Malaysian Transverse Rumble Strips: A Review and Recommendations for Practice

Authors

  • Mohd Hanifi Othman Department of Structure and Materials, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor Malaysia
  • Zaiton Haron Department of Structure and Materials, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor Malaysia
  • Mohd Rosli Hainin Department of Geothechnics and Transportation, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor Malaysia
  • Khairulzan Yahya Department of Structure and Materials, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor Malaysia
  • Haryati Yaacob Department of Geothechnics and Transportation, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor Malaysia
  • Mohd Erwan Sanik Department of Infrastructures and Geomatic Engineering, Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v73.4304

Keywords:

Transverse rumble strips, thermoplastic materials, standard guidelines, recommendation for practice

Abstract

Transverse rumble strips (TRS) is a common choice to reduce vehicle speed and increase driver alertness on roadway. TRS is a series of marked (either flat or raised) transverse bars placed across the road in direction of traffic flow. It functions to assist driver to become aware through optical, vibration and audible effect thus encouraging drivers to reduce speed and increase their alertness in order to face any hazard that may exist ahead. Although often being used, in reality TRS usage in Malaysia still has some aspects that can be improved. The purpose of this paper is to critically review the definition of thermoplastic TRS, its effectiveness, standard guidelines in Malaysia, thermoplastic materials and colour and also to propose the recommendation in regard practice of TRS in order to increase its effectiveness. Besides the available literature source in the light of the latest published findings, personal interview have been done to several authorities which are headquarter and district public work department, local municipal and university regarding TRS application guidelines and practice in Malaysia. The authors synthesize the available findings on the TRS performance and standard guidelines to propose some recommendations for a better application practice of TRS in particular in Malaysia. The proposal of all the findings hopefully would be beneficial to authorities in improving the practices of TRS. 

References

Shinar, D. 2007. Traffic Safety and Human Behaviour, Amsterdam, Elsevier.

Kee, S. S., Tamrin, S. B. M. & Goh, Y. M. 2010. Driving Fatigue and Performance among Occupational Drivers in Simulated Prolonged Driving. Global Journal of Health Science. 2(1): 167–177.

Ng, W. K. & Selva, P. 2003. OSH Profile in the Transport Sector in Particular Commuting Hazard [Online]. Available: Http://Www.Mtuc.Org.My/Osh_Profile_Transport.Htm. [Accessed 5 February 2011].

Martindale, A. & Urlich, C. 2010. Effectiveness of Transverse Road Markings on Reducing Vehicle Speeds. Wellington: NZ Transport Agency

Edquist, J. 2008. The Effects of Visual Clutter on Driving Performance. Doctor of Philosophy, Monash University.

Jørgensen, F. & Wentzel-Larsen, T. 1999. Optimal Use of Warning Signs in Traffic. Accident Analysis and Prevention. 31(6): 729–738.

Charlton, S. G. 2007. The Role of Attention in Horizontal Curves: A Comparison of Advance Warning, Delineation, and Road Marking Treatments. Accident Analysis and Prevention. 39(5): 873–885.

Thompson, T. D., Burris, M. W. & Carlson, P. J. 2006. Speed Changes Due To Transverse Rumble Strips On Approaches To High-Speed Stop-Controlled Intersections. Transportation Research Record: Journal of the Transportation Research Board: 1–9.

Rothenberg, H., Benavente, M. & Swift, J. 2004. Report on Passive Speed Control Devices. Amherst: Massachusetts Traffic Safety Research Program.

Freeman, J. R., Bansen, J. A., Wemple, B. & Spinks, R. 2008. Innovative Operational Safety Improvements at Un-Signalized Intersections. Tallahassee, Florida: Florida Department of Transportation.

Carlson, P. J. & Miles, J. D. 2003. Effectiveness Rumble Strips On Texas Highways: First Year Report. Texas Transportation Institute.

Corkle, J., Joni, L., Giese, M., Marti, M. 2001. Investigating the Effectiveness of Traffic Calming Strategies on Driver Behaviour, Traffic Flow and Speed. St. Paul, Minnesota: Minnesota Local Road Research Board.

Liu, P., Huang, J., Wang, W. & Xu, C. 2011. Effects of Transverse Rumble Strips on Safety of Pedestrian Crosswalks on Rural Roads in China. Accident Analysis and Prevention. 43(6): 1947–1954.

Torbic, D. J., Hutton, J. M., Bokenkroger, C. D., Bauer, K. M., Harwood, D. W., Gilmore, D. K., Dunn, J. M. & Rochento, J. J. 2009. Guidance for the Design and Application of Shoulder and Centreline Rumble Strips. NCHRP Report 641. Washington D.C: Transportation Research Board.

Morena, D. A. 2002. The Nature And Severity Of Drift-Off Road Crashes On Michigan Freeways, And The Effectiveness Of Various Shoulder Rumble Strip Designs. Lansing: Federal Highway Administration – Michigan Division.

Bahar, G., Erwin, T., Mackay, M., Smiley, A. & Tighe, S. 2005. Best Practice Guidelines for the Design and Application of Transverse Rumble Strips. Ottawa, Canada: Transportation Association Of Canada

Meyer, E. 2006. Guidelines for the Application of Removable Rumble Strips. Lawrence, Kansas: Meyer Intelligent Transportation Systems.

Gorrill, D. 2007. Transverse Rumble Strips. Transportation Research Synthesis. Saint Paul, Minnesota: Minnesota Department of Transportation.

Meyer, E. 2001. A New Look At Optical Speed Bars. ITE Journal. 44–48.

MOW. 2002. Traffic Calming Guidelines. Kuala Lumpur: Highway Planning Unit, Ministry Of Work.

Yang, Y., Sun, X. & He, Y. 2010. Effectiveness of Rumble Strips on Freeways. ICCTP 2010: Integrated Transportation Systems.

Bendtsen, H., Haberl, J., Sandberg, U. & Watts, G. 2004. Traffic Management and Noise Reducing Pavements. Recommendations on Additional Noise Reducing Measures. SILVIA Deliverable 12. European Commission DG Tren- Growth.

Dudek, C. L., Huchingson, R. D., Creasey, F. T. & Pendleton, O. J. 1988. Field Studies Of Temporary Pavement Markings At Overlay Project Work Zones On Two-Lane, Two-Way Rural Highways. Transportation Research Record 1160. Washington D.C.: National Research Council.

REAM. 2004. Guidelines on Traffic Control and Management Devices. Kuala Lumpur, Road Engineering Association of Malaysia.

Othman, M. H., Haron, Z., Yahya, K. & Yaacob, H. 2010. Transverse Rumble Strips Application in Malaysia. In: Geotropika 2010. Kota Kinabalu, Sabah.

Thomas, G. B. & Schloz, C. 2001. Durable, Cost-Effective Pavement Markings Phase I: Synthesis of Current Research. Ames, Iowa: Centre for Transportation Research and Education, Iowa State University.

Lopez, C. A. 2004. Pavement Marking Handbook. Austin: Texas Department of Transportation.

Bachner, A. & Swain, K. 2008. Traffic Signs and Pavement Markings. Cornell Local Roads Program.

Migletz, J., Fish, J. K. & Graham, J. L. 1994. Roadway Delineation Practices Handbook. Washington DC: Federal Highway Administration.

Niessner, C. W. 2008. Colour Effectiveness of Yellow Pavement Marking Materials. Washington DC: Transportation Research Board.

Gibbons, R. B. 2006. Pavement Marking Visibility Requirements during Wet Night Conditions. Charlottesville, Virginia: Virginia Transportation Research Council

Gates, T. J. And Hawkins, H. G. 2002. The Use Of Wider Longitudinal Pavement Markings in the United States. Paper Vis2002-31. Texas Transportation Institute, College Station.

Carlson, P. J., Pike, A. M., Miles, J. D. & Park, E. S. 2007. Pavement Marking Visibility: Brighter Versus Wider. 18th Biennial Transportation Research Board (TRB) Visibility Symposium College Station. Texas: Transportation Research Board.

Benekohal, R. F., Kastel, L. M. & Suhale, M. 1992. Evaluation and Summary of Studies in Speed Control Methods in Work Zones. Report FHWA-Il-Ui-237. Illinois Department of Transportation.

Hou, S., Sun, X., He, Y. & Wang, J. 2010. Vehicle’s Shock Absorbing Capacity and Roadway Rumble Strips. ICCTP 2010: Integrated Transportation Systems. 585–590.

Thompson, T. D. 2004. Evaluation of Rumble Strips at Rural Stop-Controlled Intersection in Texas. Texas A&M University.

Downloads

Published

2015-03-30

How to Cite

Malaysian Transverse Rumble Strips: A Review and Recommendations for Practice. (2015). Jurnal Teknologi (Sciences & Engineering), 73(4). https://doi.org/10.11113/jt.v73.4304