THE EFFECT OF STACKING SEQUENCE ON TENSILE PROPERTIES OF HYBRID COMPOSITE MATERIALS

Authors

  • Suhad D. Salman Materials Engineering Department, Faculty of Engineering, The University of Mustansiriyah, Baghdad, Iraq
  • Zulkiflle Leman Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, 43400 UPM Serdang, Selangor, Malaysia
  • Mohamed Thariq Hameed Sultan Aerospace Manufacturing Research Centre (AMRC), Level 7, Tower Block, Faculty of Engineering, 43400 UPM Serdang, Selangor, Malaysia
  • Francisco Cardona Aerospace Manufacturing Research Centre (AMRC), Level 7, Tower Block, Faculty of Engineering, 43400 UPM Serdang, Selangor, Malaysia

DOI:

https://doi.org/10.11113/mjce.v28.15991

Keywords:

Hybrid materials, E-glass fibers, carbon fibers, epoxy resin, tensile test.

Abstract

Hybrid composite materials have found extensive applications in many areas such as in the medical field, aerospace, automobile and in the sport industry, between others. The effect of stacking sequence of glass/carbon fibers on the tensile behavior of the hybrid composites was investigated in this paper. Five groups of hybrid composite laminates were produced using various proportions of woven E-glass/carbon fibers reinforced epoxy matrix and subjected to tensile tests. The results showed that the hybrid laminations that consist of three layers of carbon and two layers of glass provided the best tensile properties. Group D showed the maximum force results (9255.7 N) and maximum tensile stress (382.7 Mpa). For three or less number of layers in the composites, when using carbon fiber layers more than glass fiber layers, the tensile strength was found similar. Otherwise, the tensile load increased with increasing number of layers. Moreover, for the tensile force and the stress of the hybrid composite samples that consisted of three or more layers, a significant effect of the stacking sequence was noticed.

References

ASTM (2012). ASTM D 638: Standard Test Method for Tensile Properties of Plastics. Annual

Book of ASTM Standards, Section 8, volumes 08.01.

Aucher J., Vieille B. & Taleb L. (2009). Etude comparative de l’influence de la temperature sur

le comportement de stratifiés tissés carbone à matrice thermodurcissable ou à matrice

thermoplastique, 19ème Congrès Français de Mécanique, Marseille, France; 24–28 août.

Banerjee S. & Sankar B.V. (2014). Mechanical properties of hybrid composites using finite

element method based micromechanics. Composites: Part B58, 318–327.

Cao S., Wu Z. & Wang X. (2009). Tensile properties of CFRP and hybrid FRP composites at

elevated temperatures. J Compos Mater; 43(4): 315–30.

Cheong S.K. & Lee S.H. (1997). Evaluation of tensile properties of carbon fiber reinforced

composite laminates with non-woven carbon mat. J Kor Soc Mach Tool Eng; 6: 96–100.

Chiang M.Y.M., Wang X., Schultheisz C.R. & He J. (2005). Prediction and three-dimensional

Monte-Carlo simulation for tensile properties of unidirectional hybrid composites. Compos

Sci Technol; 65:1719–27.

Fiedler B., Hojo M., Ochiai S., Schulte K. & Ando M. (2001). Failure behavior of an epoxy

matrix under different kinds of static loading. Compos Sci Technol; 61:1615–24.

Fotsing E.R., Miron F., Eury Y., Ross A. & Ruiz E. (2012). Bonding analysis of carbon/epoxy

composites with viscoelastic acrylic adhesive. Composites: Part B; 43:2087–93.

Fu S.Y., Lauke B., Mäder E., Yue C.Y. & Hu X. (2000). Tensile properties of short-glassfiberand

short-carbon-fiber-reinforced polypropylene composites. Compos Part A: Appl Sci

Manuf; 31:1117–25.

Fu S.Y., Lauke B., Mäder E., Yue C.Y., Xiao H. & Mai Y.W. (2001). Hybrid effects on tensile

properties of hybrid short-glassfiber- and short-carbon-fiber-reinforced polypropylene

composites. J Mater Sci; 36(5): 1243–51.

Guermazi N., Haddar N., Elleuch K. & Ayedi H.F. (2014). Investigations on the fabrication and

the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the

reinforcement and the repair of aeronautic structures.Tunisia, Materials and

Design 56,714–24.

Hatta H., Goto K. & Aoki T. (2005). Strengths of C/C composites under tensile, shear, and

compressive loading: role of interfacial shear strength. Compos Sci Technol; 65:2550–62.

Miwa M. & Horiba N. (1994). Effects of fibre length on tensile strength of carbon/glass fibre

hybrid composites. J Mater Sci; 29:973–7.

Moutier J., Fois M. & Picard C. (2009). Characterization of carbon/epoxy materials for structural

repair of carbon/BMI structures. Composites: Part B; 40:1–6.

Mutsuyoshil H. & Aravinthan T. (2010). Development of New Hybrid Composite Girders

Consisting of Carbon and Glass Fibers", Saitama University, & Toray Industries, Inc., Japan.

Pandya K.S., Veerraju C. & Naik N.K. (2011). Hybrid composites made of carbon and glass

woven fabrics under quasi-static loading. Mater Des; 32: 4094–9.

Rong M.Z, Zhang M.Q, Liu Y., Yang G.C. & Zeng H.M. (2001). The effect of fiber treatment on

the mechanical properties of unidirectional sisal-reinforced epoxy composites. Compos Sci

Technol; 61:1437–47.

Seung H.L, Hiroshi N. & Seong K.C. (2002). Tensile properties and fatigue characteristics of

hybrid composites with non-woven carbon tissue. International Journal of Fatigue 24 397–

Srivastava P., Ahire P., Chavan M.S., Sharma G. & Narsingh P. (2011). New hybrid Composite

Cable for Power transmission, Critical Signaling, & Telecom application . Sterlite Optical

Technologies Ltd. Silvassa. UT of Dadara & Nagar Haveli, INDIA.

Swanson S.R. (1997). Introduction to design and analysis with advanced composite materials.

Englewood Cliffs, NJ: Prentice Hall.

Velmurugan, R. & Manikandan, V. (2007). Mechanical properties of polymer/glass fiber hybrid

composites", Composites Part A: Applied Science and Manufacturing Vol.38, (10), 2216-

Yasmin A. & Danie I.M. (2004). Mechanical and thermal properties of graphite platelet/ epoxy

composites. Polymer; 45: 8211–9.

Ying S. & Kin L. (2002). Environmental fatigue behavior and life prediction of unidirectional

glass-carbon/epoxy hybrid composites. Int J Fatigue; 24: 847–59

Downloads

Published

2018-07-18

Issue

Section

Articles

How to Cite

THE EFFECT OF STACKING SEQUENCE ON TENSILE PROPERTIES OF HYBRID COMPOSITE MATERIALS. (2018). Malaysian Journal of Civil Engineering, 28. https://doi.org/10.11113/mjce.v28.15991