Stern Flap for Resistance Reduction of Planing Hull Craft: A Case Study with a Fast Crew Boat Model

Authors

  • Omar Yaakob
  • Suhaili Shamsuddin
  • Kho King Koh

DOI:

https://doi.org/10.11113/jt.v41.689

Abstract

Kajian terhadap pelbagai cara mengurangkan rintangan bot peronda telah dilakukan oleh ramai penyelidik. Kaedah yang dikaji termasuk penggunaan kepak buritan, baji buritan dan suntikan gelembung mikro. Walau bagaimanapun, disebabkan oleh sifatnya yang mudah dan praktikal, kepak buritan didapati amat berpotensi. Kertas kerja ini membentangkan kajian terhadap kesan kepak buritan terhadap prestasi rintangan bot kelasi berbentuk planing. Ujian model dijalankan bagi membuktikan keberkesanan kepak bagi mengurangkan rintangan. Lima kepak berlainan telah digunakan dalam rangka kajian sistematik bagi menentukan ciri geometrik optimum kepak buritan. Hasil ujian model menunjukkan empat kepak menambah rintangan kapal manakala kepak kelima pada sudut sifar mengurangkan rintangan sehingga 7.2 peratus pada 23 knots dan pengurangan purata sekitar 4.5 peratus. Pada 23 knots, pengurangan 8.2 peratus kuasa berkesan diperolehi. Kata kunci: Reka bentuk bot peronda, ujian model, pesawat laju The study on various methods of reducing the resistance of patrol craft have been carried out by many researchers. These methods included the application of stern flaps, stern wedges, and microbubble injection. However, due to its simplicity and practicality, stern flap is the most promising and cost effective method. The effect of a stern flap on the resistance performance of the planing hull crew boat is presented. Model tests were conducted to prove the effectiveness of the stern flap on reducing planing hull craft resistance. Five different stern flap designs were tested as part of systematic investigation to determine the optimum geometrical characteristics of the stern flap. Results of model resistance experiments showed that four of the flaps tested showed an increase in resistance while the flap at zero degree angle reduced the total resistance by 7.2 percent at 23 knots, and an average reduction rate of 4.5 percent. At 23 knots, an 8.2 percent reduction in effective power was predicted. Key words: Patrol boats design, model testing, fast craft

Downloads

Published

2012-02-25

Issue

Section

Science and Engineering

How to Cite

Stern Flap for Resistance Reduction of Planing Hull Craft: A Case Study with a Fast Crew Boat Model. (2012). Jurnal Teknologi, 41(1), 43–52. https://doi.org/10.11113/jt.v41.689