JOULE HEATING EFFECT REDUCTION OF AN ELECTROMAGNET SYSTEM UTILIZING ON-CHIP MAGNETIC CORE
DOI:
https://doi.org/10.11113/jt.v78.9591Keywords:
Joule heating, electromagnet, Lab-on-Chip (LoC), Magnetically Activated Cell Sorting (MACS), biological cellsAbstract
Joule heating effect is substantial in an electromagnet system due to high density current from current-carrying conductor for high magnetic field generation. In Lab-on-chip (LoC) Magnetically Activated Cell Sorting (MACS) device, Joule heating effect generating high temperature and affecting the biological cells viability is investigated. The temperature rise of the integrated system was measured using resistance temperature detector, RTD Pt100. Three temperature rise conditions which are from the bare spiral-shaped magnet wire, the combination of magnet wire and on-chip magnetic core and combination of magnet wire, on-chip magnetic core and 150 mm polydimethylsiloxane (PDMS) layer have been investigated. Â The combination of electromagnet of spiral-shaped magnet wire coil and on-chip magnetic core has reduced the temperature significantly which are, ~ 38 % Â and ~ 26 % with magnet wire winding, N = 10 (IDC = 3.0 A, t = 210 s) and N = 20 (IDC = 2.5 A, t = 210 s) respectively. The reduced Joule heating effect is expected due to silicon chip of high thermal conductivity material enable fast heat dissipation to the surrounding. Â Therefore, the integration of electromagnet system and on-chip magnetic core has the potential to be used as part of LoC MACS system provided the optimum operating conditions are determinedReferences
Cao, Q., Han, X., and Li, Li. 2014. Configurations and Control of Magnetic Fields for Manipulating Magnetic Particles in Microfluidic Applications: Magnet Systems and Manipulation Mechanisms. Lab Chip. 14 (15): 2762–77.
Fulcrand, R., Jugieu, D., Escriba, C., Bancaud, A., Bourrier, D., Boukabache, A. and Gué, A.M. 2009. Development of a Flexible Microfluidic System Integrating Magnetic Micro-actuators for Trapping Biological Species. J. Micromechanics Microengineering. 19(10): 105019.
Ramadan, Q., Poenar, D. P. and Yu, C. 2008. Customized Trapping of Magnetic Particles,†Microfluid. Nanofluidics. 6(1): 53–62.
Guo, S. S., Zuo, C. C., Huang, W.H., Peroz, C. and Chen, Y. 2006. Response of Super-paramagnetic Beads in Microfluidic Devices with Integrated Magnetic Micro-columns. Microelectron. Eng. 83(4-9): 1655–1659.
Xiang, Y., Miller, J., Sica, V. and LaVan, D. A. 2008. Optimization of Force Produced by Electromagnet Needles Acting on Superparamagnetic Microparticles. Appl. Phys. Lett. 92(12): 124104,
Beyzavi, A. and Nguyen, N. -T. 2008. Modeling and Optimization of Planar Microcoils. J. Micromechanics Microengineering. 18(9): 095018.
Santra, A., Chakraborty, N. and Ganguly, R. 2009. Analytical Evaluation of Magnetic Field by Planar Micro-electromagnet Spirals for MEMS Applications. J. Micromechanics Microengineering. 19(8): 085018.
Suzuki, H., Ho, C.-M. and Kasagi, N. 2004. A Chaotic Mixer for Magnetic Bead-Based Micro Cell Sorter. J. Microelectromechanical Syst. 13(5): 779–790.
Song, S.-H., Kwak, B.-S., Park, J.-S., Kim, W. and Jung, H.-I. 2009. Novel Application of Joule Heating to Maintain Biocompatible Temperatures in a Fully Integrated Electromagnetic Cell Sorting System. Sensors Actuators A Phys. 151(1): 64–70.
Lee, H., Purdon, A. M., and Westervelt, R. M. 2004. Micromanipulation of Biological Systems with Microelectromagnets. IEEE Trans. Magn. 40(4): 2991–2993.
Lee, H., Liu, Y., Ham, D. and Westervelt, R. M. 2007. Integrated Cell Manipulation System--CMOS/Microfluidic Hybrid. Lab Chip. 7(3): 331–7.
Zheng, Y. and Sawan, M. 2013. Planar Microcoil Array Based Temperature-Controllable Lab-on-Chip Platform. IEEE Trans. Magn. 49(10): 5236–5242.
Wiklund, M. 2012. Acoustofluidics 12: Biocompatibility and Cell Viability in Microfluidic Acoustic Resonators. Lab Chip. 12(11): 2018–28.
Reissis, Y., GarcÃa-Gareta, E., Korda, M., Blunn, G. W. and Hua, J. 2013. The Effect of Temperature on the Viability of Human Mesenchymal Stem Cells. Stem Cell Res. Ther. 4(6) : 139.
HSM Wire. 2013. Copper Magnet Wire. http://www.hsmwire.com/magnetwire.php.
Gillet, K. and Suba, M. 1983. Electrical Wire Handbook. Guilford, CT: The Wire Association International.
Wright, R. N. 2010. Wire Technology: Process Engineering and Metallurgy. Massachusetts: Elsevier.
Abidin, U., Majlis, B. Y. and Yunas, J. 2013. Ni80Fe20 V-Shaped Magnetic Core for High Performance MEMS Sensors and Actuators. RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics : 66–69.
Abidin, U., Majlis, B. Y. and Yunas, J. 2015. Fabrication of Pyramidal Cavity Structure with Micron-sized Tip using Anisotropic KOH Etching of Silicon (100). Jurnal Teknologi. 74(10): 137-148.
Madou, M. J. 2002. Fundamentals of Microfabrication: The Science of Miniaturization. Second Edition. Florida: CRC Press.
Nguyen, N.-T. and Wereley, S. T. 2002. Fundamentals and Applications of Microfluidics. Massachusetts: Artech House.
Mosaic Industries. 2011. RTD Temperature Measurements. http://www.mosaic-industries.com/ measuring-temperature-with-rtds.html.
Zheng, Y. and Sawan, M. 2013. Planar Microcoil Array Based Temperature-Controllable Lab-on-Chip Platform. IEEE Trans. Magn. 49(10): 5236–5242.
Erickson, D. and Li, D. 2004. Integrated Microfluidic Devices. Anal. Chim. Acta. 507(1): 11–26.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
