SHEAR STRENGTH DEGRADATION OF SEMARANG BAWEN CLAY SHALE DUE TO WEATHERING PROCESS

Authors

  • Idrus M Alatas Institut Sains dan Teknologi Nasional, Jakarta, Indonesia
  • Samira A Kamaruddin UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia
  • Ramli Nazir Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Masyhur Irsyam Teknik Sipil Institut Teknologi Bandung, Bandung, Indonesia
  • Agus Himawan Teknik Sipil Institut Teknologi Bandung, Bandung, Indonesia

DOI:

https://doi.org/10.11113/jt.v77.6429

Keywords:

Clay Shale, weathering, shear strength, residual shear strength

Abstract

The effect of weathering processes in decreasing the shear strength of clay shale had been done in this study. The drying process of clay shale with sunlight in the laboratory up to 80 days had been conducted to create the conditions of weathered sample. The peak and residual shear strength parameters of unsaturated and saturated clay shale were obtained from triaxial laboratory test, and all samples were tested on each 8 days of weathering process. Decrease of shear strength in peak and residual condition was obtained during 80 days of the drying process. The residual shear strength parameters were distinguished between residual shear strength without stress release and with stress release of confining pressure. The results up to 80 days of unsaturated clay shale showed that the cohesion at peak stress conditions reduced to 30 % based on initial shear strength before the occurrence weathering, while the internal angle friction reduced to 64 %. Residual cohesion without and with stress release reduced to 4 % and 1 %, respectively while residual internal angle friction without and with stress release reduced to 15 % and 5 %. Similar situation also occurs for the saturated clay shale samples.

References

Irsyam M., Jayaputra. A. A., Himawan A. and Kartawiria A. 2011. Kasus-Kasus Kelongsoran Pada Tanah Clay Shale dan Alternatif Penanggulangannya. Proceeding of the 9th Indonesian Society for Geotechnical Engineers Conference and 15th Yearly Scientific Meeting.Jakarta .

Idrus M. A.2010. Soil Investigation Report : Pusdiklat Dan Sekolah Olah Raga Nasional, Hambalang, Sentul, Jawa Barat. in Final Report Soil Investigation. Geoinves Soil Mechanics Laboratory. Jakata.

Idrus M. A,. 2012. Geotechnical Engineering Aspect In Infrastructure Building On Difficulties Soil. C-Line Civil Eng Departement of ISTN.

LAPI ITB PT,. 2013. Alternatif Mitigasi Kelongsoran dan Perkuatan Lereng Galian Tower SUTT STA 19+255 Pembangunan Jalan Tol Semarang - Solo Tahap I Ruas Ungaran-Bawen Paket V Tinalun - Lemah Ireng STA 18+000 - 21+825. in Technical Report LAPI ITB PT.

Shakoor A., Tej. P.G. 2011. Assessing The Slaking Behaviour of Clay- Bearing Rock. 10th Annual Tecnical Forum Geohazards Impacting Transportation In The Appalachian Region. Columbus Ohio USA.

Nandi A. and Shakoor A. 2008. Application Of Logistic Regression Model For Slope Instability Prediction in Cuyahoga River Watershed, Ohio, USA. Georisk. 2(1): 16-27.

Sadisun I. A., Andri S. S, Asep N., and Prihananto S. 2006. Weathering Of Some Selected Rock Types And Their Strength Degradation Obtained From Schmidt Hammer. Proceeding PIT IAGI Riau, The 35th IAGI Annual Convention and Exhibition .Pekanbaru – Riau. 21 – 22 November 2006.

Sadisun I. A., Bandono H., Shimada, M., Ichinose, and Matsui K. 2010. Physical Disintegration Characterization of Mudrocks Subjected to Slaking Exposure and Immersion Tests. Jurnal Geologi Indonesia. 5 (4). Desember 2010: 219-225.

Sadisun I. A., Bandono H., Shimada, M., Ichinose, and Matsui K. 2004. Textural And Mineralogical Properties Of Argillaceous Rocks In Relation To Their Propensity To Slaking. Engineering Geology for Sustainable Development in Mountainous Areas, Free & Aydin (eds) © 2004 Geological Society of Hong Kong. ISBN 962 7320 07 2.

Timothy D. S., Duncan., and Michael,. 1991. Mechanisms of strength loss in stiff clays. Journal of Geotechnical Engineering. 117(1): 139-154.

Gartung E. 1986. Excavation of The Hard Clays of The Keuper Formation. Proceeding of Symposium Geotechnical Engineering Divission. Seatle, Washington.

Sadisun Sadisun I. A., Shimada M., Ichinose M., and Matsui K. 2005. Study On The Physical Disintegration Characteristics Of Subang Claystone Subjected To A Modified Slaking Index Test. Geotechnical and Geological Engineering . 23: 199–218.

Sadisun I. A., Shimada M., Ichinose M., and Matsui K. 2002. An Experimental Study Of Swelling Strain In Some Argillaceous Rocks By Means Of An Improvedunconfined Swelling Test. Rock Engineering Problems and Approches in Underground Constuction. Choi, Ryu, Jeon & Moon (eds).

Emberhardt E., Thuro K., and Luginbueh M. 2004. Slope Instability Mechanisms in dipping interbedded conglomerates and weathered marls- The 99 Rufi landslide Switzerland. Engineering Geology. 77: 35-56.

SEM and XRD Lemigas Laboratory. 2015. Report for Semarang-Bawen and Hambalang Clay Shale. LEMIGAS: Jakarta.

ASTM D 2850-87. 1989. Unconsolidated Undrained Compressive Strength of Cohessive Soil in Triaxial Compression, in Annual Book of ASTM Standard.

Ho D.Y.F, Fredlund .D.E. 1982.A Multistage Trixial Test For Unsaturated Soils. Geotechnical Testing Journal. GTJODJ.5 (1/2):18-25.

Goodman R E. 1989. Intoduction to Rock Mechanics. Second Edition. Canada: John Wiley & Sons.

Patton F. D. 1966. Multiple Modes Of Shear Failure In Rock. Proceeding 1st Congress ISRM (Lisbon). 1: 509-513.

Downloads

Published

2015-11-23

Issue

Section

Science and Engineering

How to Cite

SHEAR STRENGTH DEGRADATION OF SEMARANG BAWEN CLAY SHALE DUE TO WEATHERING PROCESS. (2015). Jurnal Teknologi, 77(11). https://doi.org/10.11113/jt.v77.6429