PREDICTION OF SOAKED CBR USING INDEX PROPERTIES, DRY DENSITY AND UNSOAKED CBR OF LEAN CLAY

Authors

  • Sheikh Shahriar Ahmed Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
  • Nusaeir Hossain Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
  • Abdul Jabbar Khan Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
  • Mohammad Shariful Islam Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

DOI:

https://doi.org/10.11113/mjce.v28.15975

Keywords:

Soaked CBR, equivalent single axle load, unsoaked CBR, sub-grade, lean clay.

Abstract

Load bearing capacity of subgrade soil is of great importance to the integrity of pavement. Soaked CBR of subgrade soil is used as a design parameter for determining the total thickness of a pavement for an estimated ESAL. However, determination of soaked CBR values for pavement design involves soaking a large number of representative soil samples for four days. This is both time consuming and economically discouraging. Establishment of mathematical models for determining soaked CBR values for different types of soils using their index properties, dry densities and unsoaked CBR values is likely to aid design more quickly. With this background in mind, in this study soil samples were collected from sub-grade of an existing flexible pavement in Savar Cantonment Area, Dhaka, Bangladesh. The soil samples were then tested and the index properties were determined. The tested soil samples were identified as Lean Clay and CBR test was performed both in soaked and unsoaked conditions at different densities. The test results of the sample soil have led to the formulation of three empirical equations for predicting soaked CBR values. Index properties of soil from grain size analysis, Atterberg limits test and compaction characteristics from CBR test are used in the first equation to predict soaked CBR value of this lean clay soil. The second equation relates dry density with soaked CBR whereas the third equation relates unsoaked CBR with soaked CBR values for a varying range of dry densities. These equations may be used to predict soaked CBR value where the sub-grade consists of Lean Clay.

References

ASTM D 4318 (2004). Standard Test Methods for Liquid Limit, Plastic Limit and Plasticity Index

of Soils, ASTM International, West Conshohocken, PA.

ASTM D 2487 (2004). Standard Practice for Classification of Soils for Engineering Purposes

(Unified Soil Classification System), ASTM International, West Conshohocken, PA.

ASTM D 1883 (2004). Standard Test Method for CBR (California Bearing Ratio) of LaboratoryCompacted

Soils, ASTM International, West Conshohocken, PA.

BNBC (1993). Bangladesh National Building Code Housing and Building Research Institute,

Dhaka, Bangladesh.

LGED (2005). Road Design Standards Local Government Engineering Department(LGED),

Dhaka, Bangladesh.

NCHRP. (2001). National Cooperative Highway Research Program Guide for Mechanistic and

Empirical–Design for New and Rehabilitated Pavement Structures, Final Document,

Appendix CC-1: Correlation of CBR Values with Soil Index Properties, West University

Avenue Champaign, Illinois, USA.

Patel, R.S. and Desai, M.D. (2010). CBR predicted by index properties for alluvial soils of South

Gujarat. Proceedings of the Indian Geotechnical conference. Mumbai, India, 79-82.

Rakaraddi, P.G. and Gomarsi, V. (2015). Establishing Relationship Between CBR with Different

Soil Properties. International Journal of Research in Engineering and Technology, 4(2),

pp.182-188.

Ramasubbarao, G.V. and Siva Sankar, G. (2013). Predicting Soaked CBR value of fine grained

soils using index and compaction characteristics. Jordan Journal of Civil Engineering,

(3): 354-360.

Sathawara J.K. and Patel A.K. (2013). Comparison between Soaked and Unsoaked CBR.

International Journal of Advanced Engineering Research and Studies, 2 (1): 132-135.

Satyanarayana Reddy, C.N.V. and Pavani, K. (2006). Mechanically Stabilised Soils-Regression

Equation for CBR Evaluation, Proceedings of the Indian Geotechnical Conference,

Chennai, India, 731-734.

Vinod, P. and Reena, C. (2008). Prediction of CBR Value of Lateritic Soils Using Liquid Limit

and Gradation Characteristics Data. Highway Research Journal, IRC, 1 (1): 89-98.

Yadav, D., Jain P.K. and Kumar, R. (2014) Prediction of Soaked CBR of Fine Grained Soils

from Classification and Compaction Parameters. International Journal of Advanced

Engineering Research and Studies, 3 (4): 119-121.

Yildirim, B., and Gunaydin, O. (2011). Estimation of California bearing ratio by using soft

computing systems. Expert Systems with Applications, 38(5), 6381-6391.

Downloads

Published

2018-07-16

Issue

Section

Articles

How to Cite

PREDICTION OF SOAKED CBR USING INDEX PROPERTIES, DRY DENSITY AND UNSOAKED CBR OF LEAN CLAY. (2018). Malaysian Journal of Civil Engineering, 28(2). https://doi.org/10.11113/mjce.v28.15975