TESTING THE ACCURACY OF SEDIMENT TRANSPORT EQUATIONS USING FIELD DATA

Authors

  • Hydar L. Ali Hydar L. Ali Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
  • Thamer Ahamed Mohammed Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
  • Badronnisa Yusuf Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
  • Azlan A. Aziz Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

DOI:

https://doi.org/10.11113/mjce.v28.15996

Keywords:

Sediment transport equations, river, application, assessment, testing

Abstract

In order to recommend the equations that can accurately predict sediment transport rate in channels, selected sediment transport equations (for estimating bed load and suspended load) are assessed using field data for 10 rivers around the world. The tested bed load equations are Einstein, Bagnold, Du Boys, Shield, Meyer-Peter, Kalinskie, Meyer-Peter Muller, Schoklitsch, Van Rijin, and Cheng. Assessment show that Einstein and Meyer-Peter Muller equations have the least error in their prediction compared with the other tested equations. Based on the field data, each of Einstein and Meyer-Peter Muller equations gave the most acurate bed load estimations for three rivers while Schoklitsch equation and Du boys equation gave the most accurate bed load estimations for two rivers and one river repectively. The lowest values of Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were obatined from the applying Einstein equation for estimating bed load for Oak Creek River and these values were found to be 0.02 and 0.04 respectively. On the other hand, the tested equations for predicting suspended load are Einstein, Bagnold, Lane and Kalinske, Brook, Chang, Simons and Richardson, and Van Rijin. Among the above tested equations, assessment show that Bagnold, Einstein and Van Rijin gave the most accurtae estimation for the suspended load. The lowest values of Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were obatined from applying Bagnold equation and these values were found to be 0.012 and 0.015 respectively.

References

Ab. Ghani, A., Azamathulla, H. Md., Chang, C. K., Zakaria, N. A., Abu Hasan, Z. (2010).

Prediction of total bed material load for rivers in Malaysia: A case study of Langat, Muda

and Kurau Rivers. Environ Fluid Mech (2011) 11:307–318.

Brooks, N.H. (1963). Calculation of suspended load discharge from velocity and concentration

parameters.Proceedings of Federal Interagency Sedimentation Conference, U.S. Department

of Agriculture, Miscellaneous Publication no. 970.

Bagnold, R. A. (1966). An Approach to the Sediment Transport Problem from General Physics.

U.S. Geological Survey Professional Paper 422-J.

Brownlie, W. R. (1981). Compilation of alluvial channel data: Laboratory and Field. Rep. No.

KH-R-43B, California Institute of Technology, Calif.

Chang, F. M., D. B. Simons, and E. V. Richardson (1965). Total Bed-Material Discharge in

Alluvial Channels. U.S Geological Survey Water-Supply Paper 1498-I.

Cheng, N. S. (2002). Exponential Formula for Bedload Transport. Journal of Hydraulic

Engineering, vol. 128, no. 10.

Chien, N., and Wan, Z. (1999). Mechanics of Sediment Transport. ASCE, Reston, Va.

DuBoys, M. P. (1879). Le Rhone et les Rivieres a Lit affouillable. Annales de Ponts et Chausses,

sec. 5, vol. 18, pp. 141-195.

Einstein, H. A. (1950). The Bed Load Function for Sediment Transportation in Open Channel

Flows. U.S. Department of Agriculture, Soil Conservation Service, Technical Bulletin no.

Graf, Walter Hans (1971): Hydraulics of sediment transport. McGraw-Hill, Inc.

Lane, E. W., and A. A. Kalinske (1941). Engineering Calculations of Suspended Sediment.

Transactions of the American Geophysical Union, vol. 20, pt. 3, pp. 603-607.

Meyer-Peter, E., and R. Müller (1948). Formulas for bed load transport. Report on second

meeting of international association for Hydraulics Research, Stockholm, Sweden, pp. 39-64

Meyer-Peter, E., H. Favre, and Einstein, A. (1934). Neuere Versuchsresultate über den

Geschiebetrieb. Schweiz Bauzeitung, vol. 103, no.13.

Schoklitsch, A. (1950) Handbuch des Wasserbaues, [Handbook of Hydraulic Structures] 2nd

edn, Vienna, Austria: Springer.

Shields, A. (1936). Anwendung der Aenlichkeitsmechanik und Turbulenz forschung auf die

Geschiebebewegung. Mitteil. Preuss. Versuchsanst. Wasser, Erd, Schiffsbau, Berlin, Nr. 26.

Straub, L. G., (1935). Missouri River Report. In-House Document 238, 73rd Congress, 2nd

Session, U.S Government Printing Office, Washington, D.C., p. 1135.

Van Rijn, L. C. (2007, a). Unified view of sediment transport by currents and waves, I: Initiation

of motion, bed roughness, and bed-load transport. Journal of Hydraulic Engineering, 133(6),

p 649-667.

Van Rijn, L. C. (2007, b). Unified view of sediment transport by currents and waves, II:

Suspended transport. Journal of Hydraulic Engineering, 133(6), p 668-389.

Van Rijn, L. C. (1993). Principle of Sediment Transport in Rivers, Estuaries and Coastal Seas.

Aqua Publications, Amsterdam multiple pagination.

Yang, S. Q. (2010). Sediment Transport Capacity in Rivers. Journal of Hydraulic Research, vol.

, no. 3(2005), pp. 131-138

Downloads

Published

2018-07-18

Issue

Section

Articles

How to Cite

TESTING THE ACCURACY OF SEDIMENT TRANSPORT EQUATIONS USING FIELD DATA. (2018). Malaysian Journal of Civil Engineering, 28. https://doi.org/10.11113/mjce.v28.15996