RESPONSE OF FBG–BONDED PLASTIC PLATE AT DIFFERENT LOCATIONS OF APPLIED STRESS

Authors

  • Younis Mohammed Salih Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Yusof Munajat Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Abd Khamim Ismail Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Hazri Bakhtiar Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/jt.v78.9201

Keywords:

Acoustic sensor, fiber Bragg grating, shift in Bragg wavelength

Abstract

Fiber Bragg Grating sensing (FBG) has been intensively studied in the application of smart structures because of its immense advantages offered over those of the conventional sensors. In these researches unique characteristics of FBG, like its high sensitive resonance frequency spectrum and its resonant behavior were reported when FBG was coated by a ring-shaped material and used as an underwater acoustic sensor. In this study, the response of a FBG-bonded plastic plate at different locations of applied stress is demonstrated. The sensing element utilized for this purpose is a 10 mm FBG sensor bonded onto the surface of a plastic plate. Results of reflection spectrum showed that the output power increased randomly when the location of applied stress approached the location of FBG. This was assured from the increment of the area of reflection spectrum. The random increase in the output voltage was attributed to the insufficient stiffness of the plastic ruler, suggesting the implement of graphene plate instead of plastic ruler and increasing the grating length of FBG. The results showed an increase in the output power as detected by the photodiode. Consequently, a clear correlation between the optical and electrical outputs was observed. 

References

Hill, K., Fujii, Y., Johnson, D. C. and Kawasaki, B. 1978. Photosensitivity In Optical Fiber Waveguides: Application To Reflection Filter Fabrication. Applied Physics Letters. 32(10): 647-649.

Hill, K. O. and Meltz, G. 1997. Fiber Bragg Grating Technology Fundamentals And Overview. Lightwave Technology, Journal of. 15(8): 1263-1276.

Skaar, J. 2000. Synthesis And Characterization Of Fiber Bragg Gratings. NTNU. Mastro, S. A. Optomechanical Behavior Of Embedded Fiber Bragg Grating Strain Sensors. Ph.D. Thesis. Drexel University. 2005.

Othonos, A. 1997. Fiber Bragg Gratings. Review Of Scientific Instruments. 68(12): 4309-4341.

Matin, M., Hussain, N. and Shoureshi, R. 2005. Fiber Bragg Sensor For Smart Bed Sheet. Optics & Photonics 2005. International Society for Optics and Photonics. 590706-590706.

Lin, Y.-B., Lin, T.-K., Kuo, Y.-H., Wang, L. and Chang, K.-C. 2002. Application of FBG Sensors To Strain And Temperature Monitoring Of Full Scale Prestressed Concrete Bridges. Optical Fiber Sensors Conference Technical Digest, 2002. Ofs 2002, 15th. IEEE. 211-214.

Li, H.-N., Li, D.-S. and Song, G.-B. 2004. Recent Applications Of Fiber Optic Sensors To Health Monitoring In Civil Engineering. Engineering Structures. 26(11): 1647-1657.

Miesen, N., Mizutani, Y., Groves, R. M., Sinke, J. and Benedictus, R. 2011. Lamb Wave Detection In Prepreg Composite Materials With Fibre Bragg Grating Sensors. SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society For Optics And Photonics. 79812J-79812J.

Chan, T. H., Yu, L., Tam, H.-Y., Ni, Y.-Q., Liu, S., Chung, W. and Cheng, L. 2006. Fiber Bragg Grating Sensors For Structural Health Monitoring Of Tsing Ma Bridge: Background And Experimental Observation. Engineering Structures. 28(5): 648-659.

Seo, D.-C., Yoon, D.-J., Kwon, I.-B. and Lee, S.-S. 2009. Sensitivity Enhancement Of Fiber Optic FBG Sensor For Acoustic Emission. The 16th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics. 729415-729415.

Lee, J. R., Chong, S. Y., Yun, C. Y. and Sohn, H. 2010. Design of Fiber Bragg Grating Acoustic Sensor for Structural Health Monitoring of Nuclear Power Plant. Advanced Materials Research. 123: 859-862.

Takahashi, N., Hirose, A. and Takahashi, S. 1997. Underwater Acoustic Sensor With Fiber Bragg Grating. Optical Review. 4(6): 691-694.

Takahashi, N., Tetsumura, K. and Takahashi, S. 1999. Underwater Acoustic Sensor Using Optical Fiber Bragg Grating As Detecting Element. Japanese Journal Of Applied Physics. 38: 3233.

Moccia, M., Pisco, M., Cutolo, A., Galdi, V., Bevilacqua, P. and Cusano, A. 2011. Opto-acoustic Behavior Of Coated Fiber Bragg Gratings. Optics Express. 19(20): 18842-18860.

Wild, G. and Hinckley, S. 2010. Optical Fibre Bragg Gratings For Acoustic Sensors. International Congress on Acoustics (ICA). 23-–27.

http://www.smartfibres.com/interrogationtechniques.

Lee, B. and Jeong, Y. 2002. Interrogation Techniques For Fiber Grating Sensors And The Theory Of Fiber Gratings. Fiber Optic Sensors. 295-381.

Webb, D. J., Surowiec, J., Sweeney, M., Jackson, D. A., Gavrilov, L., Hand, J., Zhang, L. and Bennion, I. 1996. Miniature Fiber Optic Ultrasonic Probe. SPIE’s 1996 International Symposium on Optical Science, Engineering, and Instrumentation. International Society for Optics and Photonics. 76-80.

Lin, B. and Giurgiutiu, V. 2014. Development Of Optical Equipment For Ultrasonic Guided Wave Structural Health Monitoring. SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics. 90620R-90620R.

Perez, I. M., Cui, H. and Udd, E. 2001. Acoustic Emission Detection Using Fiber Bragg Gratings. SPIE’s 8th Annual International Symposium on Smart Structures and Materials. International Society for Optics and Photonics. 209-215.

Ambrosino, C., Diodati, G., Laudati, A., Gianvito, A., Sorrentino, R., Breglio, G., Cutolo, A., Cusano, A. et al. 2007. Active Vibration Control Using Fiber Bragg Grating Sensors And Piezoelectric Actuators In Co-Located Configuration. Third European Workshop on Optical Fibre Sensors. International Society for Optics and Photonics. 661940-661940.

Fujisue, T., Nakamura, K. and Ueha, S. 2006. Demodulation Of Acoustic Signals In Fiber Bragg Grating Ultrasonic Sensors Using Arrayed Waveguide Gratings. Japanese Journal Of Applied Physics. 45(5S): 4577.

Lin, B. and Giurgiutiu, V. 2013. Exploration of Ultrasonic Guided Wave Detection with Optical Fiber Sensors and Piezoelectric Transducers. Proc. 9th International Workshop on Structural Health Monitoring, IWSHM.

Wild, G. and Richardson, S. 2012. Optimisation of Power Detection Interrogation Methods for Fibre Bragg Grating Sensors.

Downloads

Published

2016-06-23

How to Cite

RESPONSE OF FBG–BONDED PLASTIC PLATE AT DIFFERENT LOCATIONS OF APPLIED STRESS. (2016). Jurnal Teknologi, 78(6-11). https://doi.org/10.11113/jt.v78.9201