THE EFFECTS ON SWAY ANGLE PERFORMANCE IN GANTRY CRANE SYSTEM BY USING PSD ANALYSIS
DOI:
https://doi.org/10.11113/jt.v77.6618Keywords:
Gantry Crane System, Power Spectral Density, sway angle, bang-bang input, dynamic modeling.Abstract
Gantry Crane is also known as an overhead crane and widely used in industries, constructions or shipyards due to limited human capability to carry the various types of load. This system is developed to load and unload heavy materials from one place to another desired location. The problem is frequently occurs when the crane has to move the load at the required position while minimizing the sway angle of the oscillation. Thus, this research presents the investigation of the 2-D Gantry Crane System which focuses on the sway angle characteristics via Power Spectral Density (PSD) analysis. The mathematical dynamic model of the Gantry Crane System is developed using the Lagrange Equation. The system is simulated in MATLAB/Simulink environment and the results are presented in the form of time and frequency domain. A comparative assessment of the various payload mass and rope length of the system performance is presented and discussed.
References
Jaafar, H. I., Mohamed, Z., Abidin, A. F. Z., and Ghani, Z. A. 2013. “PSO-tuned PID controller for a Nonlinear Gantry Crane System,†Proc. - 2012 IEEE Int. Conf. Control Syst. Comput. Eng. ICCSCE 2012. 515–519,
Xiao, Y., and Weiyao, L. 2012. “Optimal Composite Nonlinear Feedback Control for a Gantry Crane System,†Control Conference (CCC), 2012 31st Chinese. 601–606,
Ahmad, M. A., Ishak, H., Nasir, A. N. K., and Ramli, M. S. 2009. “Comparison of Active Sway Control of a Gantry Crane System,†Proc. - 2009 3rd Asia Int. Conf. Model. Simulation, AMS 2009. 431–435
Diep, D. V., and Khoa, V. V. “PID-Controllers Tuning Optimization with PSO Algorithm for Nonlinear Gantry Crane System,†Int. J. Eng. Comput. Sci. 3(6): 6631–6635, 2014.
Hussien, S. Y. S., Jaafar, H. I., Ghazali, R., and Razif, N. R. A. 2015. “The Effects of Auto-Tuned Method in PID and PD Control Scheme for Gantry Crane System,â€. 6: 121–125
Maghsoudi, M. J.. Mohammed, Z., Pratiwi, A. F., Ahmad, N., and Husain, A. R. “An Experiment for Position and Sway Control of a 3D Gantry Crane,†in ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings, 2012. 2: 497–502.
Majid, M. A., Ibrahim, W. S. W., Mohamad, S., Bakar, Z. A., and Samarahan, K. 2013. “A Comparison of PID and PD Controller with Input Shaping Technique for 3D Gantry Crane,†IEEE Conf. Syst. Process Control, no. December. 13–15,
Wu, Z., Xia, X., and Zhu, B. “Model Predictive Control for Improving Operational Efficiency of Overhead Cranes.â€
Singhose, W., Porter, L., Kenison, M. and Kriikku, E. 2000. “Effects of Hoisting on the Input Shaping Control of Gantry Cranes,†Control Eng. Pract. 8: 1159–1165
Sorensen, K., Singhose, W., and Dickerson, S. 2005. “A Controller Enabling Precise Positioning and Sway Reduction in Cranes with On-Off Actuation,†IFAC Proc. 16: 580–585
Yang, J. H. and Yang, K. S. 2007. “Adaptive Coupling Control for Overhead Crane Systems,†Mechatronics. 17: 143–152
Jaafar, H. I., Mohamed, Z., Jamian, J. J., Abidin, A. M. Kassim, A. F. Z., and Ghani, Z. A. 2013. “Dynamic Behaviour of a Nonlinear Gantry Crane System,†Procedia Technol. 11(Iceei): 419–425
Solihin, M. I., Wahyudi, M., Kamal, A S., and Legowo, A. 2008. “Optimal PID Controller Tuning of Automatic Gantry Crane using PSO Algorithm,†Proceeding 5th Int. Symp. Mechatronics its Appl. ISMA 2008. 25–29
Ahmad, M. A., Nasir, A. N. K., Najib, M. S., and Ishak, H. 2009 “Anti-sway Techniques in Feedback Control Loop of a Gantry Crane System: A Comparative Assessment of PD and PD-type Fuzzy Logic Controller,†in 2009 4th IEEE Conference on Industrial Electronics and Applications (ICIEA 2009). 2483–2487.
Gaiceanu, M., and Stan, F. 2010 “Motion Control of a Single-beam Gantry Crane Trolley,†in Proceedings - 3rd International Symposium on Electrical and Electronics Engineering, ISEEE 2010. 149–152.
Jaafar, H. I., Ali, N. M., Mohamed, Z., Selamat, N. A., Abidin, A. F. Z., Jamian, J. J., and Kasim, A. M. 2013. “Optimal Performance of a Nonlinear Gantry Crane System via Priority-based Fitness Scheme in Binary PSO Algorithm,†Proc. 5th Int. Conf. Mechatronics. 012011
Solihin, M. I. Wahyudi, Kamal, M. A. S., and Legowo, A. 2008. “Objective Function Selection Of GA-Based PID Control Optimization for Automatic Gantry Crane,†in Proceedings of the International Conference on Computer and Communication Engineering 2008, ICCCE08: Global Links for Human Development. 883–887.
Ahmad, M. A., Ismail, R. M. T. R., and Ramli, M. S. 2009. “Input Shaping Techniques for Anti-Sway Control of a 3-D Gantry Crane System,†2009 IEEE Int. Conf. Mechatronics Autom. ICMA 2009. Isiea: 2876–2881,
Yusop, A. M., Sulaiman, N. A., Khairuddin, and Mohamed, Z. 2009. “Vibration Control of a Gantry Crane System Using Inverse Dynamic Analyses,†J. Adv. Manuf. Technol. 3: 97–108
Ahmad, M. A., Misran, F. R., Ramli, M. S.,and Raja Ismail, R. M. T. 2010. “Experimental Investigations of Low Pass Filter Techniques for Sway Control of a Gantry Crane System,†2010 2nd Int. Conf. Electron. Comput. Technol. (ICECT 2010).1–4
Ismail, R. M. T. R., Ahmad, M. A., Ramli, M. S., and Rashidi, F. R. M. 2009. “Nonlinear dynamic modelling and Analysis of a 3-D Overhead Gantry Crane System with Payload Variation,†in EMS 2009 - UKSim 3rd European Modelling Symposium on Computer Modelling and Simulation. 350–354
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
