CLASSIFICATION AND PROPERTIES OF DURICRUSTS FOR EXCAVATION PURPOSE
DOI:
https://doi.org/10.11113/mjce.v19.15746Keywords:
Desulfovibrio baculatus, FeSO4 Content, Immersion, MIC, SRB, Duricrusts, sedimentary rocks, mode of occurrence, rock textureAbstract
Although certain characteristics of duricrusts display a strong resemblance to clastic sedimentary rocks, in terms of lithology, they cannot be classified as rock. These ambiguities on classification may lead to several problems associated with excavation of duricrusts, particularly with regard to method used and rate of payment. In an attempt to draw some guidelines in evaluating the degree of excavatability of duricrusts, this paper highlights some of the fundamental differences and similarities between duricrusts and clastic sedimentary rocks. Laboratory and field data show that, in terms of texture and strength, duricrusts exhibit strong similarities to clastic sedimentary rocks. However, the origin of duricrusts does not fulfill the criteria for classification as rock. As such, for certain geologic materials, lithologic classification alone may not be sufficient to reflect their excavatability. Further verification on the material properties is also an essential aspect to be considered.References
Bickel, J.O. and Kuesel, T.R. (1982) Tunnel Engineering Handbook. London; Van Nostrand Reinhold Co., 670 pp.
Broch, E. and Franklin, J.A. (1972) The Point-Load Strength Test. International Journal of Rock Mechanics and Mining Science, 9: 669-697.
Dearman, W.R. (1974) Weathering Classification in the Characterisation of Rock for Engineering Purposes in British Practice. Engineering Geology, 9:33-42.
Fauiran, A. and Jeje, L.K. (1983) Humid Tropical Geomorphology. London: Longman, 527 pp.
Fauzilah Ismail (2002) Excavatability of Hard Materials Based on Laboratory and Field Assessments. Disertasi Sarjana Kejuruteraan Awam, Universiti Teknologi Malaysia, Skudai,
Johor.
ISRM (1981) Rock Characterisation Testing and Monitoring, ISRM Suggested Methods. Commission on Testing Methods, International Society for Rock Mechanics. Oxford:
Pergamon Press Ltd., 211 pp.
Jerry Chua Kuo Seng (2004) Classification of Hard Materials for Contract Documentation. Disertasi Sarjana Keuruteraan. Awam, Universiti Teknologi Malaysia, Skudai, Johor.
McLean, A.C. and Gribble, G.D. (1979) Geology for Civil Engineers. London: Chapman & Hall, 310 pp.
Mohd For Mohd Amin, Jerry Chua Kuo Sheng, Fauzilah Ismail and Edy Tonnizam Mohamad (2005) Classification and Rippability of Duricrusts. Jurnal Kejuruteraan Awam, Faculty of
Civil Engineering, UTM Skudai, Johor 17 (2): 18-29.
Pettifer, G.S. and Fookes, P.G. (2004) A Revision of the Graphical Method for Assessing the Excavatability of Rock, Quarterly Journal Engineering Geology, 27: 145-164.
Pitts, J. (1984) A Manual Geology for Civil Engineers. Singapore: World Scientific Publishing, 216 pp.
Saunders, M.K. and Fookes P.G. (1970) A Review of the Relationship of Rock Weathering and Climate and its Significance to Foundation Engineering. Engineering Geology, 4: 289-325.
Singh, B. and Goel, R.K. (1999) Rock Mass Classification, A Practical Approach in Civil Engineering 1st edn. Oxford: Elsevier Science Ltd., 267 pp.
Stillborg, B. (1986) Professional Users Handbook for Rock Bolting. Germany: Transtech Publication, 144 pp.
Waltham, T. (2002) Foundations of Engineering Geology. 2
nd edn. London: Spon Press, 92 pp.
