A REVIEW OF THE CORROSION BEHAVIOR OF METALLIC HERITAGE STRUCTURES AND ARTIFACTS

Authors

  • K. M. Darain Architecture Discipline, Science, Engineering and Technology School; Khulna University, 9208 Khulna, Bangladesh
  • M. Z. Jumaat Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
  • S. M. Nazimuddin Architecture Discipline, Science, Engineering and Technology School; Khulna University, 9208 Khulna, Bangladesh
  • A. Ahsan Department of Civil Engineering, & Institute of Advanced Technology, University Putra Malaysia, 43400 Serdang, Malaysia
  • R. Rashid Department of Civil Engineering, & Institute of Advanced Technology, University Putra Malaysia, 43400 Serdang, Malaysia
  • M. M. A. Aziz Faculty of Civil Engineering, & UTM Construction Research Centre, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • M. Obaydullah Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
  • A. B. M. S. Islam Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

DOI:

https://doi.org/10.11113/jt.v77.4222

Keywords:

Corrosion, heritage structure, metal, artifacts, decay

Abstract

Awareness about restoring and preserving historically important structures and artifacts is gradually growing in many parts of the world. These artifacts and structures represent the culture, tradition and past of a nation. They are often also a source of national income through tourist activities. Besides masonry and wood work, metallic forms and relics are a vital part of the heritage which needs to be conserved. Certain metals have been used significantly throughout history in the creation of objects and structures. However, metals are prone to decay over time, particularly decay through corrosion. The basic mechanisms of metal corrosion, the various types of corrosion and existing remedial solutions are reviewed in this paper. The most significant factor affecting metal corrosion was found to be the surrounding environment, especially in marine areas. Different remedial measures can be implemented on corroded metals according to their specific properties. Recommendations for further study are offered at the end of the paper.

References

Park, S. C. 1988. Preservation Briefs 16: The Use of Substitute Materials on Historic Building Exteriors. Washington, DC: Preservation Assistance Division, National Park Service, US http://www nps gov/history/hps/tps/briefs/brief16 htm (accessed 11 October 2007).

Act, C. 18 Historic and Cultural Heritage Values.

Cruz, A. 2013. Re-strengthening Brisbane City Hall: A Case Study of Heritage Engineering.

Koleini, F., F. de Beer, M. H. A. Schoeman, I. Pikirayi, S. Chirikur, G. Nothnagel, J. M. Radebe. 2012. Efficiency of Neutron Tomography in Visualizing the Internal Structure of Metal Artefacts from Mapungubwe Museum Collection with the Aim of Conservation. Journal of Cultural Heritage. 13(3): 246-253.

Heritage, E. 2012. Practical Building Conservation: Metals. Ashgate Publishing.

Bernard, M. C., S. Joiret. 2009. Understanding Corrosion of Ancient Metals for the Conservation of Cultural Heritage. Electrochimica Acta. 54(22): 5199-5205.

Ashurst, J., N. Ashurst. 1988. Metals, Practical Building Conservation, vol. 4, English Heritage Technical Handbooks. Gower Technical Press, Aldershot, Hants, UK.

Ashurst, J., N. Ashurst. 1993. Practical Building Conservation, English Heritage Technical Handbook, Volume 4: Metals. Gower Technical Press, English Her itage. 193: 8-16.

Waite, D. S. 1990. Ornamental Ironwork: Two Centuries of Craftsmanship in Albany and Troy. New York: Mount Ida Press.

England, G. 2014. The Corrosion Process. United Kingdom: Gordon England.

Pipinato, A., C. Pellegrino, C. Modena. 2012. Assessment Procedure and Rehabilitation Criteria for the Riveted Railway Adige Bridge. Structure and Infrastructure Engineering. 8(8): 747-764.

Eng, M. B. B. 2013. Cast Iron. Construction Materials Reference Book. 45.

Turgoose, S. 1985. The Corrosion of Archaeological Iron During Burial and Treatment. Studies in Conservation. 30(1): 13-18.

Gayle, M., M. G. D. W. L. John, G. Waite, D. W. Look, J. G. Waite. 1998. Metals in America's Historic Buildings. DIANE Publishing.

Southworth, S., M. Southworth, C. C. Withers. 1978. Ornamental Ironwork: An Illustrated Guide to Its Design, History & Use In American Architecture. DR Godine.

Ru, X., R. Staehle. 2012. Historical Experience Providing Bases for Predicting Corrosion and Stress Corrosion in Emerging Supercritical Water Nuclear Technology: Part 1-Review. Corrosion. 69(3): 211-229.

Aston, J., E. B. Story. 1939. Wrought Iron, Its Manufacture, Characteristics and Applications. 2nd edition ed. Pittsburgh, Pa. United States: A. M. Byers Company.

Buchwald, V. F. 2005. Iron and Steel in Ancient Times. Vol. 29. Kgl. Danske Videnskabernes Selskab.

Badger, D. D., A. I. Works. 1981. Badger's Illustrated Catalogue of Cast-Iron Architecture. Dover.

Howell, J. S. 1987. Architectural Cast Iron: Design and Restoration. APT Bulletin. 19(3): 51-55.

Robertson, E. G., J. Robertson. 1977. Cast Iron Decoration: A World Survey: Thames and Hudson Australia.

Kreislova, K. 2008. Deterioration and Repair of Metals. SAHC Class Lecture Series: Czech Technical University in Prague.

Artioli, G. 2013. Science for the Cultural Heritage: The Contribution of X-Ray Diffraction. Rendiconti Lincei. 1-8.

Wang, L., B. P. Zhang, T. Shinohara. 2010. Corrosion Behavior of AZ91 Magnesium Alloy in Dilute Nacl Solutions. Materials & Design. 31(2): 857-863.

Saheb, M., F. Marsal, H. Matthiesen, D. Neff, P. Dillmann, D. Pellegrini. 2011. Fluctuation of Redox Conditions in Radioactive Waste Disposal Cell: Characterisation of Corrosion Layers Formed on Archaeological Analogues. Corrosion Engineering Science and Technology. 46(2): 199-204.

Kritzer, P., N. Boukis, E. Dinjus. 1999. Factors Controlling Corrosion in High-Temperature Aqueous Solutions: A Contribution to the Dissociation and Solubility Data Influencing Corrosion Processes. Journal of Supercritical Fluids. 15(3): 205-227.

Watkinson, D., M. Rimmer, Z. Kasztovszky, Z. Kis, B. Maróti, L. Szentmiklósi. 2013. The Use of Neutron Analysis Techniques for Detecting the Concentration and Distribution of Chloride Ions in Archaeological Iron. Archaeometry.

Verink, E. 2011. Simplified Procedure for Constructing Pourbaix Diagrams. Uhlig’s Corrosion Handbook. 111-124.

Asselin, E. 2011. Thermochemistry of the Fe, Ni and Co-NH. Minerals & Metallurgical Processing. 28(4): 169-175.

Wang, Z., Q. Zeng, L. Wang, Y. Yao, K. Li. 2014. Corrosion of Rebar in Concrete Under Cyclic Freeze–Thaw and Chloride Salt Action. Construction and Building Materials. 53: 40-47.

Bardal, E. 2004. Corrosion and Protection. Springer.

Song, F. X., X. M. Zhang, S. D. Liu, Q. Tan, D. F. Li. 2014. The effect of quench rate and overageing temper on the corrosion behaviour of AA7050. Corrosion Science, 78, 276-286.

Tobias, C., M. Eisenberg, C. Wilke. 1952. Diffusion and Convection in Electrolysis-A Theoretical Review. J Electrochem Soc. 99(12): 359C-365C.

Neff, D., M. Saheb, J. Monnier, S. Perrin, M. Descostes, V. L'Hostis, D. Crusset, A. Millard, P. Dillmann. 2010. A Review of the Archaeological Analogue Approaches to Predict the Long-term Corrosion Behaviour of Carbon Steel Overpack and Reinforced Concrete Structures in the French Disposal Systems. Journal of Nuclear Materials. 402(2-3): 196-205.

Chitty, W.-J., P. Berger, P. Dillmann, V. L'Hostis, G. Beranger. 2006. Contribution of Archaeological Analogues to the Comprehension of Long Term Corrosion of Concrete Reinforcements. Paper presented at the Journal de Physique IV (Proceedings).

Neff, D., P. Dillmann, L. Bellot-Gurlet, G. Beranger. 2005. Corrosion of Iron Archaeological Artefacts in Soil: Characterisation of the Corrosion System. Corrosion Science. 47(2): 515-535.

Neff, D., E. Vega, P. Dillmann, M. Descostes, L. Bellot-Gurlet, G. Beranger. 2007. Contribution of Iron Archaeological Artefacts to the Estimation of Average Corrosion Rates and the Long-term Corrosion Mechanisms of Low-Carbon Steel Buried In Soil. European Federation of Corrosion Publications. 48: 41.

Vega, E., P. Dillmann, P. Berger, P. Fluzin. 2007. Species Transport in the Corrosion Products of Ferrous Archaeological Analogues: Contribution to the Modelling of Long-Term Iron Corrosion Mechanisms. European Federation Of Corrosion Publications. 48: 92.

Cheng, Y. F. 2013. Stress Corrosion Cracking of Pipelines. Vol. 15. John Wiley & Sons.

Crolet, J. L. 1993. Mechanisms of Uniform Corrosion under Corrosion Deposits. Journal of Materials Science. 28(10): 2589-2606.

Wang, Z. Y., Y. Cong, T. Zhang. 2014. Effect of Hydrostatic Pressure on the Pitting Corrosion Behavior of 316L Stainless Steel. International Journal of Electrochemical Science. 9(2): 778-798.

Szklarska-Smialowska, Z., ZS-Smialowska. 2005. Pitting and Crevice Corrosion: NACE International Houston, TX.

Rosenfeld, I., I. Marshakov. 1964. Mechanism of Crevice Corrosion. Corrosion. 20(4): 115t-125t.

Keil, A. 2013. Pedestrian Bridges: Ramps, Walkways, Structures: Walter de Gruyter.

Oldfield, J. W. 1988. Electrochemical Theory of Galvanic Corrosion. Galvanic Corrosion. 5-22.

Schneider, M., K. Kremmer, C. Lammel, K. Sempf, M. Herrmann. 2014. Galvanic Corrosion of Metal/Ceramic Coupling. Corrosion Science. 80: 191-196.

Tavakkolizadeh, M., H. Saadatmanesh. 2001. Galvanic Corrosion of Carbon and Steel in Aggressive Environments. Journal of Composites for Construction. 5(3): 200-210.

Levy, A. V. 1988. The Erosion Corrosion Behavior of Protective Coatings. Surface & Coatings Technology. 36(1-2): 387-406. doi: Doi 10.1016/0257-8972(88)90168-5.

Ramachandran, S. 2013. Corrosion and Erosion Corrosion Type Determination from Parametric Shape Representation of Surfaces: Google Patents.

Karimi, A., J. Martin. 1986. Cavitation Erosion of Materials. International Metals Reviews. 31(1): 1-26.

Cole, I. S., D. Marney. 2012. The Science of Pipe Corrosion: A Review of the Literature on the Corrosion of Ferrous Metals in Soils. Corrosion Science. 56: 5-16.

Campbell, W. 1953. The Current Status of Fretting Corrosion. Paper presented at the Symp Fretting Corrosion.

Wang, D., D. Zhang, W. Zhao, S. Ge. 2014. Quantitative Analyses of Fretting Fatigue Damages of Mine Rope Wires in Different Corrosive Media. Materials Science and Engineering: A. 596: 80-88.

Kain, V., R. C. Prasad, P. K. De. 2002. Testing Sensitization and Predicting Susceptibility to Intergranular Corrosion and Intergranular Stress Corrosion Cracking in Austenitic Stainless Steels. Corrosion. 58(1): 15-37.

Biglari, F., K. M. Nikbin. 2014. Environmental Creep Intergranular Damage and Multisite Crack Evolution Model For Engineering Alloys. Computational Materials Science. 84: 267-277. doi: DOI 10.1016/j.commatsci.2013.12.020.

Zhu, L. K. K., Y. Yan, J. X. X. Li, L. J. J. Qiao, A. A. Volinsky. 2014. Stress Corrosion Cracking Under Low Stress: Continuous or Discontinuous Cracks? Corrosion Science. 80: 350-358.

Plumtree, A., S. B. Lambert. 2014. Stress Corrosion Cracking in Pipeline Steels. Key Engineering Materials. 577: 5-8.

Speidel, M. 2013. Corrosion Fatigue. Paper presented at the ICF6, New Delhi (India) 1984.

Aeritalia, G. V. d. C., A. Solina, M. De Sanctis, D. A. S. R. e Sperimentazioni. 2014. Fatigue, Fracture Mechanics and Corrosion Properties. Claimer Notice, T6.

Summitt, R., F. T. Fink. 1980. Pacer Lime: An Environmental Corrosion Severity Classification System. Defense Technical Information Center.

Hayward, A., F. Weare. 2011. Table of Standards. Steel Detailers' Manual. 141-142.

Samoilova, O. V., O. V. Zamyatina. 2005. Activity and Standards of ISO and IEC in the Field of Corrosion and Corrosion Protection. Protection of Metals. 41(2): 177-186.

Schütze, M. 2000. Corrosion and Environmental Degradation. Wiley-Vch.

Harris, R. 2015. Conserving Outdoor Metal Sculpture. Accessed on May 8, 2015, from http://www.buildingconservation.com/articles/conservingsculp/conservingsculp.htm.

Selwyn, L. 2004. Overview of Archaeological Iron: The Corrosion Problem, Key Factors Affecting Treatment, and Gaps in Current Knowledge. Proceedings of Metal. 294-306.

ENSCP, F. 2007. Tin and Copper Oxides in Corroded Archaeological Bronzes. Corrosion of Metallic Heritage Artefacts: Investigation, Conservation and Prediction of Long Term Behaviour. 239.

Dillmann, P., D. Watkinson, E. Angelini, A. Adriaens. 2013. Corrosion and Conservation of Cultural Heritage Metallic Artefacts. Elsevier.

Downloads

Published

2015-10-21

Issue

Section

Science and Engineering

How to Cite

A REVIEW OF THE CORROSION BEHAVIOR OF METALLIC HERITAGE STRUCTURES AND ARTIFACTS. (2015). Jurnal Teknologi, 77(1). https://doi.org/10.11113/jt.v77.4222