Measuring Student Satisfaction Towards iPVD

Authors

  • Norliza Abd. Rahmani Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Selangor, Malaysia
  • Siti Rozaimah Sheikh Abdullah Centre of Engineering Education Research, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Selangor, Malaysia
  • Faezah Esa Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Selangor, Malaysia
  • Nazlena Muhamad Ali Institute of Visual and Informatic , Universiti Kebangsaan Malaysia, Selangor, Malaysia

DOI:

https://doi.org/10.11113/jt.v74.4552

Keywords:

iPVD, Likert scale, mechanical design

Abstract

This paper examines student satisfaction towards iPVD software. Students were given a brief introduction on this software and required to access online. The URL for iPVD during testing period is http://103.18.247.37/vessel. A survey form was designed by focusing on a variety of iPVD aspects and compared with ASME Manual Code. Results obtained from this survey analysis help us to improve the performance and quality of iPVD software. It was found that students prefer to use iPVD software for calculation with huge data that require accuracy. However, knowledge in basic of calculation such as ASME Manual Code is necessary in using this software.

References

Sinnot, R & Towler, G. 2009. Chemical Engineering Design. Edisi ke-5. Massachussetts: Elsevier Ltd.

Norliza Abd. Rahman, Siti Rozaimah Sheikh Abdullah & Johan Haris. 2014.

Pembangunan Modul Interaktif bagi Prosedur Rekabentuk Mekanik Proses. Kongres P & P UKM 2013/2014.

Azrul R. A. R. 2008. Software–Perisian http://ilplabuan.gov.my/download/080425%20artikel%20software%20-%20azrul.pdf [3 Oktober 2010] ASME Code 2012.

Copyright iPVD, starting 1/5/2014. UKM3.2.29/108/2/916.

Downloads

Published

2015-05-14

How to Cite

Measuring Student Satisfaction Towards iPVD. (2015). Jurnal Teknologi (Sciences & Engineering), 74(3). https://doi.org/10.11113/jt.v74.4552