MECHANICAL PROPERTIES AND DURABILITY OF SOME SELECTED TIMBER SPECIES
DOI:
https://doi.org/10.11113/mjce.v24.15825Keywords:
timber trees, physical properties, strength, chemical environment, durability.Abstract
An investigation was carried out to study physical properties, strength and durability of some timber species commercially used in Bangladesh. Seven timber species namely Teak (Tectona grandis), Sal (Shorea robusta), Sil Korai (Albizia procera), Rain Tree (Samanea saman), Jam (Syzygium spp.), Jackfruit (Artocarpus heterophylus), and Mango (Mangifera indica) were tested for density, specific gravity, compressive, tensile and bending strength following ASTM standards. Four different kinds of chemical environments consisting of normal water, sodium chloride (5%), sodium sulphate (10%) and hydrochloric acid (5%) were made and tested for durability in terms of strength loss over a period of 90 days. The test results revealed that Sal, Teak and Jam were the best species of using as compression member while Sal and Teak showed the best performance in tension. In static bending Sal, Sil Korai, Teak and Jam have been found suitable. With respect to durability acidic environment has been shown to be the most aggressive agent. Saline water was comparatively safer for all kinds of timber species. Overall, the Rain Tree showed excellent performance in all chemical environments having minimum loss of strength, and Sil Korai has been found to be the most vulnerable one to the same environments among all the timber speciesReferences
ASTM D 143-94, (1994). Standard methods of testing small clear specimens of timber. American Society for Testing and Materials, Annual Book of ASTM Standards, Vol. 04.10.
ASTM D 2395, (1993). Standard test methods for specific gravity of wood and wood-based materials. American Society for Testing and Materials, Annual Book of ASTM Standards, Vol. 04.10.
Aziz, M.A. (1995). A Text Book of Engineering Materials, Revised Edition, Trans-World Book Company, Dhaka.
Bowyer, J.L., Shmulsky, R and Haygreen, J. (2003). Forest products and wood science- An introduction, 4th edition, Iowa State Press, ISBN 0-8138-2654-3.
Desch, H. E. and Dinwoodie, J.M. (1996). Timber: structure, properties, conversion and use, 7th edition. MacMillan Press Ltd., London.
Isabel, M., Vicelina, S. and Helena, P. (2011). Wood properties of teak (Tectona grandis) from a mature unmanaged stand in East Timor, Journal of Wood Science, Vol.57 (3), pp.171-178.
Lavers, G. M. (1969). The strength properties of timbers. Forest Products Research, Bulletin No. 50. Ministry of Technology, London.
Panshin, A. J. and Zeeuw, C. D. (1980). Text book of wood technology. Vol.1, 4th edition. McGraw-Hill Book Company, New York.
Parkes, G. D. (1963). Mellor’s Modern Inorganic Chemistry. The English language book society and Longmans, Green and Co. Ltd., London.
Sarker, S. B., Sattar, M. A. and Bhattacharjee, D. K. (1995). Physical, mechanical and seasoning properties of 45 lesser used or unused forest timbers of Bangladesh and their uses.
Bangladesh Journal of Forest Science, Vol. 24(2), pp. 11-21.
Sattar, M.A. (1997). Properties and uses of priority timber species. Bangladesh Journal of Forest Science, Vol. 26(2), pp.1-7.
Wangaard, F.F. (1966). Resistance of wood to chemical degradation. Forest Products Journal, 16(2).
Winandy, J. E. (1994). Wood properties. USDA-Forest Service. Forest Products Laboratory, Wisconsin, USA.
