FACILITY MANAGEMENT VARIABLES THAT INFLUENCE SUSTAINABILITY OF BUILDING FACILITIES

Authors

  • Shubashini Ganisen Center for Real Estate Studies, Faculty of Geoinformation and Real Estate, Universiti Teknologi Malaysia
  • L. Jawahar Nesan Chairman, International Institute for Affordable and Sustainable Housing 63, North Car Street Sirkali (post)609110, Tamilnadu, India
  • Izran Sarrazin Mohammad Center for Real Estate Studies, Faculty of Geoinformation and Real Estate, Universiti Teknologi Malaysia
  • Abdul Hakim Mohammed Center for Real Estate Studies, Faculty of Geoinformation and Real Estate, Universiti Teknologi Malaysia
  • Gunavathy Kanniyapan Center for Real Estate Studies, Faculty of Geoinformation and Real Estate, Universiti Teknologi Malaysia

DOI:

https://doi.org/10.11113/jt.v75.5270

Keywords:

Facility management, sustainable building facilities, sustainability, design management

Abstract

Incorporating facility management (FM) knowledge in the building design is essential to increase overall performance of building including quality and cost as; the management and operation process of facilities can have a significant impact on energy, cost, health and safety, and quality. As a result, a more efficient and sustainable facility will be turn over during the post occupancy stage. Thus, this paper explores the consideration of FM during design stage and its influence on achieving sustainability of building facilities in post occupancy phase, and subsequently identifies a set of criteria to evaluate the potential of FM to achieve sustainability of building facilities. A critical review of the literature has been carried out for the purpose of identifying the said variables. Literature review reveals that there is a need to review FM potential of the design during the design phase; mainly due to increased life cycle cost, environmental impact, impact on health and safety and quality of the building facilities during the service life. This paper aims to address the long pending quest of poor awareness of the FM function among the designers and forms the basis for achieving FM sustainability of building facilities. 

References

Che-Ani, A. I., Chohan, A. H., Goh, N. A., Tahir, M. M., Surat, M., and Usman, I. M. S. 2009. Sustainability Design Formulation in Achieving Best Practice of Building Maintenance. World Academy of Science, Engineering and Techonology. 1156-1160.

Alhaji, M. and. Hassanain, M. 2010. Towards Improvement in Facilities Operation and Maintenance Through Feedback to the Design Team. Journal of Built and Human Environment Review. 3(1): 72-87.

Forsberg, A. and Von Malmborg, F. 2004. Tools for Environmental Assessment of the Built Environment. Journal of Building and Environment. 39(1): 223–228.

Karol, E. and J, Brunner. 2009. Tools for Measuring Progress towards Sustainable Neighborhood Environments. Journal of Sustainability. 1(9): 612-627. Available From: www.mdpi.com/journal/sustainability.

Šeduikyte, L. and Bliudžius, R. 2005. Pollutants Emission from Building Materials and Their Influence on Indoor Air Quality and People Performance in Offices. Journal of Civil Engineering and Management. 11(2): 137-144.

McCreadie, M. 2006. Assessment of Sustainability Tools. Building Research Establishment. University of Dundee: Dundee, Scotland.

Xing, Y. et al. 2007. A Framework Model for Assessing Sustainability Impacts of a Built Environment. Glasgow, International Conference on Whole Life Urban Sustainability and its Assessment. 1-23.

Yigitcanlar, T., Fabian, L., Coiacetto, E. 2008. Challenges to Urban Transport Sustainability and Smart Transport in a Tourist City: The Gold Coast, Australia. Open Transport. J.

Teriman, S., Yigitcanlar, T., Mayere, S. 2009. Urban Sustainability and Growth Management in South-East Asian City-Regions: The Case of Kuala Lumpur and Hong Kong. Plan. Malays. 7: 47-68.

Mickaitytë, A., Zavadskas, E. K., Kaklauskas, A. and Tupënaitë, L. 2008. The Concept Model of Sustainable Buildings Refurbishment. International Journal of Strategic Property Management. 1(12): 53-68.

Edwards, B. 2005. Book of; Rough Guide to Sustainability. 2nd edition. London: RIBA Enterprise. 1-29.

Department for Trade and Industry. 2009. Strategy for Sustainable Construction: Facilities Management, DTI Consultation Events, Department for Trade and Industry, London.

Banaitiene, N., Banaitis, A., Kaklauskas, A., and Zavadskas, E. 2008. Evaluating the Life Cycle of a Building: A Multivariant and Multiple Criteria Approach. Journal of Management Science. 36(1): 429-441.

Arditi, D., and Nawakorawit, M. 1999a. Designing Buildings for Maintenance: Designers’ Perspective. Journal of Architecture Engineering. 5(4): 107-116.

Arditi, D. and Nawakorawit, M. 1999b. Issues in Buildings Maintenance: Property Managers’ Perspective. Journal of Architecture Engineering. 5(4): 117-131.

British Institute of Facilties Management (BIFM). 2007. What is Facility Management? Available From: http://www.bifm.org.uk/bifm/home. [Acessed: December 2011].

Al-Shiha, M., M. 1993. The Effects of Faulty Design and Construction on Building Maintenance. King Fahd university of Petroleum and Minerals: Msc. Thesis.

Lam, K. C. 2000. Quality Assurance System for Quality Building Services Maintenance. Building Services Engineering Department, Hong Kong Polytechnic University.

Dunston, P. S. and Williamson, C. E. 1999. Incorporating Maintainability in Constructability Review Process. Journal of Management in Engineering. 15(5): 56-60.

Helen S. Ng and L. Soibelman. 2003. Knowledge Discovery in Maintenance Databases: Enhancing the Maintainability in Higher Education Facilities. Construction Research Congress—Winds of Change: Integration and Innovation of Construction Proceedings of Construction Research Congress. Urbana Champaign: American Society of Civil Engineering (ASCE). 1-9.

Carpenter, D. and Meehan, B. 2002. Mainstreaming Environmental Management. International Journal of Sustainability in Higher Education. 3(1): 19-37.

Elmualim, A., Shockley, D., Valle, R., Ludlow, G. and Shah, S. 2010. Barriers and Commitment of Facilities Management Profession to the Sustainability Agenda. Journal of Building and Environment. 45(1): 58-64.

Moller, S. and Daniellle McCartney. 2007. Facilities Management and Maintenance and Sustainable Commercial Building. Article from Your Building.

Nutt, B. and McLennan, P. eds. 2000. Facility Management—Risks and Opportunities. Blackwell, Oxford, U.K.

British Standards, EN 13306:2010. 2010. Maintenance. Maintenance Terminology. British adopted European Standard.

International Development Research Center (IDRC). 1997. Strategic Framework 1997.

Vanegas, J. A. and Martin, A. A. (Editor). 2006. Engineering Sustainable Facilities. Journal of Sustainability Science and Engineering: Defining principles. Chapter 19: 387-409.

Hodges, C., CFM, LEED AP, IFMA Fellow. 2009. Sustainability “How-To Guide†Series. IFMA Foundation USA. Construction; Dutch lessons. Journal of Housing and The Built Environment. 111126.

Barton, H. 2005. A Health Map for Human Settlements. Built Environment. 31(4): 339-355.

Boston University. 2011. Sustainability. Available From: http://www.bu.edu/sustainability/administration/copyright/ [Accessed: January 2012].

Olson and Kellum. 2003. The Impact of Sustainable Buildings on Educational Achievements in K-12 Schools. Leonardo Academy Cleaner and Greener Program Report, November 2003. Leonardo Academy Inc.

Organization for Economic, Co-operation and Development. (OECD). 2004. Measuring Sustainable Development–Integrated with Environmental, Economic and Social Frameworks.

VROM (Ministry of Housing, Spatial Planning, and the Environment). 2005. (14 -15 March 2005). Sustainable Refurbishment of High-Rise Residential Buildings and Restructuring of Surrounding Areas in Europe. Report for European Housing Ministers‟ Conference held in Prague, Czech Republic.

Queensland Development Code Mandatory Part. 2011. Sustainable Buildings Guideline: 4.1. A Guide to Assist Building Industry Professionals and Homeowners Comply with the Sustainable Buildings Code.

John. G., Croome D. C. and Jeronimidis G. 2005. Sustainable Building Solutions: A Review of Lessons from the Natural World. Journal of Build and Environment. 40(3): 317-326.

Klunder, G. 2004. The Search for The Most Eco-efficient Strategies for Sustainable. Journal of Housing and the Built Environment. 19(1): 111-126.

Baldwin, R. 1996. Environmental Assessment and Management of Buildings. In: Proceedings of the International CIB TG8 Workshop, Building and Environment in Central and Eastern Europe, Warsaw.

Sapp, D. 2009. Facilities Operation and Maintenance. Whole Building Design Guide, National Institute of Building Sciences, Washington, DC., USA.

Liu, Y. 2006. A Forecasting Model for Maintenance and Repair Costs for Office Building. Concordia University, Canada: Msc. Thesis.

Ramly, A. 2006. Building Maintenance Management–Principe and Practices. Selangor: Pustaka Ilmi. 1-265.

Al-Hammad, A., Assaf, S. and Al-Shihah, M. 1997. The Effect of Faulty Design on Building Maintenance. Journal of Quality Maintenance Engineering. 3(1): 29–39.

Lee, J. H. 1996. Statistical Deterioration Models For Condition Assessment of Older Buildings. PhD Thesis, Wayne State University, Detroi.

Whole Building Design Guide (WBDG) Sustainable Committee. 2014. Optimize Operational and Maintenance Practice. Available at: http://www.wbdg.org/design/optimize_om.php [Accessed: 19 May 2015].

Chew, M. Y. L., Tan, S. S., and Kang, K. H. 2005. Contribution Analysis of Maintainability Factors For Cladding Facades. Architectural Science Review. 48(3): 215-228.

Silva, N., Dulaimi, M.F., Ling, F.Y.Y. and Ofori, G. 2004. Improving the maintainability of buildings in Singapore. Building and Environment. 39(1): 1243-1251.

Chew, M. L., Das, S. and Sulaiman, N. H. B. 2008. Quantifying Maintainability Parameters for Vertical Transport System. In 11th International Conference on Durability of Building Materials & Components, Istanbul, Turkey, Istanbul Technical University, 2008. 11-14.

Soronis, G. 1992. An Approach to the Selection of Roofing Materials for Durability. Journal of Construction and Building Materials. 6(1): 9-14.

Facility Management Association of Australia. Available from: http://www.fma.com.au/cms/index.php. [Accessed: January 2014].

Klammt, F. (Principle) & Teicholz, E. (Editor). 2001. Facility Design and Management Handbook. United States: MCGraw-Hill.

Kim, J., J and Rigdon, B. 1998. Sustainable Architecture Module: Introduction to Sustainable Design. Published by National Pollution Prevention Center for Higher education. 1-41. Available From: www.umich.edu/~nppcpub/1. [Accessed: December 2011].

Gething, B., and B. Bordass. 2006. Rapid Assessment Checklist for Sustainable Buildings. [Accessed: January 2012].

William McDonough and Partners. 1992. The Hannover Principles: Design for Sustainability The Hannover Principles: Design for Sustainability. Available From: http://www.mcdonough.com/speaking-writing/the-hannover-principles-design-for-sustainability/#.VVsYBfmqqko. [Accessed: December 2011].

Makenya, A. R. and Soronis. 1999. G. Designing for Sustainable Buildings in Developing Countries–Problems and Priorites. 8DBMC–Proceedings of the 8th International Conference on Durability of Building Materials and Components. Vancouver, May 30–June 3. Canada: KTH-Royal Institute of Technology. 2050-2056.

Mackinlay, M. 2009. Adjunct Professor of Project Management ESC Lille. Presentation on Sustainability in Project Management on Nov 27, 2009. 10th PMI Benelux day.

Ganisen, G., Mohammed, A. H, Nesan, L. J and Kanniyapn, G. 2015. Critical Success Factors for Low Cost Housing Building Maintenance Organization. Journal Teknologi (science & Engineering). 74(2): 31-40.

Rittel, H., 1968. Lectures Notes for Architecture 130, Unpublished, Department of Architecture, Univesity of California, Berkeley, CA.

Balakrishnan, J., Cheng, C. H. 2007. Multi-period Planning and Uncertainty Issues in Cellular Manufacturing: A Review and Future Directions. European Journal of Operational Research..177: 281-309.

Dwijayanti, K., Dawal, S.Z., Jamasri and Aoyama., H. 2010. A Proposed Study on Facility Planning and Design in Manufacturing Process. Proceeding of International MultiConference of Engineers and Computer Scientist 2010, Vol III, IMECS 2010, March 17-19, 2010, Hong Kong.

Diaz, A. G., and Smith, J. M. 2008. Facilities Planning and Design. United States of America: Pearson Prentice Hall. 1-27.

Miles, D. and Syaaga, P. 1987. Building Maintenance: A Management Manual. Intermediate Technology puh.

Diaz, A. G., and Smith, J. M. 2008. Facilities Planning and Design. United States of America: Pearson Prentice Hall. 1-27.

Whole Building Design Guide (WBDG) Sustainable Committee. 2011. Occupants Safety and Health. National Institute of Building Science. Available From: www.wbdg.org/design/ensure_health.php. [Accessed: December 2011].

The Work Health and Safety Act 2011. 2011. An Act Relating to Work Health and Safety, and for Related Purposes. Australia. 1-146.

Hodges, C., CFM, LEED AP, IFMA Fellow. 2009. Sustainability “How-To Guide†Series. IFMA Foundation USA. Construction; Dutch Lessons. Journal of Housing and The Built Environment. 111126.

Coleman Engineering. 2010. Inc, in Collaboration with G.D. Longwell–Architects, PLLC. Wyoming School Facilities Commission School Design Guidelines.

Downloads

Published

2015-08-25

How to Cite

FACILITY MANAGEMENT VARIABLES THAT INFLUENCE SUSTAINABILITY OF BUILDING FACILITIES. (2015). Jurnal Teknologi, 75(10). https://doi.org/10.11113/jt.v75.5270