ERGONOMIC IMPROVEMENTS IN THE HANDLING OF FIBRE INSULATOR SHEETS CUTTING
DOI:
https://doi.org/10.11113/jt.v76.5907Keywords:
Ergonomics intervention, direct observation, participative assessment, work-related musculoskeletal disorder (WMSDAbstract
This paper gives emphasis to an ergonomics study conducted in a fibre insulation bay of a medium-sized air handler manufacturing plant. Work-related musculoskeletal disorders and other health problems in the fibre insulator sheets cutting operations were closely looked into. Unstructured interviews were initially conducted to uncover the underlying problems, while Direct Observation (DO) and Participative Assessment (PA) methods were utilized to identify ergonomics risk factors. Ergonomics interventions by means of real life experiments were implemented. These included 1) providing semi leather gloves to replace cotton hand gloves, 2) providing plastic chairs with back rest for occasional sitting, and 3) installing a fiberglass rolling mechanism for fiberglass cutting on table top. Post survey incorporating both DO and PA methods was subsequently conducted to gauge its effectiveness in minimizing work-related musculoskeletal disorders and other health problems. This action-oriented study finally produced fruitful results which includedinsignificant low back pain and legs ache, minimized hand irritation sensations, relieved tiredness of operators, reduced nose irritation, eye itchiness, sore throat and dizziness.Â
References
Abrahamsson, L. 2000. Production Economics Analysis Of Investment Initiated To Improve Working Environment. Applied Ergonomics. 31: 1-7.
Li, G., and Oliver, S. 2000. The Effect of Electronic Map Complexity and Orientation on Driver Response Time And Error Rate For Road Identification. In D. de Waard, C. Weikert, J. Hoonhout, and J. Ramaekers, (Eds.) Human-System Interaction: Education, Research and Application in the 21st Century.Shaker Publishing B. V., Maastricht.293-302.
Li, G., and Oliver, S. 2000. Design Factors Of In-Vehicle Information Display For Efficient Road Recognition. The Proceedings of the Human Performance, Situation Awareness and Automation: User-Centered Design for the New Millennium. Savannah, Georgia.
Alipour, A., Dashti, H., and Tabibi, M. 2002. An Ergonomic Intervention Programme in the Largest Iranian Auto-Making Industry: Methodology and Experience. Proceedings of 3rdCybErg 2002: The Third International Cyberspace Conference in Ergonomics, 2002. The International Ergonomics, Johannesburg, South Africa.
Trachtman Doris 2002. Passenger-Side Rear-View Mirrors: Driver Behaviour and Safety. Proceedings of 3rdCybErg 2002: The Third International Cyberspace Conference on Ergonomics, 2002.
Sen, R. N., and Suribhotla, V. 2003. Ergonomic Improvements for the Maintenance of The Passenger Buses Through Innovative Retrieval Of The Components. In Khalid, H. M., Lim, T. Y., and Lee, N. K. (Eds.). Proceedings of 7th South East Asian Ergonomics Society and 4th Malaysian Ergonomics Conference (SEAMEC).Kuching, Sarawak. 19-22 May 2003.
Sen. R.N., and Yeow, H.P. 2003. Ergonomic Weighted Scores to Evaluate Critical Instructions for Improvements in a Printed Circuit Assembly Factory. Human Factors and Ergonomics in Manufacturing. 13: 1-17.
Sen, R. N., and Yeow, P. H. P. 2003. Ergonomic Study on the Manual Component Insertion Lines for Occupational Health and Safety Improvements.International Journal of Occupational Safety and Ergonomics. 9:55-72.
Sen, R. N., and Yeow, P. H. P. 2003. Cost Effectiveness of Ergonomic Redesign of Electronic Motherboard. Applied Ergonomics. 34:453-463.
Loo, H. S., and Yeow, P. H. P. 2007. Ergonomics Intervention in the Manufacturing of Air Handler Coil Assembly. Proceedings of the International Conference on Ergonomics 2007. Hotel Istana, Kuala Lumpur, Malaysia. 3-5 December2007. 324-328.
Loo, H. S., and Yeow, P. H. P. 2008. Ergonomic Redesign of Air Handler Coil for Effective Maintenance. Invention, Innovation and Design 2008 (IID 2008).UiTM, Shah Alam, Malaysia.25-27 March 2008.
Loo, H. S., and Yeow, P. H. P. 2008. Ergonomic Redesign of Cooling Coil Assembly. 19th International Invention, Innovation & Technology Exhibition (ITEX 2008). Kuala Lumpur, Malaysia.9-11 May2008.
Loo, H. S., and Yeow, P. H. P. 2008. Ergonomics Improvements in the Brazing Of Air Handler Coil Assembly.Proceedings of the 9 Southeast Asian Ergonomics Society Conference (SEAES 2008).Grand Mercule Fortune Bangkok, Thailand.22-24 October 2008. A003.
Loo, H. S., and Yeow, P. H. P. 2008. Cooling Coil Assembly Redesigned For Ergonomic Improvements. 57th World Exhibition on Innovation, Research and New Technologies. Brussels, Belgium. 13-15 November 2008.
Loo, H. S., and Yeow, P. H. P. 2009. Ergonomic Redesign Options for Air Handler Coil Replacement.Invention, Innovation and Design 2009 (IID 2009). UiTM, Shah Alam, Malaysia.13-15 January 2009.
Loo, H. S., and Yeow, P. H. P. 2009. Options in Ergonomic Redesign for Air Handler Coil Replacement. Malaysia Technology Expo 2009 (MTE 2009). Kuala Lumpur, Malaysia.19-21 February, 2009.
Loo, H. S., Yeow, P. H. P. and Balakrishnan V. 2013. Low Cost Redesign of Coil Assemblies for Ergonomic Improvements. Journal of Mechanical Engineering (JMechE). 10(1): 35-47.
Loo, H. S., Saad, N. H. and M. Redza, M. R. 2014. Ergonomics Intervention in Steel Panels Handling For Improving Workers’ Well-Being Outcomes. Journal of Mechanical Engineering (JMechE). 11(2): 93-105.
Grandjean, E. 1982. Fitting The Task To The Man: An Ergonomic Approach (4th Ed.). Taylor & Francis, London.
Konz, S. 1983. Work Design Industrial Ergonomics (2nd edition). Columbus, OH: Grid.
Sanders, M. S., and McCormick, E. J. 1993. Human Factors in Engineering and Design (7th edition). New York: McGraw-Hill.
Yeow, P. H. P., and Loo, H. S. 2009. Ergonomics in the Brazing Operation Of An Air Handler Coil Factory. Proceedings of the 2nd International Conference on Industrial Risk Engineering (CIRI 2009). Reims, France.13-15 May 2009.CIRI043.
Sinclair, M. A. 2005. Participative Assessment. In Wilson, J. R., Corlett, E. N. (Eds.), Evaluation of Human Work (3rded.). Taylor & Francis, London. 83-111.
Bisantz, A. M., and Drury, C. G. 2005. Applications of Archival and Observational Data. In Wilson, J. R., Corlett, E. N. (Eds.), Evaluation of Human Work (3rded.). Taylor & Francis, London. 61-82
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
