ANALYTICAL STUDY OF SHELL THICKNESS VARIATION MODELS FOR NATURAL DRAUGHT COOLING TOWER ON VERTICAL PILE FOUNDATION

Authors

  • N.V. Vamsee Krishna Department of Civil Engineering, JNTU, Kukatpally, Hyderabad, 500085, India Hyderabad, India
  • K. Rama Mohana Rao Department of Civil Engineering, JNTU, Kukatpally, Hyderabad, 500085, India Hyderabad, India

DOI:

https://doi.org/10.11113/mjce.v28.15979

Keywords:

Alternative fuel, Biofuel, Ethanol, Gasohol, Gust factor method, meridional bending moment, circumferential shear stress, natural draught cooling tower, shell thickness.

Abstract

Natural Draught Cooling Tower (NDCT) is an important and essential structure in nuclear and thermal power stations as it contributes both to the energy efficient output and balance to an environment. From the structural point of view, high rise concrete structure is subject to various dynamic loads in an unfavorable way. Wind loading is important in NDCT design for structural safety, elastic stability, vibration properties and the initiation of concrete cracking in comparison to other structures. The behavior change of NDCT due to the variation of shell thickness when NDCT rested on a vertical pile foundation is very interesting. Therefore, the objective of the present paper is to briefly present the finite element modeling and analytical study of NDCT with twenty-seven different types of shell thickness models for the same height of NDCT. Each model is identified based on the separate case number from 1 to 27, and FEM analysis was carried out using Staad Pro-V8i software considering gravity loads, wind load. Further, design wind pressure at different levels along the height of NDCT was calculated as per IS 875 (part 3) 1987 code after applying Interference factor (IF) of 1.573. Due to the lack of wind study findings, the IF was considered as 1.573 while the maximum value of IF was 1.43 as per BS: 4485 (1975). Distribution of wind pressure at each level of NDCT in the circumferential direction was as per IS11504-1985. The overall study identified optimum shell thickness varying models to obtain the optimum foundation as well as super-stable structure. Further, the comparison was made between the guest and peak factor method and found that wind load due to gust factor method was critical and therefore recommended.

References

BS : 4485 (1995) British Standard, Water cooling towers., Structural design of cooling towers,

BS 4485: Part 4:1975.

Busch, D., Harte, R., Krätzig, W.B. and Montag, U. (2002) New natural draft cooling tower of

m of height. Engineering Structures. 24 (12): 1509–1521.

Gaikwad, T.G., Gore, N.G., Sayagavi, V.G., Madhavi, K. and Pattiwar, S. (2014) Effect of Wind

Loading on Analysis of Natural Draught Hyperbolic Cooling Tower. International Journal

of Engineering and Advanced Technology, 4 (1): 34–39.

IS 456 (2000) Indian Standard, Plain and Reinforced Concrete – Code of Practice, IS 456:2000.

IS 875 (1987) Indian Standard,Code of Practice for Design Loads (Other Than Earthquake) for

Buildings And Structures, Part 3 Wind Loads, IS 875-Part 3:1987.

IS 11504 (1985) Indian Standard,Criteria for Structural Design of Reinforced Concrete Natural

Draught Cooling Towers, IS 11504:1985.

Kulkarni, S. and Kulkarni, A. V. (2014) Wind and Buckling Analysis of Natural Draught

Cooling towers using ANSYS, ISRASE First International Conference on Recent

Advancesin Science & Engineering, ISRASE.

Mungan and Wittek (2004) Natural draught cooling towers. London (UK): Taylor and Francis

Group.

Murali, G. (2012) Response of Natural Draught Cooling Towers to Wind Loads.

InternationalJournal of Emerging trendsin Engineering and Development. 4 (2): 1-10

Murali, G., Vardhan, V.C.M. & Reddy, P.K.B. V. (2012) Response of cooling towers to wind

loads. ARPN Journal of Engineering and Applied Sciences, 7 (1): 114–120.

Orlando, M. (2001) Wind-induced interference effects on two adjacent cooling towers.

Engineering Structures, 23 (8): 979–992.

Patil, G., Nema, M.K. and Shrivastava, A. (2013) Structural Design of Tall Ndct Based On

Boundary Layer Wind Tunnel Experimental Studies on Group of Towers. In: Nagesh R.

Iyer, Prem Krishna, S. Selvi Rajan, & P. Harikrishna (eds.). The Eighth Asia-Pacific

Conference on Wind Engineering. [online]. 2013 Singapore: Research Publishing Service.

–363.

Prashanth, N. and Sulaiman, S. (2013) To study the effect of seismic loads and wind load on

hyperbolic cooling tower of varying dimensions and RCC shell thickness. International

Journal of Emerging Trends in Engineering and Development, 4 (3): 2249–6149.

Rasikan, A. and Rajendran, M.G. (2013) Wind Behavior of Buildings with and without Shear

Wall. International Journal of Engineering Research and Applications, 3 (2): 480–485.

VGB PowerTech (2010) Structural Design of Cooling Towers, Available from:

http://www.vgb.org/vgbmultimedia/download/Richtlinien_Merkblaetter Inhalt/VGB_R 610

e_Content.pdf

Downloads

Published

2018-07-16

Issue

Section

Articles

How to Cite

ANALYTICAL STUDY OF SHELL THICKNESS VARIATION MODELS FOR NATURAL DRAUGHT COOLING TOWER ON VERTICAL PILE FOUNDATION. (2018). Malaysian Journal of Civil Engineering, 28(3). https://doi.org/10.11113/mjce.v28.15979