Adapting SICK PLS 101 Laser Scanner for 3D Interior Modelling Data Collection
DOI:
https://doi.org/10.11113/jt.v70.3458Keywords:
Laser scanner, sensor technology, 3D interior model, 3D as-built, building information modellingAbstract
This paper highlights on the process of optimizing a SICK PLS 101 laser scanner sensor to collect 3D data of building interiors. The sensor, which is an industrial-based, is used to perform tasks like inspection, metrology and safety. 3D modelling of building interiors has gained a lot of interest recently, and the model can be used as the 3D as-built and assist facility management processes, as well as for preserving and conservation of old important buildings. On the other hand, not all sensors are capable of generating suitable data that can be used to produce the 3D model. LIDAR for example, is the preferred sensor in collecting interior data, but is prohibitive to some due to its cost. In addition to that, it usually comes with its own programme to collect the data, which can lead towards standardization issues. Other system like stereo vision can also be used; however it has limitations when handling occlusion and clutter while capturing in-use interior data. Thus, utilizing a SICK PLS 101 laser scanner to collect 3D interior data will provide a low cost solution in producing 3D interior models. The laser sensor can only scan in 2D for 180° horizontal area, yet by installing a servo motor, it is able to scan a hemispherical area in one operation. The overall system is sufficient to gather 3D data of a building interior – it can handle occlusions and clutter within an interior, is able to produce a standard ASCII file as well as generating output with adequate resolution, which can also solve the issues of standardization and the massive datasets created by LIDAR. As a conclusion, by optimizing a SICK PLS 101 laser scanner, we are able to produce a low cost, low level solution to gather 3D data of building interiors. Due to the restriction in cost and features of other sensors, the capability to utilize this sensor is appreciated.Â
References
R. J. Whitaker, J. Gregor and P. F. Chen. 1999. Indoor Scene Reconstruction from Sets of Noisy Range Images. IEEE 2nd International Conference on 3D Digital Imaging and Modeling (3DIM 1999). Ottawa, Canada 4–8 October 1999.
U. Castellani, S. Livatino and R.B. Fisher. 2002. Improving Environment Modelling by Edge Occlusion Surface Completion. IEEE International Symposium on 3D Data Processing, Visualization and Transmission (3DPVT 2002). Padova, Italy 19–21 June 2002.
A. Gueorguiev, P. Allen, E. Gold and P. Blaer. 2000. Design, Architecture and Control of a Mobile Site-modelling Robot. IEEE International Conference on Robotics and Automation (ICRA 2000). San Francisco, CA April 2000.
P. Allen, I. Stamos, A. Gueorguiev, E. Gold and P. Blaer. 2001. AVENUE: Automated Site Modeling in Urban Environments. IEEE 3rd International Conference on 3D Digital Imaging and Modeling (3DIM 2001). Quebec City, Canada 28 May-1 June 2001.
F. Han, Z. Tu and S. C. Zhu. 2002. A Stochastic Algorithm for 3D Scene Segmentation and Reconstruction. In: A. Heyden et al. (eds.) Lecture Notes in Computer Science. Berlin Heidelberg: Springer-Verlag, 2002. 502–516.
A. Budroni and J. Boehm. 2009. Toward Automatic Reconstruction of Interiors from Laser Data. ISPRS 3rd International Workshop 3D-ARCH, Trento, Italy 25–28 February 2009.
B. Okorn, X. Xiong, B. Akinci and D. Huber. 2010. Toward automated Modeling of Floor Plans. 5th International Symposium on 3D Data Processing, Visualization and Transmission (3DPVT 2010). Paris, France 17–20 May 2010.
A. Adán and D. Huber. 2011. Reconstruction of Wall Surfaces Under Occlusion and Clutter in 3D Indoor Environments. Pittsburgh, Pennsylvania: Carnegie Mellon University. Available at: http://www.ri.cmu.edu/pub_files/2010/4/Report_A.Adan_D.Huber_A30_2010.pdf [Accessed 14 January 2011].
S. F. El-Hakim, P. Boulanger, F. Blais and J.A. Beraldin. 1997. A System for Indoor 3-D Mapping and Virtual Environments. Videometrics V. (3174). 21–35.
S. F. El-Hakim. 2001. 3D Modeling of Complex Environment. SPIE Electronic Imaging 2001. San Jose, California 21–26 January 2001.
S. Olufs and M. Vincze. 2010. Robust Room-atructure Estimation in Manhattan-like Environments from Dense 21/2D Range Data. Bonn, Germany: University of Bonn. Available at: http://www.ais.uni-bonn.de/~holz/iros10wssm/proceedings/04_olufs_vincze_final.pdf [Accessed 8 November 2010].
D. Murray and J.J. Little. 2000. Using Real-time Stereo Vision for Mobile Robot Navigation. Autonomous Robots. 8: 161–171.
Y. Furukawa, B. Curless, S. M. Seitz and R. Szeliski. 2009. Reconstructing building interiors from images. International Conference on Computer Vision (ICCV 2009). Kyoto, Japan 29 September–2 October 2009.
A. K. Krishnan and K. M. Krishna. 2010. A Visual Exploration Algorithm Using Semantic Cues that Constructs Image Based Hybrid Maps. Bonn, Germany: University of Bonn. Available at: http://www.ais.uni-bonn.de/~holz/iros10wssm/proceedings/06_krishnan_final.pdf [Accessed 8 November 2010].
SICK Technical Description PLS – 07/98, SICK AG, Germany, 1998.
S. A. Abdul Shukor, K. Young & E. J. Rushforth. 2011. 3D Modeling of Indoor Surfaces with Occlusion and Clutter. IEEE International Conference on Mechatronics. Istanbul, Turkey 13–15 April 201. 282–287.
S. A. Abdul Shukor. 2013. A Geometrical-based Approach to Recognise Structure of Complex Interiors. Ph.D. dissertation, WMG, Univ. Warwick, Coventry, UK.
S. A. Abdul Shukor and K. Young. 2011. A fast Knowledge-based Plane Reconstruction Method from Noisy 3D Point Cloud Data. In: Hamza, M. H. & Zhang, J. J., eds. IASTED 12th International Conference on Computer Graphics and Imaging. Innsbruck, Austria 16–18 February 2011. 24–31.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
