REDESIGNING EFFECT OF AUTO TAPING MACHINE SYSTEM IN SMALL PRODUCTION SCALE
DOI:
https://doi.org/10.11113/jt.v77.6657Keywords:
Automation, productivity, PLC, auto tapingAbstract
Productivity increase can be achieved by reducing the standard time that is used in a production process, especially due to human movement and by using an automation system. In this paper, changing the design and development of a semi-automation of Brother Hitap BT-61, a taping machine to become full-automation is presented by implementing the PLC and Electro Pneumatic system onto the mechanical system of feeding, taping, and pick up process. This research can contribute higher value added output, such as increase of productivity from 95.66% to 97.09%, reducing defects of sample products chassis RH that is used for revolving lights fabrication from 0.65% to 0.01%. Also, the system can avoid on-site working accident during machine operation. Based on the calculation of cost saving, the return of investment period of this research project is 8.5 months.Â
References
Zhong Z, Brandon K. C., Xinyu L, Yu Sun. 2010. Autonomous Robotic Pick and Place of Microobjects, IEEE Transcaction on Robotics. 26(1): 200-207
Mahmoud A. B., Osama M. A., Anas N. A., and Ahmad M. J. 2011. Petri Nets and Ladder Logic for Fully-automating and Programmable Logic Controller of Semi-Automatic Machines and Systems, American Journal of Engineering and Applied Sciences. 4(2): 252-264
Chengwang C., Jifei C., Yiming Y., and Shuqin W. 2011. Research on PLC-Based Pneumatic Controlling System of Flying Splicer of Web-Fed Offset Presses. The Open Mechanical Engineering Journal. 5: 160 – 165.
M. Tolouei-Rad, 2011. An intelligent Approach to high quantity automated machining. Journal of Achievment in Material and Manufacturing Engineering. 47(2): 195-204
Hugh Jack, 2002. Automating Manufacturing Systems with PLCs. USA: Free Software Foundation, Version 1.2,
Andrew Paar, 2003. Hidrolika Dan Pneumatika, Pedoman Untuk Teknisi Dan Insinyur. Jakarta, Indonesia: Erlangga Yogyakarta, Edisi kedua,
William Bolton, 2004. Programmable Logic Controller (PLC), Sebuah Pengantar. Jakarta, Indonesia: Erlangga, Edisi ketiga,
I. Setiawan. 2006. Programable Logic Control, Yogyakarta, Indonesia: Andi.
William D. C. 1993. Instrumentasi Elektronik dan Teknik Pengukuran, Jakarta: Erlangga,
Webster, J. G. 1999. The Measurement, Instrumentation and Sensors Handbook, New York:CRC Press.
Wilson, J. 2005. Sensor Technology Handbook. UK:Elsevier Inc.,
A. A. Akhmad, 2009. Perancangan Simulasi Sistem Pergerakan Dengan Pengontrolan Pneumatik Untuk Mesin Pengamplasan Kayu Otomatis, Jurnal Rekayasa Sriwijawa. 3(18): 22-23.
Qureshi, M. I., Rasli, A. M., Awan, U., Ma, J., Ali, G., Alam, A & Zaman, K. 2014. Environment and air pollution: health services bequeath to grotesque menace. Environmental Science and Pollution Research. 22(5): 3467-3476.
Qureshi, M. I., Khan, N. U., Rasli, A. M., & Zaman, K. 2015. The battle of health with environmental evils of Asian countries: promises to keep. Environmental Science and Pollution Research. 1-8.
Qureshi, M. I., Rasli, A. M., & Zaman, K. 2015. Energy crisis, greenhouse gas emissions and sectoral growth reforms: Repairing the fabricated mosaic. Journal of Cleaner Production
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
