaysia-Towards Global Competitiveness. MITI Weekly Bulletin. Available: http://www.miti.gov.my/storage/documents/486/com.tms.cms.document.Document_d3b57f77-c0a81573-3a9d3a9d-a32cf3e0/1/MITI%20Weekly%20Bulletin%20Volume%2094%20-%2025%20May%202010.pdf (5/5/2011).

M. N. A. Azman, M. S. S. Ahamad, W. M. A. W. Hussin. 2012. Comparative Study on Prefabrication Construction Process. International Surveying Research Journal. 2: 45–58.

C. Simion-Melinte. 2013. Quality Management in Construction I. Ways to a New Approach of Quality. Quality - Access to Success. 14: 73–75.

JCB. 2009. Story of JCB. Available:http://www.jcb.co.uk/About/Who-we-are.aspx (4/1/2014)

CIDB. 2007. Construction Industry Master Plan (CIMP) 2006-2015. Construction Industry Development Board, Kuala Lumpur.

S. S. Kamaruddin, M. F. Mohammad, R. Mahbub, K. Ahmad. 2013. Mechanisation and Automation of the IBS Construction Approach: A Malaysian Experience. Procedia - Social and Behavioral Sciences. 105: 106–114.

CIDB. 2012. Mechanisation, Automation and Robotics in Construction. Construction Industry Development Board, Kuala Lumpur.

K. A. M. Kamar, Z. A. Hamid, M. K. Ghani, C. Egbu, M. Arif. 2011. Collaboration Initiative on Green Construction and Sustainability through Industrialized Buildings Systems (IBS) in the Malaysian Construction Industry. International Journal of Sustainable Construction Engineering and Technology. 1: 119–127.

M.N. Ajis, M.N. Saludin, A. Ismail, M.F. Keling, M.S. Shuib. 2010. Foreign Labourers and Its Impact on the Economic Development of Southeast Asia Countries. International Journal of the Humanities. 8: 187–201

H. Abdul-Rahman, C. Wang, L. C. Wood, S. F. Low. 2012. Negative Impact Induced by Foreign Workers: Evidence in Malaysian Construction Sector. Habitat International. 36: 433–443.

Y-G. Wee, M. R. Mohamad, N. Mustapha, S. Kaur. 2013. Enforcement of Minimum Wage Policy in Malaysia: Preliminary Findings on the Sentiments of Micro, Small and Mediun Enterprises. Academic Research International. 4: 355–361.

R. Mahbub. 2012. Readiness of A Developing Nation in Implementing Automation and Robotics in Construction: A Case Study of Malaysia. Journal of Civil Engineering and Architecture. 6: 858–866.

R. Mahbub. 2011. Readiness of a Developing Nation in Implementing Automation and Robotics Technologies in Construction: A Case Study of Malaysia, presented at the Sixth International Conference on Construction in the 21st Century (CITCVI 2011) Kuala Lumpur, Malaysia.

M. N. M. Nawi, M. N. A. Azman, K. A. M. Kamar, Z. A. Hamid. 2013. Kajian Terhadap Penggunaan IBS dalam Projek Swasta di Kawasan Lembah Klang. Jurnal Teknologi. 65: 9–15.

K. A. M. Kamar, Z. A. Hamid, M. N. A. Azman, M. S. S. Ahamad. 2011. Industrialized Building System (IBS): Revisiting Issues of Definition and Classification. International Journal of Emerging Sciences. 1: 120–132.

G. I. Idoro. 2012. Sustainability of Mechanisation in the Nigerian Construction Industry. Journal of Civil Engineering and Management. 18: 91–105.

M. N. A. Azman, K. A. M. Kamar, M. N. M. Nawi, A. Alarif, M. Albakri, R. Mustapha, K. W. Bing, Z. A. Hamid, T. T. Kiong. 2013. Review Machinery and Machine Used In Construction Site, presented at the IEEE Symposium on Business, Engineering and Industrial Applications.

M. Taylor, S. Wamuziri, I. Smith. 2003. Automated construction in Japan. In Proceedings of the Institution of Civil Engineers: Civil Engineering.

A. C. Webster. 1994. Technological Advance in Japanese Building Design and Construction. ASCE Press.

R. Mahbub. 2008. An Investigation into the Barriers to the Implementation of Automation and Robotics Technologies in the Construction Industry, Ph.D., School of Urban Development, Faculty of Built Environment and Engineering, Queensland University of Technology.

D. M. Gann. 1996. Construction as a Manufacturing Process? Similarities and Differences Between Industrialized Housing and Car Production in Japan. Construction Management and Economics. 14: 437–450.

CIDB. 2009. Annual Report. Construction Industry Development Board, Kuala Lumpur.

H. Yuko. 2001. Japanese Technology Policy: History and a New Perspective, Research Institute of Economy, Trade and Industry.

BCA. 2013. Guidelines on Mechanisation Credit B.A.C. Authority, Ed. Singapore.

UMW. 2013. Equipment. Available: http://www.umw.com.my/equipment.php (5/1/2014).

Tractors. 2014. About Us. Available: http://www.tractors.com.my/tractorsmalaysia/Home/About_Us.aspx (5/1/2014).

Downloads

Published

2014-08-27

Issue

Vol. 70 No. 1: September 2014

Section

Science and Engineering

License

Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.

How to Cite

Status dan Tahap Penggunaan Jentera dan Mesin di kalangan Kontraktor G7 di Malaysia. (2014). Jurnal Teknologi, 70(1). https://doi.org/10.11113/jt.v70.2612