A REVIEW OF CHEMICAL AND PHYSICAL PROPERTIES OF COCONUT SHELL IN ASPHALT MIXTURE
DOI:
https://doi.org/10.11113/jt.v78.8002Keywords:
Coconut shell, SEM, XRD, XRF, FTIRAbstract
Coconut shell is an agricultural waste which is abundant to the environment and also rise the risk to health as well as environment. Currently, most of the researchers are investigate the use of waste material which can reduce the costof construction and increase the strength. Some of thewaste materials are used in construction for instance palm oil fuel ash, rice husk, fly ash slag, sludge, coconut shell and etc. Hence, coconut shellwas selected for this study. Generally, the chemical and physical properties of coconut shell in road construction was highlighted in this paper and compared with others raw materials. In addition, the chemical and physical characteristics of coconut shell was presented according to X-ray Fluorescence (XRF), Scanning Electron Microscopy (SEM),Fourier Transform Infrared Spectroscopy (FTIR) Analysis and X-ray Diffraction (XRD). A review of using coconut shell in asphalt mixture has better potential than others raw materials to constribute in construction field.
References
Gunasekaran, K., Annadurai, R. and Kumar, P. 2012. Long Term Study on Compressive and Bond Strength of Coconut Shell Aggregate Concrete. Construction and Building Materials. 28(1): 208-215.
Gunasekaran, K., Kumar, P. and Lakshmipathy, M. 2011. Mechanical and Bond Properties of Coconut Shell Concrete. Construction and Building Materials. 25(1): 92-98.
Kaur, M. and Kaur, M. 2012. A Review on Utilization of Coconut Shell as Coarse Aggregate in Mass Concrete. International Journal Of Applied Engineering Research. 7(11): 05-08.
Varghese, S., Kuriakose, B., Thomas, S. and Koshy. A. 1991. Studies on Natural Rubbershort Sisal Fiber Composites. Indian J. Nat. Rubb. Res. 4: 55.
Rusbintardjo, G., Hainin, M. R., & Yusoff, N. I. M. 2013. Fundamental and Rheological Properties Of Oil Palm Fruit Ash Modified Bitumen. Construction and Building Materials. 49: 702-711.
Sufian, Z., Aziz, N. A., Matori, M. Y., Hussain, M. Z., Hainin, M. R., & Oluwasola, E. A. 2014. Influence of Active Filler, Curing Time and Moisture content on the Strength Properties of Emulsion and Foamed Bitumen Stabilized Mix. Jurnal Teknologi. 70(4):135-141
Oksman, K. and C. Clemons. 1998. Mechanical Properties Polypropylene-Wood. Journal Of Applied Polymer Science. 67: 1503-1513.
Park, B.D. and J.J. Balatinecz. 1997. Mechanical Properties of Woodâ€Fiber/Toughened Isotactic Polypropylene Composites. Polymer Composites. 18(1): 79-89.
Raj, R., B. Kokta, G. Groleau, and C. Daneault. 1989. Use of Wood Fiber as A Filler In Polyethylene-Studies on Mechanical-Properties. Plastics and Rubber Processing and Applications. 11(4): 215-221.
Sahari, J. and S. Sapuan. 2011. Natural Fibre Reinforced Biodegradable Polymer Composites. Reviews on Advanced Materials Science. 30: 166-174.
Sandi, A., D. Caufield, R. Jacobson, and R. Rowell. 1995. Renewable Agricultural Fiber as Reinforcing Fillers in Plastics: Mechanical Properties of Kenaf Fiber-Polypropylene Composites. Ind. Eng. Chem. Res. 34: 1889-1896.
Sapuan, S. and M. Maleque. 2005. Design and Fabrication of Natural Woven Fabric Reinforced Epoxy Composite for Household Telephone Stand. Materials & Design. 26(1): 65-71.
Yam, K. L., B. K. Gogoi, C. C. Lai, and S.E. Selke. 1990. Composites from Compounding Wood Fibers with Recycled High Density Polyethylene. Polymer Engineering & Science. 30(11): 693-699.
Hainin, M. R., Matori, M. Y., & Akin, O. E. 2014. Evaluation of Factors Influencing strength of Foamed Bitumen Stabilised Mix. Jurnal Teknologi. 70(4) : 111-119
Oluwasola, E. A., Hainin, M. R., & Aziz, M. M. A. 2015. Evaluation Of Asphalt Mixtures Incorporating Electric Arc Furnace Steel Slag And Copper Mine Tailings For Road Construction. Transportation Geotechnics. 2: 47-55.
Kumar, A. and Swamy, R. 2011. Evaluation of Mechanical Properties of Al6061, Flyash and E-Glass Fiber Reinforced Hybrid Metal Matrix Composites. ARPN Journal of Engineering and Applied Sciences. 6(5):40-44.
Prasad, S. and Krishna, R. 2011. Production and Mechanical Properties of A356. 2/RHA Composites. International Journal Of Advanced Science And Technology. 33: 51-58.
Aigbodion, V., Hassan, S., Ause, T., and Nyior, G., 2010. Potential Utilization Of Solid Waste (Bagasse Ash). Journal of Minerals & Materials Characterization & Engineering. 9(1): 67-77.
Bienia, J., Walczak, M., Surowska, B., and J. Sobczaka. 2003. Microstructure and Corrosion Behaviour Of Aluminum Fly Ash Composites. Journal of Optoelectronics and Advanced Materials. 5(2): 493-502.
Prasad, N. and S. Acharya. 2006. Development and Characterization Of Metal Matrix Composite Using Red Mud an Industrial Waste For Wear Resistant Applications. Development.
Bambogye, A. and Jekayinfa, S.O., 2006. Energy Consumption Pattern in Coconut Processing Operation. Agricultural Engineering International. VIII (the CIGR Journal Manuscript. EE 05 013).
Shelke, A.S., Ninghot, K.R., Kunjekar, P.P., and Gaikwad, S.P., 2014. Coconut Shell as Partial Replacement for Coarse Aggregate: Review. International Journal of Civil Engineering Research. 5: 211-214.
Nagarajan, V.K., Devi, S.A., Manohari, S., and Santha. M.M., 2014. Experimental Study on Partial Replacement of Cement with Coconut Shell Ash in Concrete. International Journal. 3(3): 651-661
Madakson, P., Yawas, D., and Apasi. A., 2012. Characterization of Coconut Shell Ash For Potential Utilization In Metal Matrix Composites For Automotive Applications. International Journal Of Engineering Science And Technology. 4(3): 1190-1198.
Olanipekun, E., K. Olusola, and O. Ata. 2006. A Comparative Study Of Concrete Properties using Coconut Shell And Palm Kernel Shell As Coarse Aggregates. Building and Environment. 41(3): 297-301.
Frederick, T. and Norman, W. 2004. Natural Fibers Plastics And Composites. EUA: Kluwer Academic Publishers.
Bhaskar, J. and Singh, V., 2013. Water Absorption and Compressive Properties of Coconut Shell Particle Reinforced-Epoxy Composite. Journal of Materials Environment Science. 1: 113-118.
Munirah Abdullah, N. and Ahmad, I. 2012. Effect of Chemical Treatment On Mechanical And Water-Sorption Properties Coconut Fiber-Unsaturated Polyester From Recycled PET. ISRN Materials Science. 2012.
Thaker, N., Srinivasulu, B., and Shit. S.C. A Study on Characterization and Comparison of Alkali Treated and Untreated Coconut Shell Powder Reinforced Polyester Composites.
Dung, S.D., 2014. Assessment of the Suitability Of Coconut Shell Charcoal As Filler In Stone Matrix Asphalt.
Ghani, W. W. A. K., Abdullah, M.F., Loung, C., Ho, C. and Matori, K., 2008. Characterization of Vitrified Malaysian Agrowaste Ashes as Potential Recycling Material. International Journal of Engineering and Technology. 5(2): 111-117.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
