PROPERTIES OF MULTI-BLENDED CEMENT MORTARS USING AGRO-INDUSTRIAL WASTES

Authors

  • Muhammad Aamer Rafique Bhutta UTM Construction Research Centre (UTM CRC) Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
  • Salihuddin Radin Sumadi UTM Construction Research Centre (UTM CRC) Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
  • Mohd. Warid Hussin UTM Construction Research Centre (UTM CRC) Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia

DOI:

https://doi.org/10.11113/mjce.v25.15837

Keywords:

Multi-blended pozzolanic admixtures, multi-blended cement, binary blended cement, workability, strength properties

Abstract

This study is conducted to investigate the performance of multi-blended pozzolan admixtures as partial cement replacement in cement mortars. Eight types of mixtures were prepared using various agro-industrial wastes as admixtures such as pulverized fuel ash, rice husk ash, slag, and palm oil fuel ash, of which four mixtures have different percentages of admixtures (Multi Blended Cement, MBC), and the others four are single mix (Binary Blended Cement, BBC). The experimental work initially deals with workability, compressive strength development, water absorption, and total porosity of MBC and BBC mortars cured at different curing conditions. The effects of different percentages of MBC and BBC mortars with different water-cement ratios were examined in terms of workability and compressive strength to achieve optimum mix proportions for MBC and BBC mortars. MBC system produced low permeability mortar compared to control, and BBC mortars. The strength properties of MBC mortars were more significant than control and BBC mortars when provided with appropriate curing

References

Abdul Awal A.S.M. and Hussin M.W. (1996a). Influence of palm oil fuel ash on strength and durability of concrete. In: Sjostrom C. (ed.). Durability of Building Materials and

Components 7 (Vol 1), London.

Abdul Awal A.S.M. and Hussin M.W. (1996b). Properties of fresh and hardened concrete containing palm oil fuel ash. In: Proceedings of 3rd Asia-Pacific Conference on Structural

Engineering and Construction, pp. 17-19.

Abdul Awal A.S.M. and Hussin M.W. (1997). Some aspects of durability performances of concrete incorporating palm oil fuel ash. In: Proceedings of the Fifth International

Conference on Structural Failure, Durability and Retrofitting, Singapore, pp. 27-28.

ASTM C 150-94 (1994) Specification for ordinary Portland cement.

ASTM C 989-93 (1993) Specification for ground granulated blast-furnace slag for use in concrete and mortar.

Chindaprasirt P, Homwuttiwong S, Jaturapitakkul C. (2007). Strength and water permeability of concrete containing palm oil fuel ash and rice husk–bark ash. 7. Construction and Building

Materials, 21(7):1492–9.

Chindaprasit, P., Rukzon, S., and Sirivivatnanon, V., (2008). Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash,

Construction and Building Materials, 22, 932-938.

Elahi, A., Basheer P.A.M, Nanukuttan, S.V, Khan Q.U.Z. (2010). Mechanical and durability properties of high performance concretes containing supplementary cementitious materials.

Constr Build Mater, 24:292–99.

Erdem, T.K, Kirca, O. (2008). Use of binary and ternary blends in high strength concrete. Constr Build Mater, 22:1477–83.

Hassan, K. E, Cabrera, J. G, Bajracharya Y. M. (1997).The influence of fly ash content and

curing temperature on the properties of high performance concrete. Proceedings of the Fifth International Conference, Vol. 1, Bahrain, p. 345-565.

Hassan, K. E., Cabrera, J. G., Head, M.K. (1998). The influence of aggregate characteristics on

the properties of high performance, high strength concrete. In: Rangan B, Patnaik A, editors. Proceedings of the International Conference. Perth, Australia, 1998. p. 441-55.

Khan, M.I. Lynsdale, C.J. and Waldeon, P. (2000). Porosity and strength of PFA/SF/OPC/ternary blended paste. Cement and Concrete Research, 30: 1225-1229.

Mehta, P.K. (1989). Pozzolanic and cementitious by-products in concrete: Another look. V.M.Malhotra ed. Fly ash, Silica fume, Slag and natural pozzolanic in concrete. SP 114,

Vol. 1, American Concrete Institute, Detroit, 1-45.

Mehta, P.K. (1994). Mineral admixtures for concrete: An overview of recent development. Advances in cement and concrete, Proceeding of an engineering foundation, July, Durham,

-256.

Neville, A., Aitcin, P.C. (1998). High performance concrete - an overview. Mater Struct 31:111-7.

Vanisha, M. and Rajiah, D. J. (2003). Performance characteristics of electric arc furnace slag

concrete, Master Thesis, Universiti Teknologi Malaysia.

Downloads

Published

2018-06-25

Issue

Section

Articles

How to Cite

PROPERTIES OF MULTI-BLENDED CEMENT MORTARS USING AGRO-INDUSTRIAL WASTES. (2018). Malaysian Journal of Civil Engineering, 25(1). https://doi.org/10.11113/mjce.v25.15837