OPTIMIZATION OF PRASEODYMIUM OXIDE BASED CATALYSTS FOR METHANATION REACTION OF SIMULATED NATURAL GAS USING BOX-BEHNKEN DESIGN

Authors

  • Salmiah Jamal Mat Rosid Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Wan Azelee Wan Abu Bakar Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Rusmidah Ali Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v75.2669

Keywords:

Natural gas, methanation reaction, praseodymium oxide, manganese oxide, ruthenium oxide, Box-Behnken design

Abstract

Malaysia energy demand on natural gas is increasing, leading to the purification of sour natural gas through the removal of carbon dioxide using catalytic conversion technique. Praseodymium oxide is preferred due to its properties which are suitable in the production of catalysers, polish glass and also as alloying agent. Therefore, a series of praseodymium oxide catalyst was prepared by incipient wetness impregnation method and was calcined at 400oC for 5 hours during screening reaction. The experimental Box-Behnken design was applied for optimizing the parameters in catalytic methanation reaction. The optimum parameters were found to be compatible with  the experimental result which showed that Ru/Mn/Pr (5:35:60)/Al2O3 calcined at 800°C with 65% Pr loading and 7 g of catalyst dosage gave 96% of CO2 conversion, determined using FTIR, and yielded about 41% of CH4 at reaction temperature of 400°C. In the stability test, the catalyst’s performance showed an increase and was stable up to 7 hours with 96% of CO2 conversion. X-ray Diffraction (XRD) analysis showed an amorphous structure while Field Emission Scanning Electron Microscope (FESEM) illustrated the presence of small and dispersed particles with undefined shape covering the catalyst surface. EDX analysis revealed that when calcination temperature increased, the mass ratio of Ru increased. Meanwhile Nitrogen Adsorption (NA) analysis revealed that Ru/Mn/Pr (5:35:60)/Al2O3 catalyst attained surface area of 134.39 m2/g. 

References

Curry, R. N. 1981. Fundamental of Natural Gas Conditioning. Oklahoma: Penwell Books Publishing Company. 66-67.

Radler, M. 2003. Worldwide Look at Reserves and Production. Oil & Gas Journal. 49: 46-47.

Humberto, V. F. Elson, L. Luiz, F. D. P. Antoninho, V. Neftali, L. V. C. Michael R. N. Adeilton, P. M. and Edson R. L. 2008. Influence of Rare Earth Doping on the Structural and Catalytic Properties of Nanostructured Tion Oxide. Nanoscale Res Lett. 3(5): 194-199.

Fierro, J. L. G. and Olivan, A. M. 1985. Catalytic Implication of the Unstable Lattice Oxygen of Praseodymium Oxide Journal of the Less-Common Metals. 107: 331-343.

Holder. E. and Coplen, T. 2004. The Periodic Table of the Elements (IUPAC). 26(1): 8.

Fierro, S. 2011. Physicochemical and Electrical Properties of Praseodymium Oxides. International Journal of Electrochemistry. Review Article. 1-7.

Toemen, S. Wan Abu Bakar W. A. and Ali, R. 2014. Investigation of Ru/Mn/Ce/Al2O3 Catalyst for Carbon Dioxide Methanation: Catalytic Optimization, Physicochemical Studies and RSM. Journal of Taiwan Institute of Chemical Engineers. 45: 2370-2378

Jones, C. Cole, K. J. Taylor, S. H. Crudace, M. J. and Hutching G. J. 2009. Copper Manganese Oxide Catalysts for Ambient Temperature Carbon Monoxide Oxidation: Effect of Calcination on Activity. Journal of Molecular Catalysis A: Chemical. 305: 121-124.

Chen, J. Ma Q. Rufford, T. E. Li Y. and Zhu Z. 2009. Influence of Calcination Temperatures of Feitknecht Compound Precursor on the Structure of Ni–Al2O3 Catalyst and the Corresponding Catalytic Activity in Methane Decomposition to Hydrogen and Carbon Nanofibers Applied Catalysis A: General. 362: 1-7.

Liu, J. Y. Qiu, Z. S. Huang, W. Luo, Y. and Song, D. D. 2014. Nano-pore Structure Characterization of Shales using Gas Adsorption and Mercury Intrusion Techniques. Journal of Chemical and Pharmaceutical Research. 6(4): 850-857.

Wan Abu Bakar W. A. Yusoff O.M. Ali R. and Yong C. K. 2008. Nickel Oxide Based Supported Catalysts for In Situ Reactions of Methanation and Desulfurization in the Removal of Sour Gases from Simulated Natural Gas. Catalyst Letter. 128: 127-136.

He Z. Huang C. Wang Q. Jiang Z. Chen S. and Song S. 2011. Preparation of a Praseodymium Modified Ti/SnO2- Sb/PbO2 electrode and its Application in the Anodic Degradation of the Azo Dye Acid Black 94. Int. J. Electrochem. Sci. 6: 4341-4354.

Su, P. Chu, O. and Wang, L. 2010. Studies on Catalytic Activity of Nanostructure Mn2O3 Prepared by Solvent-Thermal Method on Degrading Crystal Violet. Modern Applied Sciences. 4(5): 125-129.

Zhao A. Ying W. Zhang H. Ma H. and Fang D. 2012. Ni/Al2O3 Catalysts for Syngas Methanation: Effect of Mn Promoter. Journal of Natural Gas and Chemistry. 2: 170-177.

Downloads

Published

2015-06-23

Issue

Section

Science and Engineering

How to Cite

OPTIMIZATION OF PRASEODYMIUM OXIDE BASED CATALYSTS FOR METHANATION REACTION OF SIMULATED NATURAL GAS USING BOX-BEHNKEN DESIGN. (2015). Jurnal Teknologi, 75(1). https://doi.org/10.11113/jt.v75.2669