ANALYSIS OF THERMAL EFFICIENCY OF OPEN CYCLE GAS TURBINE POWER PLANT AT PUTRAJAYA (MALAYSIA)

Authors

  • Alhassan Salami Tijani Faculty of Mechanical Engineering, University Teknologi MARA (Shah Alam), Selangor, 40450 Shah Alam, Malaysia
  • Mohd Rashid Halim Faculty of Mechanical Engineering, University Teknologi MARA (Shah Alam), Selangor, 40450 Shah Alam, Malaysia

DOI:

https://doi.org/10.11113/jt.v76.5532

Keywords:

Power generation, gas power cycle, regenerative, thermal efficiency, thermodynamic analysis

Abstract

The purpose of this paper is to study the performance of an existing open cycle gas turbine power plant at Putrajaya power station. At compressor inlet temperature of 298.90K, thermal efficiency of 31 % was observed for the existing or current cycle whiles the modified configuration yielded thermal efficiency of 45 %, this result in 14 % increase in thermal efficiency. At pressure ratio of 3.67, thermal efficiency of about 31.06% and 44% was recorded for the current cycle and regenerative cycle respectively. The efficiency of both cycles increase considerably with increase in pressure ratio, but at pressure ratio of about 7, only a small increase in efficiency for both cycles was observed. The optimum value of the efficiencies for both cycles that correspond to pressure ratio of 7 is 43.06 and 56% for the current cycle and the regenerative cycle respectively.

References

P.K. Nag. 2008. Power Plant Engineering. New Delhi: Tata McGraw Hill Publishing Company Limited.

Farzaneh-Gord, M. and Deymi-Dashtebayaz, M. 2009. A New Approach for Enhancing Performance of a Gas Turbine (Case Study: Khangiran Refinery). Applied Energy. 86: 2750-2759.

H. Saravanamuttoo, G. Rogers, H. Cohen, and P. Straznicky. 2009. Gas Turbine Theory. England: Prentice Hall.

M. J. Moran, and H. N. Shapiro. 2008. Fundamentals of Engineering Thermodynamics. New York: John Wiley & Sons, INC.

Zhang, W., Chen, L. and Sun, F. 2009. Power and Efficiency Optimization for Combined Brayton and Inverse Brayton Cycles. Applied Thermal Engineering. 29: 2885-2894.

Sanjay, A. Mukul., Rajay. 2009. Energy and Exergy Analysis of Brayton-Diesel Cycle. Proceedings of the World Congress on Engineering 2009. II, July 1 - 3, 2009, London, U.K.

Ziviani, D., Beyene, A. and Venturini, M. 2014. Advances and Challenges in ORC Systems Modeling for Low Grade Thermal Energy Recovery. Applied Energy. 121: 79-95.

Durmusoglu, Y. and Ust, Y. 2014. Thermodynamic Optimization of an Irreversible Regenerative Closed Brayton Cycle Based on Thermoeconomic Performance Criterion. Applied Mathematical Modelling. 38: 5174-5186.

Toffolo, A. Lazzaretto, G. Manente, and M. Paci. 2014. A Multi-criteria Approach for the Optimal Selection of Working Fluid and Design Parameters in Organic Rankine Cycle Systems. Applied Energy. 121: 219-232.

Lee, S., Langston and George Opdyke Jr. 1997. Introduction to Gas Turbines for Non-Engineers. Published in the Global Gas Turbine News. 37( 2).

A. Yunus, Cengel, Michael A. Boles. 2014. Thermodynamics-An Engineering Approach. 8th Edition. McGraw-Hill.

Downloads

Published

2015-09-14

Issue

Section

Science and Engineering

How to Cite

ANALYSIS OF THERMAL EFFICIENCY OF OPEN CYCLE GAS TURBINE POWER PLANT AT PUTRAJAYA (MALAYSIA). (2015). Jurnal Teknologi (Sciences & Engineering), 76(5). https://doi.org/10.11113/jt.v76.5532