SUSTAINABILITY: A NEW MANUFACTURING PARADIGM
DOI:
https://doi.org/10.11113/jt.v77.6661Keywords:
Lean manufacturing, social, environmental, manufacturing paradigm, green manufacturing, sustainable manufacturingAbstract
Recently, many industries adopted lean manufacturing philosophy to improve efficiency through reducing waste for maximization of profit. Most of the manufacturers have benefited the implementation of lean manufacturing through process effectiveness. However, despite of all its effectiveness in the production process, manufacturing industry is facing a real challenge instigated by the stakeholders (i.e. Customers, policy makers, regulatory authorities and society). Stakeholders are consistently pressurizing manufacturers to integrate the social and environmental factor within their production process to protect society and the environment from the negative effects of the manufacturing process, as a result manufacturing process experience continuous adaptation. This adaptation caused technological and procedural shifts, this significantly alter the fundamental manufacturing concepts. Current study provide the basic alterations in the fundamental principles of the green manufacturing paradigm, this adaptation ultimately leads to the new manufacturing paradigm of Sustainable manufacturing. Sustainable manufacturing is a broader concept of manufacturing focused on the integration of social, environmental and economic factors in manufacturing procedures.Â
References
Fullerton, R. R., Kennedy, F. A., and Widener, S. K. 2014. Lean manufacturing and firm performance: The incremental contribution of lean management accounting practices. Journal of Operations Management. 32(7): 414-428.
Ghosh, M. 2012. Lean manufacturing performance in Indian manufacturing plants. Journal of Manufacturing Technology Management. 24(1):113-122.
Ramesh, V., and Kodali, R. 2012. A decision framework for maximising lean manufacturing performance. International Journal of Production Research. 50(8): 2234-2251
Karim, A., and Arif-Uz-Zaman, K. 2013. A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations. Business Process Management Journal. 19(1): 169-196.
Agus, A., and Shukri Hajinoor, M. 2012. Lean production supply chain management as driver towards enhancing product quality and business performance: Case study of manufacturing companies in Malaysia. International Journal of Quality and Reliability Management. 29(1): 92-121.
Diaz-Elsayed, N., Jondral, A., Greinacher, S., Dornfeld, D., and Lanza, G. 2013. Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments. CIRP Annals-Manufacturing Technology. 62(1): 475-480
Deif, A. M. 2011. A system model for green manufacturing. Journal of Cleaner Production. 19(14): 1553-1559.
Haapala, K. R., Zhao, F., Camelio, J., Sutherland, J. W., Skerlos, S. J., Dornfeld, D. A., ... and Rickli, J. L. 2013. A review of engineering research in sustainable manufacturing. Journal Of Manufacturing Science And Engineering. 135(4): 1004-1013.
Kuhn, T. S. 1962. The Structure Of Scientific Revolutions. Chicago: University of Chicago Press.
Griffiths, B. 2012. Manufacturing paradigms: the role of standards in the past, the present and the future paradigm of sustainable manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 0954405412447695.
Lee, W.G.K. 2006. Baines T, Tjahjono B, et al. Towards a conceptual framework of manufacturing paradigms. SIMTech Reports. 7(3).
Nambiar AN. 2010. Modern manufacturing paradigms – a comparison. In: Proceedings Of The International Multiconference Of Engineers And Computer Scientists (IMECS 2010), Hong Kong. 17–19.
Zhang, A. 2014. Quality improvement through Poka–Yoke: from engineering design to information system design. International Journal of Six Sigma and Competitive Advantage. 8(2): 147-159.
Pentlicki, J. H. 2014. Barriers And Success Strategies For Sustainable Lean Manufacturing Implementation: A Qualitative Case Study. (Doctoral dissertation, University of Phoenix).
Monden, Y. 2011. Toyota Production System: An Integrated Approach To Just-In-Time. CRC Press.
Raja, M. I. 2011. Lean Manufacturing-An Integrated Socio-Technical Systems Approach To Work Design. (Doctoral dissertation, Clemson University).
Shah, R. and Ward, P. 2007. Defining and developing measures of lean production. Journal of Operations Management. 25: 785-805.
Bonavia, T., and Marin, J. 2006. An empirical study of lean production in the ceramic tile industry in Spain. International Journal Of Operations And Production Management. 26 (5): 505-531.
Li, S., Rao, S., Ragu-Nathan, T., and Ragu-Nathan, B. 2005. Development And Validation Of A Measurement Instrument For Studying Supply Chain Management Practices. Journal Of Operations Management. 23: 618-641.
Dennis, P. 2007. Lean Production Simplified, 2nd edition. New York, NY: Productivity Press.
Treville, S., and Antonakis, J. 2006. Could lean production job design be intrinsically motivating? Contexual, configural, level of analysis issues. Journal of Operations Management. 24: 99-123.
Hart, S. L. 1995. A natural-resource-based view of the firm. Academy of Management Review. 20(4): 986-1014.
Rogers, J. J., & Santosh, M. 2003. Supercontinents in Earth history. Gondwana Research. 6(3): 357-368.
Dornfeld, D., Yuan, C., Diaz, N., Zhang, T., & Vijayaraghavan, A. 2013. Introduction to Green manufacturing. Green Manufacturing. 1-23.
Shiino, J. 1999. Seventh report: Consider production system of architecture: Green manufacturing system. Architectural Product-Engineering. 401: 96-101.
Sangwan, K. S. 2006. Performance value analysis for justification of green manufacturing systems. Journal of Advanced Manufacturing Systems. 5(1): 59-73. http://dx.doi.org/10.1142/S0219686706000765
Chien, M. K., & Shih, L. H. 2007. An empirical study of the implementation of green supply chain management practices in the electrical and electronic industry and their relation to organizational performance. International Journal of Environment Science and Technology. 4(3): 383-394.
Polcari, M. R. 2007. A total approach to industry sustainability. Semiconductor International. 30(1): 108-108.
Sutor, L. 2007. Green manufacturing comes of age. Control Engineering. 54(11): 69-72.
Mittal, V. K., & Sangwan, K. S. 2014. Development of a model of barriers to environmentally conscious manufacturing implementation. International Journal of Production Research. 52(2): 584-594.
Tseng, M. L., Tan, R. R., & Siriban-Manalang, A. B. 2013. Sustainable consumption and production for Asia: sustainability through green design and practice. Journal of Cleaner Production. 40: 1-5.
Melnyk, S. A., & Smith, R. T. 1996. Green Manufacturing, Society for Manufacturing Engineering. Dearborn, MI.
Liu, F., Yin, J., Cao, H., & Yan, H. 2005. Investigations and practices on green manufacturing in machining systems. Journal of Central South University of Technology. 12(2): 18-24. http://dx.doi.org/10.1007/s11771-005-0004-2
He, Y., Liu, F., Cao, H., & Zhang, H. 2005. Process planning support system for green manufacturing and its application. Computer Integrated Manufacturing System: 11(7): 975-980.
Industrial Engineer. 2007. Sustainable Universe. Industrial Engineer. 39(12): 37-37.
Sangwan, K. S. 2006. Performance value analysis for justification of green manufacturing systems. Journal of Advanced Manufacturing Systems. 5(1): 59-73. http://dx.doi.org/10.1142/S0219686706000765
Glavic, P., & Lukman, R. 2007. Review of sustainability terms and their definitions. Journal of Cleaner Production. 15(18): 1875-1885. http://dx.doi.org/10.1016/j.jclepro.2006.12.006.
Qureshi, M. I., Rasli, A. M., Awan, U., Ma, J., Ali, G., Alam, A., & Zaman, K. 2014. Environment and air pollution: health services bequeath to grotesque menace. Environmental Science and Pollution Research. 22(5): 3467-3476.
Qureshi, M. I., Khan, N. U., Rasli, A. M., & Zaman, K. 2015. The battle of health with environmental evils of Asian countries: promises to keep.Environmental Science and Pollution Research. 1-8.
Qureshi, M. I., Rasli, A. M., & Zaman, K. 2015. Energy crisis, greenhouse gas emissions and sectoral growth reforms: Repairing the fabricated mosaic. Journal of Cleaner Production.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
