ANALYSIS ON THE EFFECT OF DIELECTRIC MATERIAL AND COPPER THICKNESS OF SUBSTRATE TOWARDS THE PERFORMANCE OF ULTRA WIDEBAND GROUND-SLOTTED T-SHAPED POWER DIVIDER

Authors

  • Khairul Huda Yusof Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Norhudah Seman Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Mohd Haizal Jamaluddin Wireless Communication Centre (WCC), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v77.6277

Keywords:

Copper thickness, ground-slotted, power divider, T-shaped, substrate.

Abstract

Nowadays, the fifth generation (5G) wireless system is extensively studied to fulfill the continuously increasing demand for high data rate and mobility in wireless communication applications. Thus, to cope with this demand, various researches are required for front-end microwave components, which includes power divider. Therefore, in this article, the design and analysis of ultra wideband T-shaped power divider is presented. Two substrates are chosen in the design, which are Rogers RO4003C and TMM4 with copper thickness of 17 µm and 35 µm to analyze their effect towards ultra wideband performance of the designed power divider. The design and analysis are performed by using CST Microwave Studio. The optimal performance of the designed power divider is subjected to dielectric material and the copper thickness of the substrate. Where, the best design is obtained using TMM4 substrate that made of ceramic thermoset polymer with 35 µm copper thickness.

References

C. X. Wang, F. Haider, X. Gao, X. H. You, Y. Yang, D. Yuan, H. M. Aggoune, H. Haas, S. Fletcher and E. Hepsaydir. 2014. Cellular Architecture and Key Technologies for 5G Wireless Communication Networks. IEEE Communications Magazine. 52(2): 122-130.

J. Stewart. 5G Will Require New As Well As Established Spectrum Bands, But The Availability of New Bands Is Not Confirmed.[Online].Available:http://www.analysysmason.com/About-Us/News/Newsletter/5G-spectrum-Oct2014. [Accessed: 9 August 2015].

The Office of Communications. 2015. Spectrum Above 6 Ghz For Future Mobile Communications.

J. C. Chiu, J. M. Lin and Y. H. Wang. 2006. A Novel Planar Three-Way Power Divider. IEEE Microwave and Wireless Components Letters. 16(8): 449-451.

L. Chang, C. Liao, L. L. Chen, W. B. Lin, X. Zheng and Y.-L. Wu. 2012. Design of an Ultra-Wideband Power Divider via the Coarse-Grained Parallel Microgenetic Algorithm. Progress In Electromagnetics Research.124: 425-440.

A. Abbosh, M. E. Bialkowski and J. Mazierska. 2006.An UWB Planar Out-Of-Phase Power Divider Employing Microstrip-Slot And Parallel Stripline-Microstrip Transitions, Asia-Pacific Microwave Conference. 905-908.

M. E. Bialkowski, N. Seman and M. S. Leong.2009. Design of a Compact Ultra Wideband 3 dB Microstrip-Slot Coupler with High Return Losses and Isolation. Asia Pacific Microwave Conference. 1334 – 1337.

M. E. Bialkowski and Y. Wang. 2010. Wideband Microstrip 180º Hybrid Utilizing Ground Slots. IEEE Microwave and Wireless Components Letters. 20(9): 495-497.

S. W. Wong and L. Zhu. 2008. Ultra-Wideband Power Divider with Good In-Band Splitting and Isolation Performances. IEEE Microwave and Wireless Components Letters. 18(8): 518-520.

L. Xiao, H. Peng and T. Yang. 2014. The Design of a Novel Compact Ultra-wideband (UWB) Power Divider. Progress In Electromagnetics Research Letters. 44: 43–46.

K. H. Yusof, N. Seman, M. H. Jamaluddin and D. N. A. Zaidel. 2015. Characterization and Formulation of Microstrip-Slot Impedance with different Thickness and Relative Permittivity. Applied Mechanics and Materials. 781: 53-56.

K. H. Yusof, N. Seman and M. H. Jamaluddin. 2015. Design of U-Shaped In-Phase Power Divider Employing Ground-Slotted Technique for Wideband Applications. Wireless Personal Communications. 81(1): 359-371.

R. Janaswamy and D. H. Schaubert. 1986. Characteristic Impedance of a Wide Slotline on Low-Permittivity Substrates.IEEE Transaction on Microwave Theory and Technique. MTT-34: 900-902.

D. M. Pozar. 2005. Microwave Engineering. 3rd Edition. New York; Wiley.

Downloads

Published

2015-11-16

Issue

Section

Science and Engineering

How to Cite

ANALYSIS ON THE EFFECT OF DIELECTRIC MATERIAL AND COPPER THICKNESS OF SUBSTRATE TOWARDS THE PERFORMANCE OF ULTRA WIDEBAND GROUND-SLOTTED T-SHAPED POWER DIVIDER. (2015). Jurnal Teknologi (Sciences & Engineering), 77(10). https://doi.org/10.11113/jt.v77.6277