DESIGN AND DEVELOPMENT OF USED AL-QURAN PAPER DISPOSAL SYSTEM
DOI:
https://doi.org/10.11113/jt.v76.5669Keywords:
Incinerator, Quran paper, paper, dispose.Abstract
The idea of this project was to design and fabricate a combustion chamber of incinerator for Quran paper burning with a capacity of 10 kg/h, which is heated by Liquefied Petroleum Gas, LPG as fuel for the burner. This small capacity 10kg/h incinerator is portable type. The focus customers are Department of Islamic Development, Malaysia, JAKIM and other Islamic authority in Malaysia that can dispose the Quran used paper with their own facility without sending out to third parties. The customer can reduce space, cost and time because the storage and transport are not required. This incinerator is a retort type consist of primary and secondary chambers. The secondary chamber is further divided into mixing and combustion sections . The function of secondary chamber is to provide complete combustion to Quran paper burning process. The temperature for primary chamber is set of range from 200 to 218 degree Celsius. This design is fabricated based on standard stated by Environment Authority.References
Guideline On Manufacturing, Handling, Selling and Disposing Of Publishing and Decorative Materials Which Contain Quranic Verses. 2007. Department of Islamic Development Malaysia, JAKIM, Which Contain Quranic Verses: Second Edition.
Criteria for Incinerator Design and Operation. 1974. Ministry of the Environment Ontario, Canada.
Wildrem. 1994. Wet Scrubber In Incineration. 5.4-4 - 5.4-5.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.