Application Study on Bubble Detection in a Metallic Bubble Column Using Electrical Resistance Tomography

Authors

  • Suzanna Ridzuan Aw Faculty of Electrical & Automation Engineering Technology, Terengganu Advance Technical Institute University College(TATiUC), Jalan Panchor, Telok Kalong, 24000, Kemaman, Terengganu, Malaysia
  • Ruzairi Abdul Rahim Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Mohd Hafiz Fazalul Rahiman School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh Putra Campus, 02600 Arau, Perlis, Malaysia
  • Fazlul Rahman Mohd Yunus Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Naizatul Shima Fadzil Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Mohd Zikrillah Zawahir Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Mohd Fahjumi Jumaah Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Muhammad Jaysuman Pusppanathan Process Tomography and Instrumentation Engineering Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Nor Muzakkir Nor Ayub Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Yasmin Abdul Wahab Research Group (PROTOM-i), Infocomm Research Alliance, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Salinda Bunyamin Faculty of Electrical & Automation Engineering Technology, Terengganu Advance Technical Institute University College(TATiUC), Jalan Panchor, Telok Kalong, 24000, Kemaman, Terengganu, Malaysia

DOI:

https://doi.org/10.11113/jt.v69.3290

Keywords:

Bubble columns, gas holdup, conducting boundary, electrical resistance tomography

Abstract

Electrical resistance tomography (ERT) has been chosen as the field of study because of its advantages of being low cost, suitable for various kinds and sizes of pipes and vessels, having no radiation hazard, and being non-intrusive. In the development of ERT systems for metallic bubble column, prior knowledge of the fundamental process of the ERT system whilst improving the design and operation of the process equipment is essential. The fabricated electrodes need to be electrically insulated from the metal wall. Besides that, conducting boundary strategy is implemented to overcome the grounding effect of the metallic vessel.

References

C. Yang, H. Wang, and Z. Cui. 2012. Application of Electrical Resistance Tomography in Bubble Columns for Volume Fraction Measurement. In 2012 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2012, May 13, 2012 - May 16, 2012, Graz, Austria. 1199–1203.

H. Jin, Y. Lian, Y. Qin, S. Yang, and G. He. 2012. Distribution Characteristics of Holdups in a Multi-stage Bubble Column Using Electrical Resistance Tomography.

J. Xue, M. Al-Dahhan, M. P. Dudukovic, and R. F. Mudde. 2008. Four-point Optical Probe for Measurement of Bubble Dynamics: Validation of the Technique. Flow Measurement and Instrumentation. 19: 293–300.

L. G. Neal and S. G. Bankoff. 1964. A High Resolution Resistivity Probe for Determination of Local Void Properties in Gas–liquid Flow. 490–494.

M. D. Supardan, Y. Masuda, A. Maezawa, and S. Uchida. 2007. The Investigation of Gas Holdup Distribution in a Two-phase Bubble Column Using Ultrasonic Computed Tomography. Chemical Engineering Journa. 30: 125–133.

M. Fransolet, P. Crine, P. Marchot, and D. Toye. 2005. Analysis of Gas Holdup in Bubble Columns with Non-Newtonian Fluid Using Electrical Resistance Tomography and Dynamic Gas Disengagement Technique. Chemical Engineering Science. 6118–6123.

M. Hamidipour and F. Larachi. 2010.Characterizing the Liquid Dynamics in Cocurrent Gas-liquid Flows in Porous Media Using Twin-plane Electrical Capacitance Tomography. Chemical Engineering Journal. 165: 310–323.

H. Jin, M. Wang, and R. A. Williams. 2007. Analysis of Bubble Behaviors in Bubble Columns Using Electrical Resistance Tomography. Chemical Engineering Journal. 130: 179–185.

H. Jin, S. Yang, M. Wang, and R. A. Williams. 2007. Measurement of Gas Holdup Profiles in a Gas Liquid Cocurrent Bubble Column Using Electrical Resistance Tomography. Flow Measurement and Instrumentation. 18: 191–196.

M. A.-D. Junli Xue, M. P. Dudukovic, R. F. Mudde. 2007. Bubble Velocity, Size, and Interfacial Area Measurements in a Bubble Column by Four-point Optical Probe.Wiley online, AICHE.

J. Kourunen, T. Niitti, and L. M. Heikkinen. 2011. Application of Three-Dimensional Electrical Resistance Tomography to Characterize Gas Holdup Distribution in Laboratory Flotation Cell. Minerals Engineering. 24: 1677–1686.

A. Shaikh and M. Al-Dahhan. 2005. Characterization of the Hydrodynamic Flow Regime in Bubble Columns via Computed Tomography. Flow Measurement and Instrumentation. 16: 91–98.

V. P. Chilekar1, M. J. F. Warnier1, J. van der Schaaf1, B. F. M. Kuster1, J. C. Schouten, J. R. van Ommen. 2005. Bubble Size Estimation in Slurry Bubble Columns from Pressure Fluctuations. Wiley online, AICHE, May.

M. R. Widyanto, M. B. Utomo, K. Kawamoto, B. Kusumoputro, and K. Hirota. 2006. Local Gas Holdup Measurement of a Bubble Column Using SONIA-Ultrasonic Non-Invasive Method. Sensors and Actuators A: Physical. 126: 447–454.

B. D. Grieve. 2002. On-line Electrical Impedance Tomography for Industrial Batch Processing. Degree of Doctor of Philosophy, Department of Chemical Engineering, UMIST Manchester, UK.

Z. Cao and L. Xu. 2012. Direct image reconstruction for 3D electrical resistance tomography by using the factorization method. In 2012 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2012, May 13, 2012 - May 16, 2012, Graz, Austria. 1919–1922.

J. K. L M Heikkinen , T Savolainen , P J Vauhkonen , J P Kaipio and M Vauhkonen. 2006. Real Time Three-dimensional Electrical Impedance Tomography Applied in Multiphase Flow Imaging. Measurement Science and Technology. 17.

H. Jin, S. Yang, G. He, M. Wang, and R. A. Williams. 2010. The Effect of Gas-liquid Counter-current Operation on Gas Hold-up in Bubble Columns Using Electrical Resistance Tomography. Journal of Chemical Technology and Biotechnology. 85: 1278–1283.

Y. Xu, H. Wang, Z. Cui, and F. Dong. 2009. Application of Electrical Resistance Tomography for Slug Flow Measurement in Gas/Liquid Flow Of Horizontal Pipe. In 2009 IEEE International Workshop on Imaging Systems and Techniques, IST 2009, May 11, 2009 - May 12, 2009, Hong Kong, China. 319–323.

F. Dong, E.-P. Li, and B.-B. Wang. 2007. Optimization Design of Electrical Resistance Tomography Data Acquisition System. In 6th International Conference on Machine Learning and Cybernetics, ICMLC 2007, August 19, 2007 - August 22, 2007, Hong Kong, China. 1454–1458.

F. Dong, C. Tan, J. Liu, Y. Xu, and H. Wang. 2006. Development of Single Drive Electrode Electrical Resistance Tomography System. IEEE Transactions on Instrumentation and Measurement. 55: 1208–1214.

M. Sharifi and B. Young. 2012. Qualitative Visualization and Quantitative Analysis of Milk Flow Using Electrical Resistance Tomography. Journal of Food Engineering. 112: 227–242.

S. R. Aw, R. A. Rahim, M. H. F. Rahiman, F. R. M. Yunus, and C. L. Goh. 2014. Electrical Resistance Tomography: A Review of the Application of Conducting Vessel Walls. Powder Technology. 254: 256–264.

M. S. B. A Plaskowski, R Thorn and T Dyakowski. 1995. Imaging Industrial Flow. London: IOP Publishing Ltd.

C. Tan and F. Dong. 2009. Gas-Water Two-Phase Flow Regime Identification with Feature Fusion from an ERT System and a VCone Meter. IEEE. 2: 218–222.

S. Hosseini, D. Patel, F. Ein-Mozaffari, and M. Mehrvar. 2010. Study of Solid-liquid Mixing in Agitated Tanks Through Electrical Resistance Tomography. Chemical Engineering Science. 65: 1374–1384.

C. Tan, F. Dong, and M. Wu. 2007. Identification of Gas/Liquid Two-Phase Flow Regime Through ERT-Based Measurement and Feature Extraction. Flow Measurement and Instrumentation. 18: 255–261.

S. J. Stanley and G. T. Bolton. 2008. A Review of Recent Electrical Resistance Tomography (ERT) Applications for Wet Particulate Processing. Particle and Particle Systems Characterization. 25: 207–215.

M. Wang, F. J. Dickin, and R. A. Williams. 1994. Electrical Resistance Tomography of Metal Walled Vessels and Pipelines. Electronics Letters. 30: 771–773.

M. Wang, F. J. Dickin, and R. A. Williams, 1995. Modelling and Analysis of Electrically Conducting Vessels and Pipelines in Electrical Resistance Process Tomography. IEE Proceedings: Science, Measurement and Technology. 142: 313–322.

E. L. Yuen, R. Mann, T. A. York, and B. D. Grieve. 2001. Electrical Resistance Tomography (ERT) Imaging of a Metal-Walled Solid-Liquid FilterE. Presented at the 2nd world Congress on Industrial Process Tomography, Hannover, Germant.

S. G. Liter, J. R. Torczynski, K. A. Shollenberger, and S. L. Ceccio. 2002. Electrical-Impedance Tomography for Opaque Multiphase Flows in Metallic (Electrically-Conducting) Vessels. Sandia National Labs., Albuquerque, NM (US); Sandia National Labs., Livermore, CA (US).

T. A. York, J. L. Davidson, L. Mazurkiewich, R. Mann, and B. D. Grieve. 2005. Towards Process Tomography for Monitoring Pressure Filtration. Sensors Journal, IEEE. 5: 139–152.

J. L. Davidson, 2004. Three-dimensional Electrical Impedance Tomography Applied to a Metal-walled Filtration Test Platform. Measurement Science and Technology. 15: 2263–2274.

(July 18th). Electrical Resistance Tomography. Available: http://www.itoms.com/solutions/electrical-resistance-tomography.

M. Kaminoyama, K. Nishi, R. Misumi, and A. Tagawa. 2007. Presented at the 5th World Congress on Industrial Process Tomography, Bergen, Norway.

L. Pakzad, F. Ein-Mozaffari, and P. Chan. 2008. Measuring Mixing Time in the Agitation of Non-Newtonian Fluids Through Electrical Resistance Tomography. Chemical Engineering and Technology. 31: 1838–1845.

A. Seppanen, K. Karhunen, A. Lehikoinen, J. P. Kaipio, and P. J. M. Monteiro. 2009. Electrical Resistance Tomography Imaging of Concrete. in 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2008, November 24, 2008 - November 26, 2008, Cape Town, South Africa. 231–232.

K. S. Cheng, D. Isaacson, J. C. Newell, and D. G. Gisser. 1989. Electrode Models for Electric Current Computed Tomography. IEEE Transactions on Biomedical Engineering. 36: 918–924.

P. Tahvildarian, H. Ng, M. D'Amato, S. Drappel, F. Ein-Mozaffari, and S. R. Upreti. 2011. Using Electrical Resistance Tomography Images to Characterize the Mixing of Micron-sized Polymeric Particles in a Slurry Reactor. Chemical Engineering Journal. 172: 517–525.

H. Jin, Y. Lian, Y. Qin, S. Yang, and G. He. 2013. Distribution Characteristics of Holdups in a Multi-stage Bubble Column Using Electrical Resistance Tomography. Particuology. 225–231.

M. G. Rasteiro, R. Silva, F. A. P. Garcia, and P. Faia. 2011. Electrical Tomography: A Review of Configurations and Applications to Particulate Processes. KONA Powder and Particle Journal. 29: 67–80.

Downloads

Published

2014-07-20

Issue

Vol. 69 No. 8: Special Issue on Advanced Measurement and Sensor Applications

Section

Science and Engineering

License

Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.

How to Cite

Application Study on Bubble Detection in a Metallic Bubble Column Using Electrical Resistance Tomography. (2014). Jurnal Teknologi (Sciences & Engineering), 69(8). https://doi.org/10.11113/jt.v69.3290