Energy Efficiency Factors for Existing Toll Plazas
DOI:
https://doi.org/10.11113/jt.v70.3573Keywords:
Energy efficiency, toll plaza, energy consumptionAbstract
Energy efficiency is one of the most important issues for green buildings and their sustainability. This is not only due to the environmental impacts, but also because it incurs significantly high energy cost. The aim of this study is to identify the potential actions required for toll plaza that lead to energy reduction. The data were obtained through set of questionnaire and interviewing targeted respondents, including the employees at toll plaza, and architects and engineers who are directly involved in the design of highway projects. The data was analyzed using descriptive statistical analysis method. The findings of this study are the critical elements that influence the energy usage and factors that lead to energy wastage. Finally, potential actions  were recommended to reduce energy consumption in toll plazas.
References
Huovila, P. 2007. Buildings and Climate Change: Status, Challenges, and Opportunities. UNEP/Earthprint.
Saidur, R. 2009. Energy Consumption, Energy Savings, and Emission Analysis in Malaysian Office Buildings. Energy Policy. 37(10): 4104–4113.
Muhammad, B., M. Ismail, Z. Haron, and A. Ali Yussuf. 2011. Elastomeric Effect of Natural Rubber Latex on Compressive Strength of Concrete at High Temperatures. Journal of Materials in Civil Engineering. 23(12): 1697–1702.
Awal, A. and I. Shehu. 2013. Evaluation of Heat of Hydration of Concrete Containing High Volume Palm Oil Fuel Ash. Fuel. 105: 728–731.
Hossain, M. Z. and A. Awal. 2011. Flexural Response of Hybrid Carbon Fiber Thin Cement Composites. Construction and Building Materials. 25(2): 670–677.
Talaiekhozani, A., A. Keyvanfar, R. Andalib, M. Samadi, A. Shafaghat, H. Kamyab, M. A. Majid, R. M. Zin, M. A. Fulazzaky, and C. T. Lee. 2013. Application of Proteus Mirabilis and Proteus Vulgaris Mixture to Design Self-healing Concrete. Desalination and Water Treatment. (Ahead-Of-Print): 1–8.
Mirza, J., K. Saleh, M.-A. Langevin, S. Mirza, M.A.R. Bhutta, And M.M. Tahir. 2013. Properties of Microfine Cement Grouts at 4°C, 10° C and 20°C. Construction and Building Materials. 47: 1145–1153.
Ismail, M., E. Hamzah, G. C. Guan, and I. Abd Rahman. 2010. Corrosion Performance of Dual Phase Steel Embedded in Concrete. Arabian Journal For Science And Engineering. 35(2): 81.
Hussin, M., M. Bhutta, M. Azreen, P. Ramadhansyah, and J. Mirza, Performance of Blended Ash Geopolymer Concrete at Elevated Temperatures. Materials and Structures. 1–12.
Abdul Awal, A. And M. Warid Hussin. 2011. Effect of Palm Oil Fuel Ash in Controlling Heat of Hydration of Concrete. Procedia Engineering. 14: 2650–2657.
Ariffin, M., M. Azreen, M. W. Hussin, And M. A. Rafique Bhutta. 2011. Mix Design and Compressive Strength of Geopolymer Concrete Containing Blended Ash From Agro-industrial Wastes. Advanced Materials Research. 339: 452–457.
Abdulrahman, A., M. Ismail, and M. S. Hussain. 2011. Corrosion Inhibitors for Steel Reinforcement in Concrete: A Review. Scientific Research and Essays. 6(20): 4152–4162.
Abdulrahman, A., M. Ismail, and M. S. Hussain. 2011. Inhibition of Corrosion of Mild Steel in Hydrochloric Acid by Bambusa Arundinacea. International Review Of Mechanical Engineering. 5(1): 59–63.
14. Haron, Z., M. Othman, K. Yahya, M. Hainin, And H. Yaacob. 2013. The Effect of Application of Transverse Rumble Strips on Traffic Noise Levels. Research Journal of Chemistry and Environment. 17(2): 13–18.
Muench, S., J. Anderson, J. Hatfield, J. Koester, and M. Söderlund. 2010. Greenroads Rating System V1. 0. Seattle, WA: University Of Washington.
Chan, S. Green Building Index–MS1525: Applying MS1525: 2007 Code For Practice On Energy Efficiency And Use Of Renewable Energy For Non Residential Buildings. In Continuing Professional Development (CPD) Seminar, Kuala Lumpur. 2009.
Howard, J. L. 2003. The Federal Commitment to Green Building: Experiences and Expectations. Federal Executive, Office Of The Federal Environmental Executive, Washington.
Aamer Rafique Bhutta, M., N. Hasanah, N. Farhayu, M. W. Hussin, M. B. M. Tahir, and J. Mirza. 2013. Properties of Porous Concrete from Waste Crushed Concrete (Recycled Aggregate). Construction and Building Materials. 47: 1243–1248.
Patterson, M. G. 1996. What is Energy Efficiency?: Concepts, Indicators and Methodological Issues. Energy Policy. 24(5): 377–390.
Haas, R. 1997. Energy Efficiency Indicators in the Residential Sector: What Do We Know and What Has to be Ensured? Energy Policy. 25(7): 789–802.
Herring, H. 2006. Energy Efficiency—A Critical View. Energy. 31(1): 10–20.
Chung, W., Y. Hui, And Y. M. Lam. 2006. Benchmarking The Energy Efficiency of Commercial Buildings. Applied Energy. 83(1): 1–14.
Energy Information Administration. 1995. Work Report: Measuring Energy Efficiency In The United States’ Economy: A Beginning.
Zhao, J., N. Zhu, and Y. Wu. 2009. The Analysis of Energy Consumption of a Commercial Building in Tianjin, China. Energy Policy. 37(6): 2092–2097.
Sisson, B. and C. Van Aerschot. 2007. Energy Efficiency in Buildings: Business Realities and Opportunities; Summary Report. World Business Council Sustainable Development (WBCSD).
Joelsson, A. and L. Gustavsson. 2009. District Heating and Energy Efficiency in Detached Houses of Differing Size and Construction. Applied Energy. 86(2): 126–134.
Escrivá-Escrivá, G. 2011. Basic Actions to Improve Energy Efficiency in Commercial Buildings in Operation. Energy and Buildings. 43(11): 3106–3111.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
