DESIGN AND IMPLEMENTATION OF A PID-BASED LUMINANCE CONTROL AND LIGHT SENSING USING SMOOTHING AVERAGING TECHNIQUE

Authors

  • Editha Macorol General Engineering and Applied Sciences Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Favis Joseph Balinado Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Leo M. Flores Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Ezekiel V. Pascual Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Christian M. Silva Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Raymee Keenah R. Torres Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Janromer M. Valderama Electronics Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines
  • Rionel Belen Caldo Electronics and Communications Engineering Department, Lyceum of the Philippines University-Laguna (LPU-L), Laguna, Philippines, De La Salle University (DLSU), Manila, Philippines

DOI:

https://doi.org/10.11113/jt.v78.8920

Keywords:

Compact Fluorescent Lamp (CFL), Light Emitting Diode (LED)

Abstract

Nowadays, lighting shares a large part in the global energy consumption, lighting consumption can be easily reduced with the use of efficient light sources. The most commonly used light source is the incandescent light bulb. As time passed by, Compact Fluorescent Lamp and Light Emitting Diode use became prevalent because of their advantages over the incandescent light. The researchers were able to develop and implement a PID controlled lighting system using Light Emitting Diode utilizing the smoothing-averaging technique in its sensors. Tests were done with the system with and without smoothing technique to identify the effect of the technique used. The system automatically varies its light intensity output depending on the light stimuli maintaining the luminance level of the laboratory based on standards.

References

Sumit Kushwaha. 2011. A comprehensive Study of Various Lamps through Energy Flow Diagrams, Investigation On Nature Of Waste Heat From Incandescent Light Bulbs. IEEE. 1(1): 1-6.

Edison, T. 2014. [Online], Available: http://en.wikipedia.org/wiki/Incandescent_light_bulb [Accessed August 2014]

Dehnert, E. 2014. [Online], Available: http://www.eenews.net/stories/1059993391 [Accessed July 2014]

Nguyen, S. 2014. [Online], Available: https://prezi.com/vxhjj5ozc2kr/compact-fluorescent-light-bulbs/ [Accessed July 2014]

Daniel. T. 2012. [Online], Available: ttp://www.ledluxor.com/top-10-benefits-of-led-lighting#intro [Accessed August 2014]

Poret, S., Jony, R. D. and Gregory, S. 2009. Image Processing for Color Blindness Correction. IEEE Toronto International Conference. 1–6.

Downloads

Published

2016-06-08

Issue

Vol. 78 No. 6-3: Advancement on Mechanical and Manufacturing Engineering Technology Part II

Section

Science and Engineering

License

Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.

How to Cite

DESIGN AND IMPLEMENTATION OF A PID-BASED LUMINANCE CONTROL AND LIGHT SENSING USING SMOOTHING AVERAGING TECHNIQUE. (2016). Jurnal Teknologi, 78(6-3). https://doi.org/10.11113/jt.v78.8920