MICROCONTROLLER-BASED FOR SYSTEM IDENTIFICATION TOOLS USING LEAST SQUARE METHOD FOR RC CIRCUITS

Authors

  • Ang Jia Yi School of Mechatronic, Pauh Putra Campus, Universiti Malaysia Perlis, Arau, 02600, Perlis, Malaysia
  • M. S. Abdul Majid School of Mechatronic, Pauh Putra Campus, Universiti Malaysia Perlis, Arau, 02600, Perlis, Malaysia
  • Azuwir M. N. School of Mechatronic, Pauh Putra Campus, Universiti Malaysia Perlis, Arau, 02600, Perlis, Malaysia
  • S. Yaacob Universiti Kuala Lumpur, Malaysia Spanish Institute, Kulim Hi-Tech Park 09000, Kulim, Kedah, Malaysia

DOI:

https://doi.org/10.11113/jt.v77.6774

Keywords:

System Identification, Least Square Method, RC circuits

Abstract

System identification is one of the method to construct a plant mathematical model from experimental data. This method has been widely applied in the automatic control, aviation, spaceflight medicine, society economics and other fields more. With the rapid growth of the science and technology, the system identification technique has increasingly grown in various applications. Since most of the system identification devices are off-line base, this means that the system identification can only be done after collecting the data and process through a computer devices. This paper will show how to process system identification method with real-time system. This method required a microcontroller as the medium to perform. That’s why the system identification method will be programmed into a microcontroller, based on Least Square Method. Later, the system will be tested on a RC circuit to see the effect of the signal and the mathematical model obtained. The data will undergo the system identification toolbox for process using ARX and ARMAX model. On the other hand, the data will also be collected using the microcontroller created for analysis purpose. To ensure the validity of the model some verification methods are performed. Results show that the Least Square Method using Microcontroller base has the capability to work as a system identification tools.

References

Deng, X. 2009. System Identification Based on Particle Swarm Optimization Algorithm. International Conference on Computational Intelligence and Security. December 2009. 1: 259-263.

P.L. Li Fu. 2013. The Research Survey of System Identification Method. 2013 Fifth International Conference on Intelligent Human-Machine System and Cybernetics IEEE. 398-401.

H. Veenstra, 2004. 1-58 Gb/s PRBS Generator with < 1.1 ps RMS Jitter in InP Technology. In Solid-State Circuits Conference. Proceeding of the 30th European. September 2004: 359-362.

Perlman, M. 1970. The Decomposition of the States of a Linear Feedback Shift Register into Cycles of Equal Length. IEEE Transactions on Computers. 11: 1029-1035.

Zadeh, L. 1956. On the Identification Problem. IRE Transactions on Circuit Theory. 3(4): 277-281.

L. Ljung. 1998. System Identification Theory for the User. 2nd Ed. Linkoping Unversity Sweden. Prentice Hall, CA.

S. T. Soderstorm, P. 1998. System Identification. Prentice Hall.

Veretelnikova, E. L. 2004. Choice of Coefficient of Criterion of a Minimum of the Resulting Root-Mean-square Error for Linear Automatic Control Systems. 7th International Conference on Actual Problems of Electronic Instrument Engineering. September 2004: 203-204.

Downloads

Published

2015-12-16

Issue

Section

Science and Engineering

How to Cite

MICROCONTROLLER-BASED FOR SYSTEM IDENTIFICATION TOOLS USING LEAST SQUARE METHOD FOR RC CIRCUITS. (2015). Jurnal Teknologi (Sciences & Engineering), 77(28). https://doi.org/10.11113/jt.v77.6774