Electrospun Conditions of Poly(vinyl chloride) Nanofibrous Membrane Plasticized with Polyurethane

Authors

  • Kritsada Phatcharasit Department of Materials Science and Technology, Faculty of Science, Prince of Songkla University, Hat-Yai, Songkhla 90112, Thailand
  • Wirach Taweepreda Center of Excellence in Nanotechnology for Energy, Prince of Songkla University, Hat-Yai, Songkhla 90112,Thailand
  • Kanoktip Boonkerd Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok 10300, Thailand
  • Jin-Kuk Kim School of Nano and Advanced Materials Engineering, Gyeongsang National University, Gyeongnam, Jinju 660-701, South Korea

DOI:

https://doi.org/10.11113/jt.v68.3032

Keywords:

Electrospinning, poly(vinyl chloride), polyurethane, membrane

Abstract

Electrospun poly(vinyl chloride) (PVC) nanofibrous were prepared by electrospinning. Various concentration of polyurethane (PU) were added to PVC solution for plasticization of the electrospun nanofibrous. The pristine and plasticized nanofibrous were characterized by field emission scanning electron microscopy (FE-SEM), differencial thermal analysis (DTA), and thermogravimetry analysis (TGA), respectively. Thermal properties form DTA and TGA results indicated that the addition of PU decreased glass transition temperature (Tg) of PVC and increased heat resistance of PVC nanofiber. The dielectric constant of plasticized nanofibrous measured using precision LCR meter indicated that the membrane were dense.  

References

Lee, K. H., Kim, H. Y., Ryu, Y. J., Kim, K. W., Choi, S. W. 2003. Mechanical Behavior of Electrospun Fiber Mats of Poly(vinyl chloride)/polyurethane Polyblends. J Polym Sci Part B Polym Phys. 41: 1256–1262.

Pedicini, A., Farris R. J. 2003. Mechanical Behavior of Electrospun Polyurethane. Polymer. 44: 6857–6862.

Frenot, A., Chronakis, I.S. 2003. Polymer nanofibers assembled by electrospinning. Current Opinion in Colloid and Interface Science. 8(1): 64–75.

Zhang, Y., Xia, Z., Huang, H., Chen, H. 2009. Thermal degradation of polyurethane based on IPDI. J Anal Appl Pyrolysis. 84(1): 89–94.

Zhong, Z., Cao, Q., Jing, B., Wang, X., Li, X., Deng, H. 2012. Electrospun PVdF-PVC Nanofibrous Polymer Electrolytes for Polymer Lithium-ion Batteries. Mat Sci Eng Part B. 177(1): 86–91.

Phatcharasit, K., Taweepreda, W., Boonkerd, K., Kim, J.-K. 2014. Electrospun Epoxidized Natural Rubber with Poly(vinyl chloride) (ENR-PVC) Nanofibrous for PEMFC Applications. Advanced Materials Research. 844: 507–510.

Phatcharasit, K., Taweepreda, W., Boonkerd, K., Kim, J.-K. 2013. Preparation and Properties of Electrospun PVC Nanofiber. Advanced Materials Research. 770: 193–196.

Downloads

Published

2014-05-27

Issue

Vol. 68 No. 5: Special Issue on Sustainable Green Separation Towards Future Challanges Vol. 2

Section

Science and Engineering

License

Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.

How to Cite

Electrospun Conditions of Poly(vinyl chloride) Nanofibrous Membrane Plasticized with Polyurethane. (2014). Jurnal Teknologi, 68(5). https://doi.org/10.11113/jt.v68.3032