EFFECT OF SILICA FUME ON THE PERFORMANCE OF POLYVINYL ALCOHOL CONCRETE

Authors

  • Abu Bakar Ibrahim Faculty of Art,Computing and Creative Industry, Universiti Pendidikan Sultan Idris, 35900 Tanjung Malim, Perak, Malaysia
  • Wan Norsariza Wan Husin School of Civil Engineering, University Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang, Malaysia
  • Izwan Johari School of Civil Engineering, University Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang, Malaysia

DOI:

https://doi.org/10.11113/jt.v78.8841

Keywords:

Silica Fume, Polyvinyl Alcohol, workability, compressive strength, super plasticizer

Abstract

This paper reports the study with experimental investigation of Silica Fume (SF) concrete made with Polyvinyl Alcohol (PVA). Compressive strength of concrete is considered as a measure to determine the strength of concrete with different age and different cement composition. The major variables of this studied includes workability and compressive strength. Concrete mixtures are prepared under the same proportions, by different replacement of SF content and also used super plasticizer. SF was used to replace PCC at dosage levels of 5%, 10%, 15% and 20% by weight of the binder. The effect of cement substitution was evaluated and both experimental details and preliminary results are presented. The result show that the compressive strength of concrete containing SF was significantly improved and that cement replacement up to 15% SF shown the superior enhancement.

References

Mazloom, M., Ramezanianpour, A. & Brooks, J. 2004. Effect Of Silica Fume On Mechanical Properties Of High-Strength Concrete. Cement and Concrete Composites. 26(4): 347-357.

Chung, D., 2002. Review: Improving Cement-Based Materials By Using Silica Fume. Journal of Materials Science. 37: 673-682.

PawadePrashant. Y, Nagarnaik P. B and Pande A. M. 2011. Influence Of Silica Fume In Enhancement Of Compressive Strength, Flexural Strength Of Steel Fibers Concrete And Their Relationship. International Journal Of Civil And Structural Engineering. 2: 1.

Rao, G. A. 2003. Investigations On The Performance Of Silica Fume-Incorporated Cement Pastes Andmortars. Cem. Concr. Res. 33(11): 1765–1770.

Kim, J. H., Robertson, R. E. and Naaman, A. E. 1999. Structure and Properties of Poly (Vinyl Alcohol)-Modified Mortar and Concrete. Cement and Concrete Research. 29: 407-415.

S. K. Saxena. 2004. Polyvinyl Alcohol (PVA). Chemical and Technical Assessment. 61st JECFA.

N. B. Singh and Sarita Rai. 2009. Effect Of Polyvinyl Alcohol On The Hydration Of Cement With Rice Husk Ash. Cement and Concrete Research. 31(2001): 239-243.

Ercikdi, B., Kesimal, A., Cihangir, F., Deveci, H. and Alp, Ä°. 2009. Cemented Paste Backfill of Sulphide-Rich Tailings: Importance of Binder Type and Dosage, Cement and Concrete Composites. 31: 268-274.

Kou, S. C. and Poon, C. S. 2010. Properties of Concrete Prepared with PVA-Impregnated Recycled Concrete Aggregates, Cement and Concrete Composites. 32: 649-654.

Yunsheng Xu, D. D. L. Chung. 2000. Improving Silica Fume Cement By Using Silane. Cement and Concrete Research 30(2000): 1305-1311.

Tayeh, B. A., Abu Bakar, B., Megat Johari, M. A & Zeyad, A. 2013. The Role Of Silica Fumes In The Adhesion Of Concrete Restoration Systems. Advanced Materials Research. 626: 265-269.

Silica Fume Association: Silica Fume Manual. 2005. 38860 Sierra Lane, Lovettsville, VA 20180, USA.

Downloads

Published

2016-05-30

How to Cite

EFFECT OF SILICA FUME ON THE PERFORMANCE OF POLYVINYL ALCOHOL CONCRETE. (2016). Jurnal Teknologi, 78(5-10). https://doi.org/10.11113/jt.v78.8841