INNOVATION IN AGRICULTURAL SUPPORT ON SUSTAINABILITY FOR FRESH FRUIT BUNCH (FFB) OF ELAIS GUINEESIS IN MALAYSIA USING ARTIFICIAL DOMESTIC POLLINATION SYSTEM (ADOPSYâ„¢)

Authors

  • Zulkeflee Mohammad Department of Management of Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
  • Nor' Azizi Othman Department of Mechanical Precision Engineering Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
  • Nooh Abu Bakar Department of Management of Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
  • Hirofumi Hara Department of Environmental Engineering and Green Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
  • Zuriati Zakaria Department of Environmental Engineering and Green Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
  • Norio Sugiura Department of Environmental Engineering and Green Technology, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

DOI:

https://doi.org/10.11113/jt.v78.7296

Keywords:

Weevil, artificial pollination, male inflorescence, female inflorescence, abortion

Abstract

Sustainability of the Fresh Fruit Bunch (FBB) is one of the most important elements at the plantation level. Most of Oil Palm planters at this stage do not get the desired result of output production due to inconsistency of number of fresh fruit bunch on the plants. The main element to ensure plants producing FBB at a sustainable level is to keep the existence of the weevil for pollination. Nowadays it is hard to ensure the population of the weevil in right condition constantly due to misconduct of the biodiversity as well as ecosystem in the plantation areas. Weevil species (Elaeidodius kamerunicus) brought by an entomologist, Syed Anwar Rahman, from Cameroon to Malaysia managed to increase the number of fruit set in 1981. Hence, this research is carried out to determine the new method of pollination that should help planters to get sustainable output of FBB in term of quantity. The main purpose of the research is to get sufficient numbers of FBB at individual oil palm plant using Artificial Domestic Pollination System (ADOPSY™) that was invented by the researcher. Applied research base on case study undertaken in Felda Cawangan Tembangau 6, Pahang, under the management of Felda Global Venture (FGV). Data collection completed by the FGV staff by using standard format so called “Bancian tandan hitam†or Fresh Fruit Bunch Census Format without influences by the researcher, ensuring data corroborated. The data is analyzed to examine the development in term of production referring to the increased quantity of fresh fruit bunch. FGV was chosen due to its worldwide establishment among the biggest oil palm production conglomerate in Malaysia. The most vital finding of this research is to confirm that the technology (ADOPSY™) and supported product (PreMix-SP) used in this research, would produce sustainable output production of FBB. The research demonstrated the increasing value of production of FBB by implementing check and control method under treated test plot compared to untreated test plot for period of one year. This research will also facilitate opportunity profit by eliminating defect, referring to decreasing numbers of abortion in plantation production. 

References

Kevan, P. G. and T. P. Phillips. 2001. The Economic Impact Of Pollinator Decline: An Approach To Assessing The Consequences. Conservation Ecology. 5(1): 8.

Anders S. Barod, Melanie Hagen, and Finn Borchsenius. 2011. Twenty-Five Years Of Progress In Understand Pollination Mechanisms In Palm (Arecaceae). Annals of Botany. 108: 1503-1516

C. I. Aisagobonhi, Norman Kamarudin, C. O. Okwuagwu, Mohd Basri Wahid, Tervor Jackson and V. Adaigbe. 2004. Preliminary Observation on a Field Population of The Elaidobius Kamerunicus in Benin City, Niegeria. International Journal of Tropical Insect science. 24(3): 255-259.

Hartley, C. W. S. 1988. The Oil Palm (Elaies guineensis) Jacq. Longman Scientific & Technical. 761.

Hohd Hanif Haron and Mohd Roslan Md. Noor. 2002. Fruit Set and Oil Palm Bunch Component. Journal of Oil Palm Research. 14(2): 24-33.

Syed, R. A., Law, and Corley, R. H. V. 1982. Insect Pollination Of The Oil Palm: Introduction, Establishment And Pollinating Efficiency Of Elaiedobious In Malaysia. The Planters: 58: 547.

D. C. Forero, P. Hormaza and H. M. Romeo. 2012. Phenological Growth Stage Of African Oil Palm (Elaeis guineenis). Annal of Applied Biology. 160 (2012): 56-65.

Barbara Gemmill, Connal Eardley, Peter Kwapong. 2004. African Pollination Initiative. Workshop on Solitary Bees: Conservation, Rearing and Management for Pollination. International Journal Of Tropica Insect. April 26-30.2004. ICIPE and CABI.

Appiah, S. O. and Agyei-Dwarko. 2013. Studies On Entomophil Pollination Towards Sustainable Production And Increased Profitability In The Oil Palm. Elixir Agriculture. 55(2013): 12878-12883

K. A. Myint, M. Y. Rafii, S. A Sheikh-Abdullah, N. M. Lwin, A. Mohd Din and M. A. Latif. 2012. Determination Of The Optimum Pollen Germination Medium For Different Fruit Forms Of Oil Palm (Elaies guineensis). Journal of Animal & Plant Sciences. 14(1): 1855-1865: ISSN 2071-7024.

S. Sivasubramanian and S. Karthick Raja Namasivayam. 2013. Evaluation Of Phenol Degradation By Effective Microorganism (EM) Technology With EM-1. Academic Journals. 7(32): 4117-4122.

Yusof Basiron. 2007. Palm Oil Production Through Sustainable Plantations. Eur. J. Lipid Sci. Technol. 109(2007): 289-295.

Downloads

Published

2016-07-25

Issue

Section

Science and Engineering

How to Cite

INNOVATION IN AGRICULTURAL SUPPORT ON SUSTAINABILITY FOR FRESH FRUIT BUNCH (FFB) OF ELAIS GUINEESIS IN MALAYSIA USING ARTIFICIAL DOMESTIC POLLINATION SYSTEM (ADOPSYâ„¢). (2016). Jurnal Teknologi (Sciences & Engineering), 78(8). https://doi.org/10.11113/jt.v78.7296