THE USE OF PERFORATED PILE BEAKWATERS TO ATTENUATE WAVES
DOI:
https://doi.org/10.11113/mjce.v22.15800Keywords:
Perforated pile breakwater, Experimental investigation, Wave transmission, Wave attenuation, Porosity, Wave steepnessAbstract
A laboratory investigation was conducted to compare the transmission characteristics of one-row and two-row submerged perforated pile breakwater models. The laboratory tests were conducted in unidirectional waves with different wave conditions and pile porosity that varied from 0.0625 to 0.48. The influences of water depth, incident wave steepness and porosities were studied. From the experimental results obtained, it was found that when the number of rows tested was increased, more wave energy was dissipated. This resulted in the decrease in transmitted wave heights. When the pile porosity was increased, less wave energy was attenuated, resulting in higher wave transmission coefficient, Kt and the transmission coefficient, Kt decreases as the wave steepness increases for all porosity values. It was also found that lower water depth has a significant influence on the transmission coefficient at higher wave steepness with Kt being less than 0.45 at a water depth below 0.23 m for partially submerged condition compared to Kt being more than 0.50 at water depth above 0.35 m for the submerged condition, for both the one-row and two-row piles respectively.References
Armono, H. D. and Hall, K. R. (2000). Wave Transmission on Submerged Breakwaters Made of Hollow Hemispherical Shape Artificial Reefs. Canadian Coastal Conf. Victoria, Canada. 1-13.
Black, K., and Mead, S. (2000) Submerged Structures for Coastal Protection: A short summary of what they were, why we need them and how they work. Summary Report, ASR Ltd., Hamilton, New Zealand, pp. 1-7.
Clauss, G. F., and Habel, R. (1999) Hydrodynamic Characteristics of Underwater Filter Systems for Coastal Protection. Canadian Coastal Conf. 1999, Victoria, Canada, pp. 139-154.
Costello, R.D. (1952) Damping of Water Waves by Vertical Circular Cylinders. Trans. Am. Geophys. Union 33 (4), pp. 513-519.
Dattari, J., Rahman, H., and Shakar, N. J. (1978) Performance Characteristics of Submerged Breakwaters. Proc. 16h Coastal Eng. Int. Conf., ASCE, New York, N. Y., pp. 2152-2171.
Dick, T. M., and Brebner, A. (1968) Solid and Permeable Submerged. Proc. 11th Int. Conf. on Coastal Eng. 1968: pp. 1141-1158.
Grüne, J. and Kohlase, J. (1974) Wave Transmission through Vertical Slotted Walls. Proc. 14th Coastal Eng. Conf., Copenhagen, Denmark. ASCE, New York, N. Y., pp. 1906-1923.
Hartmann (1969) Das Stabgitter in Instationarer Stromungsbewegung. Mitt. Des
Instituts fur Wasserbau und Wasserwirtschaft, TU Berlin, Heft 69.
Hayashi, T., Hattori, M., and Kano, T., and Shirai, M. (1966) Hydraulic Research on the Closely Spaced Pile Breakwaters. Coastal Engineering in Japan, Vol. 9, 1966, pp.
– 117.
Hattori, M. (1972) Transmission of Water Waves through Perforated Wall. Coastal Engineering in Japan, Vol. 15, 1972, pp. 69 – 79.
Kakuno, S. (1983) Reflection and Transmission of Waves Through Vertical Slit Type Structures. Proceedings of a specialty conference on the Design, Construction and
Maintenance and Performance of Coastal Structures. Virginia, pp.939-952.
Khader, M. H. A., and Rai, S. P. (1981) Wave Attenuation due to Closely Spaced Circular Cylinders. International Association for Hydraulic Research XIX Congress, New Delhi, India, pp.95-102.
Losada, I. J., Silva, R., and Losada, M. A. (1996) 3-D Non-breaking Wave Interaction with Submerged Breakwaters. Coastal Engineering 28, pp.229-248.
Losada, I. J., Patterson, M. D., and Losada, M. A. (1997) Harmonic Generation past a Submerged Porous Step. Coastal Eng. 31, pp.281-304.
Mani, J. S., and Pranesh, M. R. (1986) Pile Breakwater Floating Barrier Interaction. Proc. 3rd Indian National Conf. on Ocean Eng., Dept. of Civil Engineering, IIT,
Bombay, India, pp. B217-B228.
Mansard, E. P. D., and Funke, E. R. (1980) The Measurement of Incident and Reflected Spectra Using a Least Square Method. Proc. 17th Coastal Eng. Conf., Sydney,
Australia, vol. 1, pp. 154-172.
Mohd Anuar, N. (2008) Performance of Perforated Piles as a Wave Attenuator, Master of Eng. (Coastal & Maritime) Thesis, Faculty of Civil Engineering, Universiti
Teknologi Malaysia.
Nagai, S. (1966) Research on Steel Pile Breakwaters. Proc. 10th Coastal Eng. Conf., Tokyo, Japan., ASCE, New York, N. Y., pp. 850-872.
Rao, Rao, N. B. S., Sathyanarayana, V. S. (1999). Laboratory Investigation on Wave Transmission through Two Rows of Perforated Hollow Piles. Ocean Eng. 26, pp.
-699.
Rao, S., and Rao, N. B. S. (2003). Energy Dissipation at Single Row of Suspended Perforated Pipes Breakwaters. Journal of the Institution of Engineers (I),pt CV, vol.
Sidek, F. J., and Abdul Wahab, M.A. (2007) The Effect of Porosity of Submerged
Breakwater Structures on Non-Breaking Wave Transformations. Malaysian
Journal of Civil Engineering. 19(1), pp. 17-25.
Thomson, G. G. (2000) Wave Transmission through Multi-layered Wave Screens.
Master Dissertation, Dept. of Civil Eng., Queen’s University, Kingston, Ontario,
Canada.
Ting, C. H., Lin, M. C., and Cheng, C.Y. (2004) Porosity Effects on Non-breaking
Surface Waves over Permeable Submerged Breakwaters. Coastal Engineering 50,
pp. 213-224.
Twu, S-W., Liu, C-C., and Hsu, W-H. (2001) Wave Damping Characteristics of Deeply
Submerged Breakwaters. Journal of Waterways, Port, Coastal and Ocean Eng.,
(2), pp. 97-105.
Van Weele, J., and Herbich, J. B. (1972) Wave Reflection and Transmission for Pile
Arrays. Proc. 13th Coastal Eng. Conf., Vancouver, B. C., Canada. ASCE. New
York, N. Y., pp. 1935-1953.
Wiegel, R. L. (1961) Closely Spaced Piles as a Breakwater. Dock and Harbour
Authority, Vol. 41, No. 491.4, pp. 77-81.