VANADIUM BASED LITHIUM NICKEL ALUMINIUMOXIDE SYSTEM WITH GOOD PERFORMANCE IN LITHIUM-ION BATTERIES
DOI:
https://doi.org/10.11113/jt.v78.8844Keywords:
Lithium-ion batteries, Lithium Nickel Oxide, CathodeAbstract
LiNixV1-x-y AlyO2, are cathode materials for lithium ion batteries which have been synthesized via carbon combustion method. Lithium nickel oxide derivatives are considered by the battery manufacturers to be very promising for application in 4V lithium-ion batteries. The objective of this study is, to successfully synthesize a lithium nickel vanadium aluminum oxide cathode which can show intercalation and de-intercalation process during cyclic voltammetry testing and a discharge capacity of above 50mAh/g. LiNi1-x-yVxAlyO2were synthesized by the carbon combustion method using acetylene carbon black as a binder. X-Ray Diffraction (XRD) reveals extra peaks related to Vanadium metal when it is added into LiNiAlO2. The intensity peak of the spectrum increased when the V content is increased. Scanning Electron Microscopy (SEM) shows the grain particles become non-spherical and flakes when more vanadium substituted for nickel in the sample. Fourier Transform Infrared (FTIR) spectroscopy analysis and Energy dispersive analysis of X-Ray (EDAX) confirmed that NO3- impurities are not present and composition in samples Galvanostatic charge/discharge data obtained illustrates a discharge capacity of 80.57mAh/g LiNi0.8V0.1Al0.1O2 and an average of 80.55mAh/g for 10 cycles whereas LiNi0.6V0.3Al 0.1O2 highest discharge capacity is 80.52mAh/g and also an average of 80.53mAh/g for 10 cycles. Voltammographs of the LiNi0.8V0.1Al0.1O2, LiNi0.7V0.2Al0.1O2 and LiNi0.6V0.3Al0.1O2 materials showed good oxidation and reduction loop at 0.05mV/s and 1 mV/s scan rate.References
Väyrynen, A and Salminen, J. 2012. Lithium Ion Battery Production. J. Chem Thermodynamics. 46: 80-85.
Diouf, B. and Pode, R. 2015. Potential of Lithium-Ion Batteries in Renewable Energy. Renewable Energy. 7: 373-380.
Park, S. H., Park, K. S., Sun, Y. K., Nahm, K. S., Lee, Y. S and Yoshio, M. 2001. Structural and Electrochemical Characterization of Lithium Excess and Al-doped Nickel Oxides Synthesized by the sol-gel method. Electrochimica Acta. 46: 1215-1222.
Zhao J, He J, Ding X, Zhou J, Ma Y, S. Wu, and Huang, R. 2010. J. Power Sources. 195: 6854–6859.
Sethuprakhash, V., Mustapha, R and Shaari, H. R. 2014. Competitive Performance by a New Non-Transitions Metal Doped Cathodic Material LiCo0.7Ni0.2Al0.09Mg0.01O2 for Lithium-Ion Batteries. Jurnal Teknologi. 69(1): 75-79.
Sathiyamoorthi R and Vasudevan, T. 2007. Synthesis, Characterization And Electrochemical Behavior Of LiNi1-xBaxO2 (x = 0.0, 0.1, 0.2, 0.3 and 0.5) Cathode Materials. Electrochem Comm. 9: 416-424.
Thomas, M. G. S. R., David, W. I. F., Goodenough J. B and Grove, P.1985. Synthesis And Structural Characterization Of The Normal Spinel Li[Ni2]O4. Materials Research Bulletin. 20: 1137.
Chang, K., Hallstedt, B., Music D. 2012. Thermodynamic Description of the LiNiO2–NiO2 Pseudo-Binary System And Extrapolation To The Li(Co, Ni)O2–(Co, Ni)O2 System. Music
CALPHAD: Computer Coupling of Phase Diagram and Thermochemistry. 37: 100-107.
Fergus, J. K. 2010. Recent Development in Cathode Material for Lithium-Ion Batteries. Journal of Power Source. 195: 939-954.
Li, C., Zhang, H. P., Fu, L. J., Wu, Y. P., Rahm, E., Holze, R., Wu, H. Q. 2006. Cathode Materials Modified By Surface Coating For Lithium Ion Batteries. Electrochimica Acta. 5: 3872-3883
Zhong, Y. D., Zhao, X. B., Cao, G. S. 2005. Characterization of Solid-State Synthesized Pure And Doped Lithium Nickel Cobalt Oxide. Material Science and Engineering. B121: 248-254.
a. Albrecht, S., Kumpers, J., Kruf, M., Malcus, S., Vogler, C., Wahl. And Mehrens, M. W.2003. Electrochemical and Thermal Behavior of Aluminium-and Magnesium-a Doped Spherical Lithium Nickel Cobalt Mixed Oxides Li1-x(Ni1-y-zCoyMz)O2 (M=Al,Mg). Journal of Power Sources. 119-121: 178-183
Kalyani, P and Kalaiselvi, N. 2005. Various Aspect of LiNiO2 Chemistry: A Review. Science and Technology of Advanced Materials. 6: 689-703
Julien, C., Nazri, G. A and Rougier. 2000. Electrochemical Performances Of Layered LiM1−yMy’O2 (M=Ni, Co; M′=Mg, Al, B) oxides in lithium batteries. Solid State Ionics. 121: 121-130.
Chang, Z., Chen, Z., Wu, F., Tang, H., Yuan, X. Z and Wang, H. 2008. Synthesis And Characterization Of Nonspherical LiCoO2 with High Tap Density By Two-Step Drying Method. Electrochem. Solid- State Lett. 11(12): A229–A232.2.
Sethuprakhash V. 2005. Thesis: Structural And Electrochemical Studies Of Lithium Nickel Oxide Derivatives Doped With Transition And Non-Transition Metal Prepared By Solid-State Reaction Method.
Kalyani, P., Kalaiselvi, N and Renganathan, N.G.2005.LiNiMxV1-xO4 (M= Co,Mg and Al) Solid Solutions-Prospective Cathode Materials for Rechargeable Lithium a Batteries. Materials Chemistry and Physics. 90: 196-202
Shao, L., Shu, J, Ma, R., Shui, M., Hou, L., Wu, K., Wang and Ren Y. 2013. Electrochemical Characteristics and Intercalation Mechanism of Manganese Carbonate as Anode Material for Lithium–Ion Batteries. Int. J Electrochem. Sci. 8: 1170-1180
Ohzuku, T., Ueda, A and Kouguchi, M.1995. J. Electrochem. Soc. 142: 403
Gao, Y., Yakovleva, M., Ebner, E., Quinn, A., Schwindeman, R., Fitch, B and Engel, J. 1998. Electrochem. Soc. Fall Meeting, Boston, USA.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
