Evaluation of Binder Absorption in Asphalt Mixture with Various Aging Conditions Using Rice Method

Authors

  • ThanwaFilza Nashruddin Faculty of Civil Engineering and Construction Research Alliance, UniversitiTeknologi Malaysia, 81310 Skudai, Johor Bahru
  • Ramadhansyah Putra Jaya Faculty of Civil Engineering and Construction Research Alliance, UniversitiTeknologi Malaysia, 81310 Skudai, Johor Bahru
  • Norhidayah Abdul Hassan Faculty of Civil Engineering and Construction Research Alliance, UniversitiTeknologi Malaysia, 81310 Skudai, Johor Bahru
  • Hasanan Md Nor Faculty of Civil Engineering and Construction Research Alliance, UniversitiTeknologi Malaysia, 81310 Skudai, Johor Bahru
  • Md. Maniruzzaman A. Aziz Faculty of Civil Engineering and Construction Research Alliance, UniversitiTeknologi Malaysia, 81310 Skudai, Johor Bahru
  • Che Norazman Che Wan Department of Civil Engineering, Politeknik Ungku Omar, 31400 Ipoh, Perak, Malaysia

DOI:

https://doi.org/10.11113/jt.v71.3758

Keywords:

Asphaltic concrete, polymer, aging, absorption, stability

Abstract

This study evaluated the effect of time dependent on the binder absorption of asphaltic concrete by comparing between Asphaltic Concrete 14 (AC14) and Polymer Modified Asphaltic Concrete14 (PMAC14) through rice method and subjected to aging. The stability of the samples was also examined. Two asphalt cements (60/70 and PG76) were used in this study. The result shows that the stability and binder absorption under long term aging is highest than that of short term and un-aged. In addition, the binder absorption has been found to follow a polynomial relationship with time-dependent.

References

Lu, X., Isacsson, U. 2002. Effect of aging on bitumen chemistry and rheology. Construction and Building Materials. 16(1): 15–22.

Che Norazman, C.W., Ramadhansyah, P.J., Hamzah, M.O. 2012. Properties of Porous Asphalt Mixture Made With Styrene Butadiene Styrene under Long Term Oven Ageing. Advanced Materials Research. 486: 378–383.

Airey, G. D. 2004. Fundamental Binder and Mixture Evaluation of Polymer Modified Bituminous Materials. International Journal of Pavement Engineering. 5(3): 137–151.

Chen, J., Liao, M., Shiah, M. 2002. Asphalt Modified by Styrene-Butadiene-Styrene Triblock Copolymer: Morphology and Model. Journal of Materials in Civil Engineering. 14(3): 224–229.

Panda, M., Mazumdar, M. 1999. Engineering Properties of EVA-Modified Bitumen Binder for Paving Mixes. Journal of Materials in Civil Engineering. 11(2): 131–37.

Murphy, M., O'Mahony, M., Lycett, C., Jamieson, I. 2001. Recycled Polymers for Use as Bitumen Modifiers. Journal of Materials in Civil Engineering. 13(4): 306–314.

Abdullah, M.E., Ahmad Zamhari, K., Buhari, R., Nafarizal Nayan, M., Hainin, M.R. 2014. Short Term and Long Term Aging Effects of Asphalt Binder Modified with Montmorillonite. Key Engineering Materials. 594/595: 996–1002.

Hagos.E.T. 2008. The Effect of Aging on Binder Properties of Porous Asphalt Concrete. TU-Delf, P343.

Jabatan Kerja Raya. 2008. Standard Specification for Road Works (JKR/SPJ/Rev2008). Malaysia.

ASTM D5581-07. 2007. Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus. Annual Book of ASTM Standards, West Conshohocken, Philadelphia, U.S.A.

ASTM D2041-11. 2011. Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures. Annual Book of ASTM Standards, West Conshohocken, Philadelphia, U.S.A.

AASHTO R30-02. 2002. Mixture Conditioning of Hot Mix Asphalt. Standard Specification for Transportation Materials and Methods of Sampling and Testing. Part 1B, American Association of State Highway and Transportation Officials.

Mohd Rosli, H., Ramadhansyah, P.J., Nor Asma, A.A., Dewi S. Jayanti., Nur Izzi, Md.Y. 2014. Influence of palm oil fuel ash as a modifier on bitumen to improve aging resistance. Journal of Engineering Research. 2(1): 34–46.

Lee.D.Y.1990. Absorption of Asphalt into Porous Aggregates. Strategic Highway Research Program. Washington, D.C.

Abdulmalik, M.M., Ibrahim A.A., Ramadhansyah P.J. 2014. The Indirect Tensile Strength of Palm Oil Fuel Ash (POFA) Modified Asphaltic Concrete. Applied Mechanics and Materials. 587: 1270–1275

Yi.T.C.2008. Performance Evaluation of Steel Slag as Natural Aggregates Replacement in Asphaltic Concrete. Universiti Sains Malaysia.

Mohd Khairul I., Hainin, M.R., Haryati Y., M. Naqiuddin, M.W., Mohd Ezree A. 2013. Effect of Aging on Resilient Modulus of Hot Mix Asphalt Mixtures. Advanced Materials Research. 723: 291–297.

Hamzah, M.O., Ramadhansyah, P.J., Prasetijo, J., Khairun Azizi, M.A. 2009.Effects of Temperature and Binder Type on the Dynamic Creep of Asphaltic Concrete. Modern Applied Science. 3(7): 3–14.

Downloads

Published

2014-12-07

How to Cite

Evaluation of Binder Absorption in Asphalt Mixture with Various Aging Conditions Using Rice Method. (2014). Jurnal Teknologi, 71(3). https://doi.org/10.11113/jt.v71.3758