A Review of Process Tomography Application in Inspection System
DOI:
https://doi.org/10.11113/jt.v70.3459Keywords:
Inspection system, process tomography, ultrasonic tomography, x-ray tomography, optical tomography, electrical resistance tomography, electrical impedance tomographyAbstract
The inspection system is crucial to ensure the system is always in a good condition. A technique that can be used for inspection system is process tomography. By promising non-destructive approach; various types of process tomography applied in civil, manufacturing and electrical applications. The purpose of this paper is to review the types of process tomography such as ultrasonic tomography, x-ray tomography, optical tomography, electrical resistance tomography, and electrical impedance tomography that had been applied to the inspection system. Variety techniques of inspection based on those sensors briefly discussed in this paper. The result showed that the process tomography expanded tremendously in the inspection system. Finally, a potential future research on the inspection system in the civil application proposed in this paper.
References
R. Abdul Rahim, N. Mohd Nayan, and M. H. Fazalul Rahiman. 2006. Ultrasonic Tomography System for Liquid/Gas Flow: Frame Rate Comparison Between Visual Basic And Visual C++ Programming. J. Teknol. 44(D): 131–150.
S. Ridzuan Aw, H. Arshad Amari, J. Pusppanathan, M. H. Fazalul Rahiman, and Y. Abd Wahab. 2011. Initial Study on Ultrasonic Tomography for Multiphase Flow Application. J. Teknol. 54: 267–288.
Ruzairi Abdul Rahim. 2011. Optical Tomography; Principle, Techniques and Applications. First Edit. UTM Press. 1–15.
T. York, H. McCann, and K. Ozanyan. 2011. Agile Sensing Systems for Tomography. IEEE Sens. J. 11(12): 3086–3105.
J. Pusppanathan, R. Abdul Rahim, and M. H. Fazalul Rahiman. 2011. Ultrasonic Tomography System in Liquid-Gas Flow Monitoring. J. Teknol. 54: 255–266.
L. Liu and T. Guo. 2005. Seismic Non-destructive Testing on a Reinforced Concrete Bridge Column Using Tomographic Imaging Techniques. J. Geophys. Eng. 2(1): 23–31.
S. R. Iyer, S. K. Sinha, and A. J. Schokker. 2005. Ultrasonic C-Scan Imaging of Post-Tensioned Concrete Bridge Structures for Detection of Corrosion and Voids. Comput. Civ. Infrastruct. Eng. 20(2): 79–94.
P.-L. Liu and P.-L. Yeh. 2010. Vertical Spectral Tomography of Concrete Structures Based on Impact Echo Depth Spectra. NDT E Int. 43(1): 45–53.
M. a RodrÃguez, A. Ramos, and J. L. San Emeterio. 2006. Location of Multiple Proximate Flaws Using Perpendicular NDT Ultrasonic Arrays. Ultrasonics. 44(Suppl 1): e1105–9.
G. Sposito, C. Ward, P. Cawley, P. B. Nagy, and C. Scruby. 2010. A Review of Non-destructive Techniques for the Detection of Creep Damage in Power Plant Steels. NDT E Int. 43(7): 555–567.
B. Verma, T. K. Mishra, K. Balasubramaniam, and P. Rajagopal. 2013. Interaction of Low-frequency Axisymmetric Ultrasonic Guided Waves With Bends in Pipes of Arbitrary Bend Angle and General Bend Radius. Ultrasonics. 54(3): 801–8.
A. Turó, J. a. Chávez, M. J. GarcÃa-Hernández, A. Bulkai, P. Tomek, G. Tóth, A. Gironés, and J. Salazar. 2013. Ultrasonic Inspection System for Powder Metallurgy Parts. Measurement. 46(3): 1101–1108.
J. Han, W. Sun, and G. Pan. 2012. Dry Effect of Cementitious Materials on Testing Results of X-ray CT. Appl. Mater. Res. 451: 187–192.
N. Limodin, A. El, L. Wang, J. Lachambre, J. Buffiere, and E. Charkaluk. 2014. Application of X-ray Microtomography to Study the Influence of the Casting Microstructure Upon the Tensile Behaviour of an Al–Si alloy. Nucl. Inst. Methods Phys. Res. B. 324: 57–62.
A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, and M. E. Gr. 2011. Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography. IEEE Trans. Vis. Comput. Graph. 17(12): 2193–2202.
A. Contin and G. Schena. 2013 Inspection of Ground-Wall Insulation for ac Rotating Machines using X-Ray Tomography. In 2013 Electrical Insulation Conference. June: 342–345.
M. F. B. A. Shaib, S. Z. M. Muji, L. P. Ling, and M. M. A. Jamil. 2012. A Study on Optical Sensors Orientation for Tomography System Development. Sensors & Transducer. 140(5): 45–52.
S. Chang, Y. Mao, C. Flueraru, and S. Sherif. 2008. Optical Coherence Tomography: Technology and Applications. In International Conference on Optical Instruments and Technology: Optical Systems and Optoelectronic Instruments. 7156: 715606–715606–9.
N. H. Cho, U. Jung, S. Kim, and J. Kim. 2012. Non-destructive Inspection Methods for LEDs Using Real-time Displaying Optical Coherence Tomography. Sensors (Basel). 12(8): 10395–406.
L. Pîslaru-Danescu, A. M. Morega, S. Member, M. Morega, and V. Stoica. 2013. New Concept of Measurement Apparatus for the in situ Electrical Resistivity of Concrete Structures. In 8th International Symposium on Advanced Topics in Electrical Engineering.
J. Hola, Z. Matkowski, K. Schabowicz, J. Sikora, K. Nita, and S. Wójtowicz. 2012. Identification of Moisture Content in Brick Walls by Means of Impedance Tomography. COMPEL Int. J. Comput. Math. Electr. Electron. Eng. 31(6): 1774–1792.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
