INFLUENCE OF PROCESSING ON MECHANICAL PROPERTIES OF 3Y-TZP FOR DENTAL APPLICATIONS
DOI:
https://doi.org/10.11113/jt.v78.9858Keywords:
Cold isostatic pressing, mechanical properties, dental zirconia, agglomerationAbstract
Purpose: This study aimed to investigate the influence of processing on the mechanical properties of 3 mol% yttrium–tetragonal zirconia (3Y–TZP) for dental applications. In this study, cold isostatic pressing (CIP) was adopted as a second consolidation process to enhance the mechanical properties of slip-cast 3Y–TZP. Methods: Two batches were prepared. The first batch of 3Y–TZP suspension was fabricated via colloidal processing. Then, the suspension was subjected to the slip casting process. Simultaneously, the second batch was prepared via colloidal processing, followed by CIP. The specimens were sintered at 1600 °C. Sintered density, hardness, microstructure, and phase distribution were examined and analyzed. Results showed that the specimens fabricated via slip casting and CIP had the highest density of 99% of the theoretical density (6.1 g/cm3) and hardness of 14.4 GPa. The microstructure of the CIP samples was homogeneous with low porosity. According to X-ray diffraction examination, both batches exhibited a single phase (tetragonal phase). Conclusion(s): The density, hardness, and homogeneity of the microstructure of Y–TZP fabricated via slip casting and CIP improved. Using CIP as the second consolidation method improved the quality of green bodiesReferences
Pilathadka, S., Vahalová, D., and Vosáhlo, T. 2007. The Zirconia: a New Dental Ceramic Material. An Overview. Prague Medical Report. 108: 5–12.
Kelly, J. R., and Denry, I. 2008. Stabilized zirconia as a structural ceramic: An overview. Dental Materials. 24: 289–298.
James, Z. S., and TomaŽ, K. 2014. Advanced Ceramics for Dentistry. USA: Elsevier.
Rami, M-L., Meireles, M., Cabane, B., and Guizard, C. 2009. Colloidal Stability for Concentrated Zirconia Aqueous Suspensions. Journal of the American Ceramic Society. 92: 50-56.
Kendall, K. 1989. Influence Of Powder Structure On Processing And Properties Of Advanced Ceramics. Powder Technology. 58:151-61.
Rafferty, A., Alsebaie, A. M., Olabi, A. G. and Prescott, T. 2009. Properties of Zirconia-Toughened-Alumina Prepared Via Powder Processing and Colloidal Processing Routes. Journal of Colloid and Interface Science. 329: 310-315.
Lewis, J. A. 2000. Colloidal Processing of Ceramics. Journal of the American Ceramic Society. 83: 2341-2359.
C.H. Chin, A. Muchtar, C.H. Azhari, M. Razali, and M. Aboras. 2015. Optimization Of Ph And Dispersant Amount Of Y-TZP Suspension For Colloidal Stability. Ceramics International. 41: 9939–9946.
Mouzon, J., Glowacki, E., and Odén, M. 2008. Comparison between Slip-Casting and Uniaxial Pressing for the Fabrication of Translucent Yttria Ceramics. Journal of Materials Science. 43: 2849-2856.
Noor Faeizah Amat, Andanastuti Muchtar, Mariyam Jameelah Ghazali, and Norziha Yahaya. 2014. Suspension Stability And Sintering Influence On Yttria-Stabilized Zirconia Fabricated By Colloidal Processing. Ceramics International. 40: 5413–5419.
Vagkopoulou, T., Koutayas, S. O., Koidis, P., and Strub, J. R. 2009. Zirconia in dentistry: Part 1. Discovering The Nature Of An Upcoming Bioceramic. The European Journal of Esthetic Dentistry. 4(2): 130-51.
Roy, M. E., Whiteside, L. A., Katerberg, B. J., and Steiger, J. A. 2007. Phase Transformation, Roughness, And Microhardness Of Artificially Aged Yttria- And Magnesia-Stabilized Zirconia Femoral Heads. Journal of Biomedical Materials Research Part A. 83A(4): 1096-102.
Kim, J. W., Covel, N. S., Guess, P. C., Rekow, E. D., Zhang, Y. 2010. Concerns Of Hydrothermal Degradation In CAD/CAM Zirconia. Journal of Dental Research. 89(1): 91-5.
Mukaeda, L. E., Taguchi, S. P., Robin, A., Izario, H. J., and Salazar, R. F. S. 2012. Santos C. Degradation Of Y2O3-Stabilized Zro2 Ceramics In Artificial Saliva: ICP analysis of dissolved Y3+ and Zr4+ions. Materials Science Forum. 727-8(3): 1136-41.
Jiang, L., Liao, Y., Wan, Q., and Li, W. 2011. Effects Of Sintering Temperature And Particle Size On The Translucency Of Zirconium Dioxide Dental Ceramic. Journal of Materials Science: Materials in Medicine. 22: 2429-2435.
Chen, I.-W., and Wang, X.-H. 2000. Sintering Dense Nanocrystalline Ceramics Without Final-Stage Grain Growth. Nature. 404: 168-171.
Henderson, R., Chandler, H., Akisanya, A., Barber, H., and Moriarty, B. 2000. Finite element modelling of cold isostatic pressing. Journal of the European Ceramic Society. 20: 1121-1128.
Mazaheri, M., Simchi, A., and Golestani-Fard, F. 2008. Densification And Grain Growth Of Nanocrystalline 3Y-TZP During Two-Step Sintering. Journal of the European Ceramic Society. 28: 2933-2939.
Adolfsson, E., and Shen, Z. 2012. Effect Of Granule Density On Strength Related Defects In Zirconia. Journal of the European Ceramic Society. 32: 2653-9.
Lange, F. F. 2008. Densification Of Powder Compacts: An Unfinished Story. Journal of the European Ceramic Society. 28: 1509–1516.
Casellas, D., Cumbrera, F, L., Sánchez-Bajo, F., Forsling, W., Llanes, L., and Anglada, M. 2001. On The Transformation Toughening Of Y-Zro2 Ceramics With Mixed YTZP/PSZ Microstructures. Journal of the European Ceramic Society. 21: 765-777.
Yilmaz, H., Aydin, C., and Gul, B. E. 2007. Flexural Strength And Fracture Toughness Of Dental Core Ceramics. The Journal of prosthetic dentistry. 98: 120-128.
Downloads
Published
Issue
Section
License
Copyright of articles that appear in Jurnal Teknologi belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
